What Are The Best Batteries To Put In My Aegis Geekvape?

Hi, so I have several different brands of 18650 batteries but I'm getting ready to pick up the new Geekvape Aegis X, I wanted to get some new batteries. I have been reading up on it but I'm so confused, I don't vape very high wattage It's always under 50 watt, 45 usually being the most, so what would be the best batteries for long activity? Any input would really help. Thanks  

So I just bought a kit, it doesn't come with batteries -- which I wasn't told (was led to believe it was charged through the USB port according to vape store employee). So I ordered x4 Nitecore-NL1834 18650 3400mAh 3.7 Protected Lithium Ion (Li-ion) batteries and now the door won't close. I read an old article saying that Protected 18650 can be bigger. If there's a possibility of buying batteries that cost $18 a pop shouldn't they let you know there's a chance that it won't be the right size?
Is there a trick to getting the battery lid to close or do I need to now buy unprotected 18650 batteries and hopefully get my money back on the protected batteries I bought?  

I've been using only twin-18650 mods for some time, and before the shipping ban came into effect, I bought a backup of my most-used mod (a Geekvape Aegis X), but since the 100W single 21700 / 18650 Voopoo Drag X Plus was only $35, I also picked up one of them as another backup.

I vape exclusively on RDA's, typically with a 3mm dual coil twisted build with 24 or 26 gauge Kanthal or nichrome-80. 5 or 6 wraps with 24 gauge, 6-8 wraps with 26 gauge. I typically vape these between 90 and 110 watts.

I did not expect to get a 'true' 90-100 watts out of the Drag X, so I set a target of around 60 watts. I mounted a 3mm dual coil twisted 28 gauge build with 6 wraps, which on my Aegis X vapes great at 60 watts, and very good at 50 watts. It measures at 0.45 ohms.

But on the Drag at 60 watts, it only vapes at what feels like 30 watts on my Aegis. Setting it higher makes no difference either, it seems to 'top out' at ~30 watts regardless of the setting. 60 watts @ 0.45 ohms is only around 11 amps, so I doubt I'm hitting an amperage limit.

I am using 18650 batteries (VTC5A), and it is about time to replace them, as I am only getting around 70% the battery life as I did when new. I will be picking up some 21700 batteries at the same time, which hopefully help with things on the Voopoo.

Does anybody have any good experiences with ~60 watt builds on a Drag X Plus?  

An online vape shop here at Greece at the description for dotBox Dual Mech mod says"

"Switch to Parallel Mode for longer Vaping time and exceptional power from two 18650 batteries".

The dotbox dual mech has the option to select series or parallel connection via a switch.
I send them a email that this doesn't apply (for the same power output always),for example 0.1 ohm coil in parallel connection and 0.4 ohm coil in series connection.

Two batteries in series provide the same amount of watt hours a parallel connection does.

The vapeshop replied and told me that the description is copy and paste from Dotmod.com

Indeed.
QUOTE from dotBox Dual Mech - dotmodretail
"Last Longer. Switch to Parallel Mode for longer Vaping time and exceptional power from two 18650 batteries".

The vape shop also said that the voltage sag at parallel connection is spread out over the two batteries in Parallel.Thus more vaping time than using a series connection.

Okey I made the calculations for voltage sag using for example two Sony VTC5A 18650 batteries with a DC Internal Resistance = 18.6mOhms (0.018 ohm).

I got the same voltage sag 0.378 V in both configurations (0.1 build in parallel-0.4 build in series).

Am i correct or am I missing something?(i'll send to the vape shop the link for this thread so they can read your opinions because i think they believe i'm talking bulls..t!  

So i was thinking of starting a thread which might list every mod past and present which would be compiled by you from one day to the next. At first i thought it wouldn't be practical because no one would know if a mod had been added unless they read through the entire thread.

Then i thought if a list from A though Z were compiled systematically by members by copying and pasting the most recent list in this thread, and then contributing to it, ensuring your entries are inserted alphabetically (Even if it's only one or two mods), then eventually this thread could contain pretty much every mod that exists, and would be updated regularly, by you !. No pictures please !. Only brief descriptions such as "company name / name of mod / type of mod".

What better place for such a list than ECF, "The world's largest e-cigarette website.

Here's my contribution to start it off :


____________________________________________

Pioneer4you IPV 3 150 watt box mod (2 18650 batteries)

Pioneer4you IPV 4 100 watt box mod (2 18650 batteries)

Provape Provari V2.5 "Polished stainless steel" tube mod (1 18650 battery)

SIGELEI 100 watt Plus box mod (2 18650 batteries)

Smoant Charon TS 218 box mod (2 18650 batteries)

Tesla advanced vapourizer 6 volt -15 watt VV/VW Tube mod (single 18650 battery).

Vamo V7 40 watt tube mod (Single 18650 battery)

Voopoo Too 180 watt tc box mod (2 18650 batteries)

________________________________________


it's a list of all the mods i own at this present time.

If you're going to add to the list then you can add any mods you can think off as long as you place those mods into the existing alphabetical order ( description should start with the company name). Batteries such as, say, vision twist aren't mods so lets not get into those. Tube mods and box mods (Includes internal/built in battery mods) only please (Squonkers included)

And lets not forget Mechanicals.

If you think a previous desciption is incorrect then correct it.

Ensuring company names come first in your description will enable a logical, consistant "alphabetical" understanding of the list by anyone who views it.

If you don't know the name of the company who made the mod just insert the name of the mod etc.  

Three and 1 half years ago a cancerous tumor was found in the upper lobe of my right lung. The 1/2 pack of cigarettes I had in my pocket were thrown away when I left the doctors office right after the discovery. I have not put one in my mouth since. I had surgery to remove the lobe.
Being seriously addicted to nicotine I asked my vaping daughter to get me started. She came up with some pencil batteries and a Kanger Protank Mini II. I replaced it many times during the last 3+ years with the same tank only "upgrading" to Eleaf Istick batteries. I worked my way down to .2% nicotine juice. I drilled out the air holes in the Protank to get more air flow. Battery life was minimal and refills on juice were frequent, vape clouds were small. I only went to 1 or 2 vape shops through the years not knowing what questions to ask for help with equipment, I just continued with the same set up. The neighbors daughter had an outfit that produced billows of vapor and a dandy looking outfit to do it with. I asked her what the brand was.... she didn't know and there was no writing on the unit.
I've came here looking for help but not knowing what questions to ask. I just looked.
The other day I was reading the GeekVape board and found someone asking for recommendations for an outfit. Most of the posters suggested an Aegis Cerberus 100W unit. I decided to order one. I have some 18650 batteries laying around. It came yesterday. I fired it up, made some adjustments and WOW what a hit. Seems to be a dandy outfit, sturdy and well made........ I ordered another one last night.

BTW I visit and Oncologist regularly and so far I'm cancer free.  

Hi everyone,
Hope your all having a great weekend! Hopefully someone can help me figure out any good canadian or American reputable vendors for 18650 batteries for my arrow sense mod. Out of all the vendors listed in the battery thread, only one had the batteries I wanted, but it was in the US and would cost over $50 for shipping. Hoping to find shipping for $20-30 canadian instead. I am particularly interested in the batteries on the forums listed as tested by mooch in a stickier post. Or Sony battery with 2500 mah , I like to vape with two 18650 batteries at 60-80 watts.  

I have a pair of new batteries that are green 18650's that say "Danger: Do not use outside of battery pack." The numbers are very faint but appear to be SE US 1865 UTC6 C6/ G 0964 8812K05P 144. I don't remember when I bought these or where from, but I buy only at reputable batteries sites. Any help would be appreciated. I am afraid to use them.  

I have a CLT v2 Plus and a Mutation X v2 running on a Sigelei 150w and an Asmodus Klone v1.5. I am a cloud chaser, just to get that out of the way. Both attys on both mods used to CHUCK the clouds like nobodys business. My builds have not changed, if anything I have gotten much better at it obviously with time and practice. But boths attys on both mods just don't do what they used to. Neither performs in a way that is something to be "ashamed" of, if you will. But they don't do near what I used to get out of them. Maybe it's the batteries? I have 10 18650 batteries, all have been in even rotation for a while now. Although I would think it wouldn't be such a big deal in the Sigelei, it being regulated and all, right? Or maybe I just suck and don't know it? I am not against getting new atomizers, as I love throwing away hard earned money on vape gear I don't really need as much as the next ECF member, but still. Thoughts?  

Just bought a brand new pair IMR 18650 2500mah batteries, when they start getting low and you're getting late fee from batteries did you take them out and charge them or let them drain completely, the mod shows a little juice left in them but I'm getting a very light vape.