Mesh Upgrade From Big Baby/x Baby User

So admittedly I dont know if this counts as m
odding when people are building actual boxes to fit atomized and house batteries from scratch but what's everyone think about this addition its a new use for something I dont use anymore the top to the tank of my evod 2 built by aspire a just kinda screwed it into the wide gauge tip of my baby beast sub ohm tank I'm using the .15 mesh coils and tightening the draw and I find that I can get quite lot of flavorful vapor at 40 watts and 2.70v set to hard hit on my aspire skystar

Curious what anyone might think of this and if anyone maybe has some other easy DIY flavour chase inovations  

I have been vaping for 4 years now. I am using the baby beast tank. I have 3 of them.
I have never used anything else because,, well, it works fine for me. My problem is that I am having a hard time finding coils. I used to by clone coils on ebay for dirt cheap. There are no longer any coils on ebay. I cant find any coils online. They are either out of stock; or very expensive. What do people do nowadays? Do people still use the baby beast or has everyone
changed to something cheaper/better? I always use Q2 .4 Ohm coils. I only found 1 place online that has them and they are $20 for 5 of them (including shipping). What would you guys do? I was so happy with the clone coils. They were inconsistent but cheap. Some would last 3 days and some would last 10 days; but for $1.35/each I was happy.
Thank you for any advice you can give.
MrElder  

Hello, I have a question about some coils i had laying around from my previous vape.
Can i put my old V8 BABY-Q2 (O.6 Ohm) in my new aegis mini cerberus tank or would this cause problems?
Thanks in advance.  

Hi I've been in the vaping industry for years now and have had many tanks over the years both mesh and normal coil, for me mesh was amazing at flavour and for more cooler vape lovers, however I found that normal coils provided more cloud and less juice consumption with some tanks and were able to achieve the same amount of flavour as mesh with the right build. But I still curious as too how many people prefer mesh over normal coils and vice versa and why ?  

I got tired of toting around my "vape box" everyday at work. (I work out of a truck, so not that big of deal) so now I've limited myself to three mods a day...today is baby box mod monday.


what's everyone else got with them today?  

Hi.
I hope this is right section to write and ask for some help.
So purchased Smok Xpriv baby kit couple months ago .
Is it normal that battery dies so quick ? I vape mostly at 45w and my day starts at 7.00 and around 13.00 the battery is dead .And I do get to vape only on my way to work (30min walk) and in launch break.

And charging takes for ages as well .Tried chargers tried charging directly from PC but no difference.

Any owners has similar issues or mine is just faulty ?  

So I've managed to get my first build on my Kennedy vindicator 28mm and I feel like it just doesn't hit as hard as my pharaoh on an ijoy baby avenger. I'm assuming it's my coils got a bend in the legs when installing and it's messing with how fast it ramps up I guess. It is definitely a nice cool hit just was expecting to get punched in the lungs by it maybe when I'm more experienced with building I'll get it just right. Switched to mechs not for a harder hit necessarily but to not have to worry about a regulated mods crapping out due to random issues.  

Im new to external battery mods but have been vaping for 3 years and I know how to prime a coil with e-juice. I go the extra mile after I prime the coil and let it sit for a minute. Then I fill up the tank put it back together and do not touch it for at least an hour or two just to make sure. I just got my now verified as legit sigelei sobra with the moonshot 120 both of the coils from that taste like those knock off BS eBay fake coils. I started off at a very low wattage and I don't know what's wrong both coils are disgusting. It's not exactly a burnt taste or a dry taste it's like a sour off taste and I can't use them. It also makes me feel like I have something in the back of my throat. What in the heck is going on? Do these coils take awhile to become usable? They're the coils that came with the mod and I verified the mod so I assume the coils are also okay. I even went so far as to try the second coil on a different mod but with the same tank just in case the mod was frying things the very first hit. Can anyone give me an idea of what's going on so I know what I need to do and also if anyone could tell me whether or not the Cascade baby coils will fit in the moonshot 120  

I'm so tired of the recent "mesh only" craze. I just don't understand it at all.

I have used roundwire sub tanks for close to 4 years, and can generally get a pretty accurate flavour representation from my juices. Obviously some are better than others, but the og Uwell Crown coils and .4 Cleito coils are pretty stellar.

Recently decided to mix it up and try something new, so i went on the hunt for a new sub tank, only for the market to be completely littered with mesh-only tanks. The only tanks i could find that still use roundwire are from years ago.

I figured i had been missing something, so i picked up a collection of mesh sub tanks, only to be dissapointed by every one of them.

The list was:
Ehpro Raptor with both the raptor coils and the Horizontech Falcon coils.
Innokin isub B.
Aspire Odan Evo.
Aspire Cleito Pro.
Geekvape Zeus.

I got absolutely zero of the liquid nuance that i get from 3+ year old roundwire coils. I just get a blast of full-on "all the flavours at once", and for juices with sweetener, that is the primary profile. Interestingly, i found that with fruit flavours, it was a little more palatable, but since i primarily vape bakerys this wasnt all that much use.

I figured i would give the mesh rta's and rda's a shot, as everyone is raving about them, so i picked up:
Wotofo Profile RDA.
Wotofo Profile Unity RTA.
VandyVape Mesh RTA.

Tried all of them, same dissapointing experience. They were basically mesh sub tanks in RTA form. Literally exactly the same "flavour".

So, after wasting a chunk of money on all of these, im back to using the Cleito Pro with the 0.4ohm Cleito coils and the Uwell Crown Mini with the og Uwell Crown coils with the occasional use of the Wake Mod co RTA when i can be bothered to rebuild.

Is it just me? I dont understand the hype in any way. Maybe it's just my particular flavour profile doesn't work great with mesh, or maybe its just me, i dunno. It's just a shame to see that any recent sub tanks that come out are all mesh, apart from the very occasional sprinkling of roundwire thrown in here and there.

Anyone else have a similar experience? And have any recommendations on recent sub tanks to try that aren't just mesh?  

I'm really new to vaping. Well I've had a snow wolf for awhile, I quit and picked it back up after I turned 21 because the smoking age in Virginia raised. But anyway I never got the difference between these two. Are there really advantages to mesh??