K3 And 0.7 Ohm Coils?

Hi
Just wanted to see if anyone can advise about my Aspire K3 device and whether i can use 0.7 ohm coils in it which i recently bought in error?

Also any recommendations for decent e-liquids for a new user, recently quitting smoking in past 3 weeks and needing to find an e-liquid that gives that throat hit that's talked about so much.

Currently getting by with 'US Red' with slight amount of 'mint' flavour and find that the only time a 'throat hit' happens is when first vaping with the K3 but each time i use it followingthe first 'hit' is very weak. Unless putting it down for an hour then the first use is ok but after is rubbish.

Would i benefit from a larger device like Aspire X30 Rover Kit or EVO75 device (for smoking replacements primarily)?

Thank you  


Similar Content



I Got The Aspire Favostix Vape, But There's Little To No Throat Hit.

The device goes up to 30 watts and I'm using the .6 coil with 9 mg of nicotine ejuice. Did I get the wrong type of coil? I don't know much about different coils, so I took my best guess, but I'm disappointed wit the lack of throat hit. If anyone can tell me what is going on, I'd rely appreciate it.  

Help With Mixing Liquid?

I'm new to vaping, I started vaping because I'm getting tired of people complaining about the smoking odor after I smoke. And I don't even smoke that much, maybe 6-8 cigs a day.
I started trying out the Stlth about 3 weeks ago and got used to it, so I went to a store to get the refillable stuff. I bought a Caliburn device and the guy in the store recommended a juice from his own store brand.
After I got home I put the juice in the device and tried it but I couldn't feel the throat hit at all, the juice was 3mg, the Stlth I used was 3.5mg which had the perfect hit for me.
I went back to the store and asked if I can exchange for one with a higher Nic. He told me he can't take it back because I opened it, strange that if it's his own brand, couldn't he just refill it and reseal it in another bottle? I only used about 2ml so far.
But anyway, he told me the ejuice has smoother draw that's why there's no throat hit as NIC salt, I did some more research and found that it's the opposite of what I've read, everything I read are saying that ejuice has more throat hit than Nic salt.
Sorry for the long store, the bottle he sold me was 60ml ($30) which is a big waste to throw away. Is there anyway I can salvage this bottle by mixing it with something else to give me that little bit of a throat hit when I draw?  

The Ego One. Amazing, Yet Awful

So I purchased the eGo One after hearing amazing reviews of the device. I use an Aspire Atlantis on an MVP 3 but needed something more portable for work/going out. I was more than impressed with the eGo One using the .5 ohm coil, and equally so with the 1 ohm coil. The battery life is great, the flavour is perfect and the vapor production is unexpected. However, within 2 hours of using the .5ohm coil, the vapor began to taste burnt, more than on any other wick I have burnt. So until I could get hold of another I used the 1 ohm coil. 24 hours that one lasted. Joyetech said they would send me replacements free of charge, but while waiting for this I went to my local shop and bought another .5 coil. 1 HOUR LATER, it's frazzled. Wether I'm just being unlucky or the device is faulty I don't know, but I am incredibly disappointed. It's not through a lack of priming or using the wrong liquid, I'm an experienced vaper and had fully primed the wicks for 20minutes minimum and was using a 50/50 juice. This device had great potential, but it will be going in the bin for now (except the battery, which even does a great job on my Atlantis)  

Help Please. Mtl Device Suggestions.

Hello everyone.
My girlfriend is about to quit smoking cigarettes and start vaping and I was looking for pod systems online but couldn't decide which one to go with. I myself have been using the Aspire avp for sometime now. I like the device it's an amazing piece. But I do smoke as well I use the vaping system just for the flavor and high mg hit that's all.
So I was thinking to get some recommendations from the vaping community a friend of mine asked me to check out smok Novo 2 but I've read a lot of reviews regarding the leakage of the pod.
She will be using it long term so I'm not sure if the Novo 2 would be a choice considering the pod leakage. But still if it's a bomb device like many people say it is, and doesn't leak that often. Then I can consider buying that for her.
But I'm open to suggestions because I'm not so educated when it comes to vaping devices.
So any help will be appreciated.  

Aspire Nautilus Mini Bvc W/larger Wicking Holes, Stock

*I posted this in the Aspire Forums, but wanted to get some Feedback from my fellow ECF members*

Hi,
I bought a Aspire Nautilus Mini Premium Starter kit that came with the 1000mah VV+ battery a few months ago. It came with a 5 pack of 1.8 Ohm BVC coils. I have since bought 3, 5 packs of coils from 101Vape. They have all worked great, but 101Vape has ran out of stock.

I bought 2, 5 packs of 1.8 Ohm BVC coils from WORLDofVAPE. They came in the mail today and they also work (better) great, but they are not physically the same. They have the same markings and threading and post, but the wicking holes are 3 times larger. They are not in the middle, but run along the top of the threading. They say Aspire BVC 1.8 (3.3-6.0) CE and have the trash can picture on them. The packaging is exactly as the first 3 sets of 5 packs I have bought (including the pack that came with the kit). I have checked every security code and they all come back genuine.





Why do the BVC coils from World of Vape have larger intake holes on them? Are these a newer improved design? Did you start using different equipment or specifications to produce the BVC? Are these a different coil meant for a different tank? I would really like to know so that I can order the exact ones again in the future as I don't know when World of Vape will run out of stock. Any feedback would be great!  

I Am Back On Vaping

Two weeks ago I was rewicking my rta because I wanted a change of flavour and was changing flavour every 2 days as I am using only one mod.Anyway,I am always frustrated when I wicked badly,meaning it leaked or the vape quality is not up to my usual standard.I had wicked this specific rta for hundreds over time the past 3 month as it is my first rta.I learned to wick properly after almost 30 trial...that day after I wicked,it leaked when I am about to go out to play sports with my friends.I thought my wicking had no problem before I leaves but I find that it leaked all over my bag,and I was in a very bad mood because of that...that prompted my gf to asked me to quit and I promised her that I will do it.The next day I passed all my mod to her and started to used nicotine gum,I don’t planned to quit nicotine as I find it really benefits my mental health and make me focus on work better.While using nicotine gum,I started to use lesser and lesser and then wanted completely off it as it was so boring even though I got my nicotine fix well.Yesterday I couldn’t take it anymore,somehow I convinced my gf to return my vape and promised her I will quit in the future if we got married or had babies.

In the meantime,I also ordered a new mod and now a sub ohm tank so that I don’t need to wick everytime I change flavour as I will be switching different coils on different flavour.I am excited, and hoped that this mod and tank will be able to keep me satisfied.I am addicted to vaping,not smoking and to me personally,vaping is harder to quit simply because I enjoy vaping a lot more then smoking.I love vaping,I am also worried if I had to quit someday...  

Vaping "aged" Nicotine Liquid... Love It!

I've got 2 x bottles of Carolina 100mg PG liquid, both about 1 year old. I started mixing liquids with it today, and noticed that the nicotine mixture has begun to oxidize. This liquid is normally clear, but has begun to take-on a sort-of orange hue.

I mixed 2 x 60ml bottles of Mothers Milk, and 2 x my RY4 w/cheesecake and coffee. The oxidized nicotine liquid gives these liquids a tobacco-like throat hit that I haven't gotten since I quite smoking. It's the one thing that I've always missed about smoking. I could get this when mixing my liquids at 18mg, but never at 3mg.

I keep my liquids in the refrigerator, but I'm thinking I could maybe accelerate the oxidization process, by leaving the liquids unsealed?  

So Far How Much +/- Did You Spent On Vaping?

Been vaping and quited smoking last year December 07,2014. Until now, my set up is strictly just two (2). First Vivi Nova 3.5ml + a Vamo 6, with one spare tank and 3 wicks. Then after a month I bought a second set-up namely: Aspire Nautilus 5ml + a Cloupor mini 30W. I do have a have a bad habit of having/purchasing a replacement or emerency tank so I also have an Aspire Nautilus Mini and 5 spare BVC coils. Well my rough estimation is around less than USD200 including e-Juice which I got from friends... Marlboro and Cuban Cigar flavors.

I mix those two juices, because Cuban Cigar juice is almost perfect clear in color, while Marlboro is Light to medium yellow... while Cuban cigar CAN be vaped at 15up Watts without burnt taste, but lacks "Throat hit" so, I add 30/20 cuban /Malrboro for more throat hits... all at zero (0) nico. btw.

Goal is: to keep away from analogs, still play with moderate vapor and enjoy throat hits + the smell of cigar and try to save money. I consider myself a "Casual Vaper".  

E Cig Works Fine For About 5 Minutes Then Goes Burnt

I'm having trouble with my Jem Pen E cig - hopefully someone can help me.

I take the coil out clean the tank and battery area, put it back in with liquid + prime the coil. for about 5 minutes it tastes fine and is vaping as normal. then a really horrible burnt taste comes in which is unbearable to smoke and making my throat hurt.

I take the coil out and clean again, put more liquid. the same thing happens! it tastes absolutely fine again and then gets burnt.
any idea why this is happening ? the device gets quite hot too...
i don't think the coil is the issue because why does it taste fine for a few mins?
I've ordered new coils so going to try that but worried its the device. i've only had it for 2 weeks and changed the coil about 5 days ago.  

What Is It With Mesh?

I'm so tired of the recent "mesh only" craze. I just don't understand it at all.

I have used roundwire sub tanks for close to 4 years, and can generally get a pretty accurate flavour representation from my juices. Obviously some are better than others, but the og Uwell Crown coils and .4 Cleito coils are pretty stellar.

Recently decided to mix it up and try something new, so i went on the hunt for a new sub tank, only for the market to be completely littered with mesh-only tanks. The only tanks i could find that still use roundwire are from years ago.

I figured i had been missing something, so i picked up a collection of mesh sub tanks, only to be dissapointed by every one of them.

The list was:
Ehpro Raptor with both the raptor coils and the Horizontech Falcon coils.
Innokin isub B.
Aspire Odan Evo.
Aspire Cleito Pro.
Geekvape Zeus.

I got absolutely zero of the liquid nuance that i get from 3+ year old roundwire coils. I just get a blast of full-on "all the flavours at once", and for juices with sweetener, that is the primary profile. Interestingly, i found that with fruit flavours, it was a little more palatable, but since i primarily vape bakerys this wasnt all that much use.

I figured i would give the mesh rta's and rda's a shot, as everyone is raving about them, so i picked up:
Wotofo Profile RDA.
Wotofo Profile Unity RTA.
VandyVape Mesh RTA.

Tried all of them, same dissapointing experience. They were basically mesh sub tanks in RTA form. Literally exactly the same "flavour".

So, after wasting a chunk of money on all of these, im back to using the Cleito Pro with the 0.4ohm Cleito coils and the Uwell Crown Mini with the og Uwell Crown coils with the occasional use of the Wake Mod co RTA when i can be bothered to rebuild.

Is it just me? I dont understand the hype in any way. Maybe it's just my particular flavour profile doesn't work great with mesh, or maybe its just me, i dunno. It's just a shame to see that any recent sub tanks that come out are all mesh, apart from the very occasional sprinkling of roundwire thrown in here and there.

Anyone else have a similar experience? And have any recommendations on recent sub tanks to try that aren't just mesh?