Currently I have a drag 2 with Wotofo unity rta
I was using geek vape mesh coils
and never had a bleeding nose I think there’s more vapor coming out of the rta
when I chain vape it’s usually when I am drinking(beer)
Is this normal issue i been doing good on cutting down on analogs I don’t want to go back to analogs
My husband was doing great giving up the analogs. Six weeks later (four cig. free), he's complaining about his nose drying out so much it bleeds and is scabbed over inside and his throat hurts/dry/rasp. Anybody else experience these symptoms? Is it too high nicotine, not enough water, the PG is messing with him, gunk is getting cleaned out of his system? I'm just not sure what to do for him, but he's threatening to go back to analogs because of how he's feeling. He's using Aspire ego batteries with clearomizers, 50/50 ejuice with 12/18mg. He really likes vaping, and I hate for him to go back to those stupid cigarettes.
I’m a long time vaper. I have been vaping 83/27 PG/VG juice with 12-16 mg nic. I use an avacado tank with dual Clapton coils at .3 ohms and around 50-60 watts. With this config I can get my most desirable lung hit but only with certain juices and I tend to chain vape. Whenever the shop is out of my regular juice I’m always Leary picking something new because a lot of times even at the same nic level I don’t get the satisfying lung hit I crave and end up with a sore throat from hitting it so often. Soo... I moved to Hawaii and my system is all screwed up. The juices here are all 50/50 so super watery, the juice is also double the price, I burn through it twice as fast, the lung hit is barely there, and it pops and crackles really loud which drives my wife nuts and has cuased many arguments about my “stupid crack pipe”. So in an effort to make my wife happier, spend less money, and maybe vape less I decided to venture into the salts realm.
I started with a geek bar to test the waters and lung hit was phenomenal! But at $20 a pop and only lasting a day that just wasn’t going to work. So after much research I just picked up a SMOK NORD 2 and some 48mg juice. I set it for 50 watts and took my first drag. Good god almighty! One hit and I caught a buzz. I have NEVER caught a buzz from a vape before. After some messing around I dialed it down to 25 watts and so far seems like the sweet spot and I don’t have the urge to chain vape... so success? I don’t know yet? It’s for sure a lot quieter and 1/4 the size of my tank MOD. Does going from chain vaping 16mg to 48 salt nic seem excessive or about right? I may try the 24mg juice when this one is out but any other suggestions? I’m a little worried I’m going to give myself nic poisoning after that first drag lol
Last week on a road trip with my motorcycle club, I had to go back to the “ash tray”. It’s to dangerous on the road, on “two wheels” with these constant sneezing attacks. I bummed cigarettes, then bought cigarettes. There’s thousands of road miles planned this summer, I’m leaving again next weekend. I love to ride, hate cigarettes, the taste, smell and cost but vaping will surely kill me!
There isn’t much of anything here or on the WWW about my issue with sneezing attacks. Not just a little sneeze but 4, 5 6 or more with an irritable urge, watery eyes and nose. When I put down my vape for an hour, it goes away, when I hit it, it starts back. Allergy medicine doesn’t stop it and makes me drowsy. This just started about 3 weeks ago, it’s like I’m suddenly allergic to...?
I’ve been vaping since 2013 when my lovely 77 yr old Aunt shared her vape. I had tried everything on the market including prescription drugs and hypnosis to put down my 20 year pack a day stink habit. For 5+ years I’ve been using an RTA and DIY juice. I’ve been using the same DIY products from Nicotine River (fresh frozen) since Dec 2019 as well as same flavors, TFA, LorAnn, Capella and same recipes. using a VG 70/30 @ 8+ Nic.
For 4+ years with zero issues I used the Lemo 2. Yes an oldie, but ya no how it is when you find a good combination. Until last year, I could get all the rebuildable supplies at Fastech. Since 2020 I’ve been buying and using different RTA’s, RDA’s Squonks, mesh coils, etc. searching for a “new love”.
My tanks are Profile Unity, Zeus Dual RTA, Creed RTA, Drop, Brunhilde and Dead Rabbit. JIC it was the new packaged supplied wicks & coils, I went back to my old wicking material which didn’t help. Tried 100% VG with VG Nic Salts, no change. I’m at a dead end, totally out of ideas, I give up, still hate cigarettes but...
Any thoughts would be much appreciated!
do you vape at regularly consistent intervals or do you chain vape all day?
If you chain vape do you vape a lower nic level so that you don't get nic sick?
I find myself using my itaste more than i would smoke so i am wondering if that is normal or not.
Hey all. Merry Christmas!!
I’ve been doing some research lately trying to get back into the real vape game (and out of the Juul games smh).
Looking for some compact devices both mods and attys. So this is my list I’m considering buying:
(Attached is the link w prices)
OBS Cube 80w starter kit
Voopoo Drag Mini 117w
Freemax Twister 80w starter kit w/
Vandy Vape Kylin M 24mm Mesh RTA
Hey Guys,
I have been wanting to use a mech mod for quite some time now. But I didn’t want to rush into things, given that they can be dangerous if not used properly.
To prepare I have studied ohm’s law and have a pretty decent grasp on it. And have a calculator app on my phone.
I have checked out Mooch’s battery recommendations and have a good idea of what batteries to use and which to avoid.
I still do have a few questions I was hoping an experienced Mech user could help me answer:
- What would be the “sweet spot” as far as resistance and safety go for a dual coil set up? Obviously I want to go as low as possible and have a hard hitting vape. But I also want to be safe. I plan to use a dual 18650 Parallel mod (The Clutch X18). I would be most likely be using Sony Murata batteries as I cant find any Samsungs where i live. I’m thinking somewhere around 0.17-0.2? Or would it be safe to go lower than that? I will of course test my build on an ohm reader and regulated mod before throwing it on the mech to be safe.
- Are there any other general safety tips? Ive heard that you want to screw the Atty down all the way first, before inserting the batteries. And then insert the batteries. And when removing the batteries i heard you want to slightly unscrew the atty first, and then carefully remove the batteries? Can anyone please confirm if this is correct.
- Is its safe to chain vape on a dual 18650 parallel mod? When I say chain vape I mean like maybe taking 5-6 big hits back to back. Then waiting 3-5 minutes, dripping some juice and then doing another 5-6 hits.
- Is there anything I should be monitoring while I’m vaping? Like the heat of the batteries? From what I’ve read, the batteries drain quite fast on a mech. And after some experience you will just kind of know when they need charging because the vape experience changes. Is there anything I’m missing? Or something i should be looking out for?
- I can only vape in my kitchen. And sometimes there might be a little bit of water on the counter from someone’s drink sweating, or drops after someone washed their hands etc. Is this a risk? I will of course do my best to keep all surfaces dry. I’m not talking about large amounts of water or submerging or getting the mod really wet. But just what one might find on a kitchen counter.
- Any other tips you could throw my way would be great!
Thanks in advance!
So I've been mouth to lung vaping since I started vaping. Started at 24 mg with the Halo Triton and when I upgraded to the iStick and the Nautilus I lowered my nicotine down to 15 mg. It's been fine.......getting enough nicotine so I don't crave analogs, not getting too much nicotine so that I start feeling sick. Throat hit has been fine and not uncomfortable.
Yesterday I started doing lung hits with the iStick and the Nautilus and with the greater amount of vapor I can produce, I stepped the nicotine down to 12 mg since I also started to get a little lightheaded (I suppose with the greater amount of vapor I am also taking in more nicotine, even though nicotine absorption through the lungs is not supposed to be as good as through the mouth and nose). The juice that I am using is also a 70VG/30PG mix as compared to the 50/50 I was vaping before. However this morning I woke up with an irritated throat and the vape (even when switching back to mouth to lung) feels more harsh.
Do I need to step down the nicotine level even more to 6 mg? Is this normal when going from mouth to lung to direct lung hits? I'm not subohming, so I didn't expect that I would need to drop it down that much. I'm afraid that if I drop it down too much, then I'm going to have more cravings and will need to vape constantly.
Hey Guys,
I have been learning the ropes of RDA vaping, and so far I absolutely love it! As the title states I’m wondering what coils (FC, Aliens, etc) Would be best for flavor and vapor output? I’m currently running some Wotofo 0.33 Fused Claptons (~0.17 in dual coil) @ 60 Watts. The flavor and vapor is ok, But I’m looking for a little more. Maybe something I could run at a slightly higher wattage and get more vapor / flavor?
Any help would be greatly appreciated!
Thanks!
Hello! All!
I hope that everyone is staying safe and healthy.
QUESTION? I have been buying Geek Vape products for a little over a year. For the past 10-12 weeks, I have been having a hard time in finding coils, tanks and Vaping devices. I went on 10 different websites and they are all out of stock. Does anyone know if there is a problem with Geek Vape or if the problem is for other companies or products coming to the USA.
Thanks,
Dale
74 days without a cigarette so I’m still new to this whole vaping thing.
Started with Juul, got tired of refilling pods very quickly.
Switched to a Smok Nord. Have grown tired of the hit/miss with cools.
Just got my Zenith tank. Went ahead and got the Kroma/Zenith kit and it’s my first non-pod setup.
Like it so far. Only issue so far is there seems to be a lot of juice coming through when I take a hit. When I take a drag but put a thin white piece of cloth over the tip there is a very noticeable amount of brown stain on the cloth. Had the same issue when I got my Smok Nord but I corrected by switching from 50/50 nic salts to a 70v/30p freebase.
Currently Using the same 70vg/30pg 6mg Halo Tribeca.
Using the 1.6ohm coil;
Started at 14 watts;
Dropped to 11 watts and it reduced the juice but also the temp of the vape.
Adjusting the airflow doesn’t really make a difference.
Anyone else having the same issue with the amount of juice coming into their mouth? Is this normal with this type of setup? Did I flood the coil or something? I primed it with 5 drops then let it sit for about 10-15 minutes before taking the first hit.
Will probably limit it use at the house because I don’t want to carry around so much weight in my pocket.