Eleaf Ijust 21700 With Ello Dura Pmma

Hey everyone! I recently bought an Eleaf Ijust 21700. I did my research on it to see of it was up my alley before I did. I love it! I know it is a regulated device, and has a max of 80 watts. But I'm curious as to how it works. Specifically, how it reads coil resistances and adjusts the power output accodingly. If anyone can enlighten me on this particular query I would greatly appreciate it. Thank you!  

Hi.

I need some new batteries for my Aspire Tigon Tank. It has to be much like the Tigon battery.

Not big batteries and not small, cause i don't like heavey batteries, and it should give lots of vapour. It should be the cylinder shaped batteries.

Whats the watts on the Tigon? Is it 40? It should be the same.

And else should you notice? Do you also need to notice volt? Is does'nt need to be 1800 mah, but it should be high. Maybe least 1300.

And of course 510 connection.

Please name som models, that fit my description.

What about: Vision Spinner 2, Innokin Endura T18, Joyetech Ecxeed D19, Kangertech EVOD VV?  

Hi

I'm using Samsung 21700 T40 batteries.
Trying to figure out..
Is it best to charge a battery when it's discharged or nearly discharged?

I like to keep things simple with a routine of charging once a day, but then the battery will be set to charge even when there's 15-30% power left.

Is that bad for the battery?  

Hi all

I started vaping again after many years like a month ago. My set up atm is Aegis Solo (came with cerberus tank which leaked madly), currently using Aspire Tigon tank and I have an Innokin Zenith Pro which I haven't try yet.

Is taking me a while to figure out what kind of vaper I am, still not 100% sure tho, I know I prefer DL over MTL but not at high wattages because I believe the vapour becomes to warm for me. I like the Tigon tank but is a little to restricted for my liking, I will like more airflow.

Questions:

1 - Is DL at higher wattage always a warm/hot vapour?
2 - What suggestion for a more loose DL tank with vapour not to warm.
3 - Worst case scenario if the cerberus won't stop leaking (I do like the options of several coil compatibility) would the Zeus top airflow be a good option or others?

Any help will be greatly appreciated.  

I have an Eleaf iStick 30 & use the Aspire Nautilus mini with it. I bought a Melo tank to try sub ohm vaping, but don't like it (Melo coil) at .5 ohm. I do, however, really like it when I slightly unscrew it & get a 1.2 ohm reading for it.

I'd like to try the new Atlantis V2 1.0 ohm for my Melo tank. Why does Aspire list the power requirements for the 1.0 ohm coil at 40-50 w? I'm assuming they mixed up the specs for the .5 ohm and 1.0 ohm. Is this correct?  

For some reason really got the itch to just get something simple so ordered an RPM80 with the built in battery version.  

So, I recently purchased the Gaur-21 with the Valyrian II Pro, and the mod is 21700 and 18650 compatible. I was curious as to the benefits of the 21700 batteries, because I’ve only used 18650s.  

Hey everyone, so I already have the eleaf istick but I'm just using a basic useless clearomizer on it. Is the Aspire Atlantis compatible with this battery? The iStick is 510 threaded, so if anyone can tell me if the Atlantis is 510 threaded, that'd be great. If not, is there some sort of adapter I can purchase? Thanks!  

So hi guys I been vaping since April loven it so I'm looking get something different i got the ego c twist with aspire bdc clearomizer. What should I get next I was looking to get the vision spinner 2 and istick eleaf 30w or should i just get the istick eleaf 30w or 50w. I wanted to get the vision spinner 2 from fasttech with couple of other things but I'm going to get both.  

I figured this would be the Second best place to put this question but the other forum doesn't produce any replies. So I posted it here. Simple answer if you know what to use to glue glass to metal and will be non toxic!

On to the question, I have a first generation Kanger Protank where the body, glass bit, is glued to the bottom metal piece that screws into the Skirted piece of an eGo battery adaptor. One friend was using the glass piece to screw the Protank onto and off of her mod and to refill the ejuice. Short story shorter she popped the glass piece of the first gen Protank.

Big question part, what type of adhesive should I use to "GLUE" the Glass to the bottom metal Piece. Something that is non toxic and will survive the repeated stresses of day to day use that a Protank would encounter?

Thank you for your understanding, Moderator's, the Cross Post.