Coils For Cloud Beast?

I’m a mouth to lung vapor and currently using the holic rda and galaxies rdta. I’ve tried using ni80 round wire and superfine mtl fused Clapton ni80 wire. The round wire is so easy to work with and the superfine is harder but I’m getting the hang of it. My question is with coils that ohm out the same with each wire I get flat flavor with the round wire and the flavor definitely pops with the fused Clapton wire. Is this normal? Same juice, same wattage, same ohms and same rda and squonk.
I love working with the round wire but not worth it if I can’t get better flavor.  

I'm not new to RDA's, but it's been a while and new to all these different coils. I dont know to read the specs.
Juggernaut (32g/26g): from what i understand it's two claptons wrapped with a ribbon wire. How do I read this?
How do I read the specs for other such as: Alian, interlock Alian, staggered fused Clapton, parallel clapton.?  

I just given druga rda v1 authentic.i tried to build it used clapton,fused clapton,alien,and simple wire with 2.5 & 3 mm id.but i got no flavor.my drop clone can beat it easyly.its frustating me.somebody please help me.what is the best build for my druga?  

I'm new to RDA's, I have a Cloud werks RDA. I'm using a GeekVape aegis solo, I put in 1 0.45 ohm Alien Clapton 32gauge A1 coil, not sure if I can put 2 coils in. Anyway I have tried 50W to 100W and get very very little vape out and absolutely massive spitback (burned the F out of my tongue). Can I install 2 coils in this tiny RDA? I need help something is really F'ed up.  

I have a dna75 single 18650 that I take out with me.
I just ordered a bunch of small'ish MTL clones to use with it (Spica, Prime, V5, Millie, Gate).

I also have a DNA250C triple 18650 that I use at home.

I never used TC and don't really want to learn it nor power curves but might have to learn that later if I feel the need to. I already prefer and am grateful for escribe customization so maybe TC and curves won't be a PITA to add.

I couldn't get DNA250C's idiot-proof Replay Mode to work the one time I tried it with a dual SS fused clapton (others have had this problem, maybe it was the tank I was using).

For DNA250C bigger builds, I just ordered an Aromamizer V2 Plus RTA. And a Fatality 25mm. Fatality I might also use on the DNA75 with a smaller coil so battery easily lasts a day.


I'm guessing for the smaller MTL tanks to get round 316L if I do TC, and for wattage mode some Kanthal. I'm OK with even buying a DNA75C for Replay mode if the MOD is small sized though.

I really don't like ramp up time even with smaller coils, so maybe I should just learn TC and get 316L wire? For the DNA250C builds, ramp up would be long but I'm hoping Replay Mode will easily solve that.

Not sure which gauges.

And/or maybe for the MTL smaller builds get some thin clapton or something besides round? I don't want to kill the battery fast though but am OK with smaller puffs.


I already have some all-SS 316L Geek Vape Fused Clapton 26ga * 2 + 30ga, so that should be good for the bigger builds and Replay.



Thank you  

I'm a little late to the drop-in PNP coil game, I just got Wotofo's SMRT PNP rebuildable coil system and I LOVE IT. I've always been an oldschool rebuildable, low ohm, high watts, big hot vapor fan, and extremely skeptical of the replaceable pods because, let's be honest 5 years ago they didn't hold a candle to a plain'ol RDA that you have to spend 15 minutes building and getting just right.

Well the PNP coils have me kicking myself for not trying them sooner as they produce 95% the same amount of vapor of a *perfect* RDA build, but with 10x better warmth and flavor.

So I'm wondering why the heck other companies besides wotofo aren't upping the anty and making better PNP coils like Wotofo (the Voopoo ones are great, but Wotofo really outshines them with their rebuildable mesh-style pods). I would easily pay $20 for an Ohm Science pre-made Alien Clapton pnp pod or something a little more intense. Since you can put these PNP'S on an 80+ watt mod, there's a world of possibility for plug-n-play cloud chasing if you want, and I think there's some financial incentive for that.

Does anybody know where you can maybe buy some blank wholesale pnp shells because I might try and make my own if no one else does!  

Hi, I just got the 8 in 1 pirate coil kit with 8 different sets of coils, I'm trying in a nonmechanical mod with the DejaVu RDA with a dual 0.45 Fused Clapton Coils, and I need help calculating at which wattage should I vape for Maximum Flavor.

Thanks for the help  

I'm very curious about what certain terms and numbers mean and how they came to be.
Here's a few that come to mind:
RY4
18650 battery (18 x 65mm?)
510 thread
510 (and 810) drip tip (both the number and the term)
Atomizer (it's not like it actually reduces liquids to atoms)
Delrin
ceramic coil (the heating element, wick or both)
Squonk
OLED screen
Tootle puffer
Steeping (like making tea?)
Velocity deck
Fused clapton, alien, ect.
Resistance wire (what makes it different than other wire?)
PEEK insulator
Terpenes
Coil break-in (not how to, but what does it actually do)
Feel free to answer and/or ask more questions.  

First off, I would like to say that I’m very new to vaping. I started off with a JUUL, then a Smok Novo 2, and eventually got sick of buying pods.

Now I have a Hellvape MD, and an Ares 2 - the first provides better flavor, but it’s still not comparable to what I was getting in my pod systems. I just recently purchased a BP Mods Pioneer, and I’m hoping that gives me better results. I’m using an Aegis Mini for a mod.

I’m trying to figure out what I’m doing wrong, because it’s really frustrating to spend all this money for worse flavor, when I was hoping it would let me save money.

I have about 40 bottles of salt nic flavors that are 50 or 35 mg, and a couple 3mg freebase I bought (120ml for $7 seemed like a steal). I would really like to get away from the salt nic, but I seem to get even worse flavor from the 3mg.

I’m using 2.5ID 28ga SS316L round wire from Master Wire Supply (I have a spool) with Puffs Organic Cotton. My coils are usually .7ohms, but I’ve tried up to 1ohm. I’ve also tried 1 ohm Vandy Vape Superfine MTL fused claptons, and experienced similar results.

I’m using the MD with the most restrictive airflow settings (3 small hole airflow disk), low (2-3) adjustable AFC setting. I have my coil as low as possible to the airflow, and I have thinned / fluffed my wicks.

I haven’t tried adjusting the airflow below the coil on the Ares 2, because the video instructions say wide open airflow below the coil is the best for flavor (I have found the opposite to be true for the MD).

Can someone provide me more insight?

Will 2mm ID coils with the same amount of wraps taste better than 2.5? Do coil ohms do anything for flavor, or does it only change how fast it heats up? Will I lose flavor if my coils hang outside the diameter of the airflow disk?
Is there a certain type of coil that would give me better flavor than regular round wire?

I use TC at 420F 20 watts


Any kind of feedback is appreciated and if I left anything out or you have questions about my set up that could help me out please ask! I’m at a loss on what to do, and it seems like no amount of research is helping  

I have a TM 24 pro. I threw In a pair of Juggernauts just for astetic reasones.
I also have the geekvape mesh pro atty. With some, (most) juices I get a better flavor from from the mesh pro. With the TM24 pro and the Juggernauts I obviously get significant more vape. But my tank atty gives me more flavor. I fear pushing the 24 pro with the Juggernauts past 120-130w just because of the batteries i current have. Is it just the Juggernauts giving me the lower flavor or what? I have other coils, the alian, interlock alian, and the staggered fused Clapton. Is it the coil, our just the cloud chucking RDA o have.