Defective Sony Vtc5?

So i just got the nitecore 1a charger in the mail today for my 18650. Previously i was using the usb charger to charge it on my ipv mini 2 but i haven't tried the nitecore yet. about how long would it take to charge this battery on my nitecore?  

I'm charging a purple EFEST IMR battery in an XTAR LI-ION battery charger and I wanted to make sure Efest IMR purple is actually covered under LI-ION charging.. I can upload pictures in a second but I've been charging the battery for about an hour and this is my first electrical mod so I am trying to make sure, thank you. It says it is for rechargeable Li-ion batteries only but so far the battery is not hot or any problems  

Me again with battery questions

I ordered and paid for Samsung 25Rs from my local vape shop. They just informed me that they made a mistake and that battery is not currently available, and have offered me these as replacement:

Sony VTC5

Sony VTC4

LG HE2

LG HE4

Should i take any of these or should i wait for the samsungs to become available again? (who knows when that will be)

I'm leaning towards the VTC5 just looking for some confirmation from you guys that that is the right choice !

Oh and i should mention, the top wattage i will be hitting is 30w and i do not sub ohm.
Thanks!  

I bought my Sigelei 100w Plus a few days back and ordered 2 Sony VTC4's on my same order (I'm confident they're legitimate, I've bought some before) to be able to marry them together and use them with my Sigelei. Upon receiving the batteries, I labelled one A, and one B and put them into my charger at the same time (charger was off, put both in and turned it on), one battery is slightly more charged than the other (it's 2/3 bars, while the other is still 1/3). I'm a bit worried about using married batteries, I understand rotating A and B in my Sigelei and charger but will they be the same charge when they're done? They're new batteries and they both went on at the same time yet one of them is charging a little bit faster.

When both of the batteries are fully charged, will they be safe to use and cycle accordingly? I heard about if one battery has even a tiny bit less, the batteries will take an uneven load and it will make it risky. How do I ensure that these batteries remain married?  

Can I use an external battery pack to charge an IPV Mini?

I have a 10,000mAh external battery to charge my cell phone (Note 4, with a 3500mAh battery), which has 2 options for charging: 1.5v=1A and 2.5v=2.1A.

Is it recommended? Is it safe? Are there any precautions I need to take if I use the battery pack?

I haven't gotten around to getting an extra 18650 battery (and charger) for the IPV Mini. I've finally realized that it takes maybe 2-3 hours to charge the battery via the USB cable. But the one battery doesn't quite last me all day, depending on how heavy I'm using the Mini.

I usually carry a Volcano Inferno once the Mini dies, but the Volcano really sucks in comparison to the Mini. I'd love to be able to charge the Mini while I'm out and about.

I've added a pic of the external battery for specific information.


Thanks for all your help.  

I've been charging my 18650 batteries on a Nitecore charger but having to unscrew my Smok XPRO m65 is a real pain so thought I may as well make use of the USB port and charge the battery while it's still in the mod.
But I've been hearing a few horror stories of other mods such as the clouper, apparently its not safe to charger using the USB port

I'd really appreciate it if anyone can help inform me if I'd be able to use my phone charging adaptor with my mod.

The input and output specs of my phone charger and mod input are in the attached pics.

Cheers everyone  

my vaporizer has a battery of 2800 to
was charging on a 2a 5v charger
carried about 3 full charges.
so the manufacturer recommends a 1 to 5 v charger
tripled charging time instead of decreasing.
do I continue with 2a instead of 1 a?
can give problem ???
thanks  

Hi
I just got a Xtar VC2s charger for my 21700 batteries (Samsung 40T).
Chose that charger also because it "charges at safe low current".

When it charges 2 batteries, it's at about 1000 mAh for each battery. All good.
But when charging only one battery, it charges it at 2000 mAh. Hmm?

I assume 2000 mAh is still "safe".. But won't that reduce lifespan on the battery?

The charger manual says "when the power supply is insufficient, the charger will reduce the charge current correspondingly".
So maybe I should get a usb power supply with like 1000 mAh output?

I will only be charging one battery at a time, and prefer charging slowly if that gives more safety and lifespan.

But I don't know if charging at 2000 mAh is really an issue..  

I just got an istick 30w the other day from a local tobacco store. I bought an istick 30w for $45 which isn't too bad, I'm having problems with it not charging to full. I am using a 1a rated charger and it is supposed to charge to full in exactly 2.5 hours with a dead battery. I cannot get it to charge above about 75-80%, no matter what I do. As of now it's been on the charger for 2 hours and 38 minutes and is at about 80%, and is showing no sign of continuing to charge.

When I leave the device on overnight, I will wake up and it will be at around 65%, and it would have just stopped charging. I don't understand.  

I have a Sony vtc5 that won't charge. It was charged and working fine. It wasn't hot, did not vent, it just stopped working. Any reason this would happen? It's not my rda or mod because I put my other vtc5 in the mod and it fired just fine.