Smok Infinix Not Pulling

Hello,
I own the SMOK Infinix for more than 3 months now. I change the cotton myself for the pod and started having issues with the device.

After 2 months it would fire a while after pulling. Fixed by cleaning the inside of the device and removing the paper cover on the sensor. Worked perfectly.

Now, few days ago, I noticed I had to pull harder for the device to activate.

And now, literally an hour ago it would stop pulling. Isolated the airflow for a tighter pull worked for couple of minutes, now it just stopped. After some blows from the charging port it would do the infinite firing bug and that's the only way I can get a hit. Please help.

P.s I did clean the inside of the device again as much as I could. It gets a really good connection, just won't fire.  


Similar Content



Hi.

My fetch pro stop working. Hubbys stop first i can charge his and its fine take it off the charger and nothing. Then today my screen went dim i can't even get a hit from it. Question what is the best device out there. He had a smok wocket after 2 months his stop charging and my wocket still works fine. Need a better brand then smok any good suggestion. HELP  

Broken Mod

So i got a smok gpriv deluxe edition about 3 months ago. Its worked perfectly but then i let it sit unused for around 1 month. Now when trying to charge the batteries nothing works. Its not showing any signs of life. Im currently charging one battery in a smok grip but its still on 0 percent after 20 minutes of charging. Is it a battery issue? Or a mod issue  

Aspire Breeze Auto Firing..

So do any knows if aspire figure out why the device is auto firing on it’s own. If not I been sitting and trying to figure out why? I been reading a lot and seeing people saying it’s a button malfunction, but I been messing with it. I seen that the air draw switch on top of the device goes inside air hole under the tank which controls the draw to auto activate was tilt and had juice around it. So I clean it and I reposition the switch back to the center. Mash it down to see if the auto draw react and it did and now it’s working properly. It could of been just me or aspire just didn’t understand there own device.. ‍♂️  

What To Replace The Juul With?

I began vaping in 2013. It was a basic setup: Ego Twist with a couple of Vivi Nova tanks.
It took some trial and error but found a couple of juices that I liked and stuck with them. Started
at 18 mg and settled on 12 mg nicotine level. The Ego was nothing special, but it seemed to work well at the time as I quit smoking for an entire year with it. As time wore on, I began getting to get more and more burnt / dry hits. Seemed to be happening all the time. Went through countless coils and it became such an issue that I finally got tired of messing with it and quit vaping. Went back to cigarettes. Looking back, I believe I was using a High VG or possibly Max VG liquid which may have been the cause. Desperate to get off cigarettes again I tried again last year. Bought several starter kits including Innokin IO and Innokin Endura T22. Did not like either of these. Just seemed to give me a headache even after just a couple of puffs. I tried both with 12mg and 6mg. Did not notice much of a difference. I just did not get the satisfaction I remember from years earlier. So gave up on vaping again and went back to analogs.

It is now 2019 and I am really sick and tired of smoking cigarettes. I hate them but can’t stop.
Along comes the JUUL, I decided to give it a shot and just figured it would not work.
At first I did not like it. Seemed WAY to strong at 5%. Stuck with it for a week and thought - hey this is not bad. Mainly was using Virginia and every once in a while a Mango pod was nice (Maybe ½ to 1 full pod a day). I was still smoking a couple of cigs in the morning but after that I would use the JUUL the rest of the day. It was by no means great but good enough. I would constantly struggle to get a decent hit off of it though. There always seemed to be air bubbles in the pods causing a problem or I had to pull the pod out and put it back in just to get it to hit decently. Like I said just good enough. After about 6 months or I started have stomach issues. Mainly really bad gas and thought it might be due to the higher nic level in the 5% pods. So I dropped down to 3% for a month or so and noticed no difference. Finally decided to quit the JUUL altogether to see if it made any difference. Within a week everything went away and was back to normal. No more JULL for me. I am guessing something in the Nicsalts didn’t agree with me. I never had this issue with freebase nicotine.

So, am now looking for a device to replace the JULL that does not use nicsalts and was hoping to get some recommendations. I do not need a big mod device to blow clouds or anything like that.
I want something very simple that hits well and does not burn. I am open to anything really as long as it works. I do prefer MTL style and have heard good things about the Joyetech AIO as well as the SMOK infinix devices. I am really open to anything that will work well. Prefer something small, easy to use and that fits in my pocket. Also, I prefer tobacco flavors and am planning to try out the Blacknote stuff which is a 50/50 PG/VG mix so looking for a device suited to that. Any advice or recommendations would be appreciated. Thanks!  

I (don't) Love My Smok Nords

When I got my Smok Nords a few months ago I created a thread "I love my Smok Nords". So everything was fine until about 30 minutes ago when I started to smell a real bad melting smell while at work. When I went for a vape I took out my two Nords and one seemed very hot so I smelled them and sure enough something dangerous was happening to the batteries. I quickly ran outside and threw the two Nords into the street. Now I need to come across a new pod system. This is now two strikes, first my Alien, now the Nords but I won't give myself a chance to get three strikes, that's playing with fire literally.  

How Long Have You Been Vaping, And What Device Enabled You To Stop Smoking?

I stopped smoking, and started vaping 2 years & 2 months ago

My magical device was an Innokin Endura T18 vape pen, followed by the Innokin t22 kit




I would love to hear what other members used to stop smoking  

Labor Day Sale... Moji And Mojo For $1

I don't really like these little auto-fire devices, but for $1 each I'm willing to try them. Is this for real? I did notice one of the little Smok devices like this has had lots of issues with the auto-fire getting stuck on. Is that why these are on sale? Or is this part of the regs coming... no more auto-fire allowed (actually that's not a bad idea, but I'm still willing to take my chances) I have no backup, and the one I had I dropped while at my son's house. I need something temporary so I can keep my main device at home. I like the Moji... use my own juices (what VG/PG ratio is best? I can Mix my own DIY)  

Device For 100% Vg

Can anyone recommend a good starter device that will work well with high VG juice?
I am looking for something relatively small that is easy to use. I am not interested in blowing big clouds or anything like that. Just a simple device to get started.
From what I have read pod systems will not work well for this and there are so many device options I am not sure where to start. Any help with this would be great.
Thanks  

Review Of Joyetech Evio C Pod For The First Week Use

I have got this device occationally from the giveaway hold by Joyech and have used the device for one week. It's really great for me as a new vaper. The EN coil lasts a whole week and now it still tastes great, maybe the AST-STEEL inside works. What I appreciate the best is the device does NOT leak like other vape pods. Just a good suggestion for new vapers like me .  

Smok Xpro M65 Problems

I've got a couple of these little mods and both have the same problem. They continue to fire after the button is released. When it happens the display changes to the power on/off and keeps firing until the unit restarts (presumably after the 15 second cut off?). I can only think that the mod is registering 3 presses when I fire which triggers the screen change, and there is a bug which stops the release of the fire button registering. Anyone experienced this? Any fix? I'm surprised it's happening with two units so it must be happening to someone else!