Njoy

I’ve had a couple njoy batteries that I’ve replaced when the times come. I just got a brand new one yesterday and it fell in water. I’ve put it in rice and it hits okay but once I hit it the light stays on afterwards for a long time. And the light is faint and flashing when it’s on the charger. Is there anything I can do to fix it?  

Okay, so I Vape in very “precise” ways but I cannot figure out how to calculate (do the proper math) on how much I nicotine I am consuming. Can someone help? I have been vaping the exact same way daily for a long time, but still don’t know how much nicotine I get (just an estimate) per session because I suck at math...

Details:
1.) I vape 3mg (3mg of nicotine, per ml of juice) of nicotine using a “Smok Nfix” that holds a 3ml pod of nicotine juice. So that’s 9mg of nicotine, per pod.

2.) I set the wattage to exactly 22W on the vape, always, and it is a MTL pod device.

3.) I take EXACTLY 5 puffs over a period of 5-10 mins. Every puff is EXACTLY 5 seconds. Sometimes only 4 seconds, but just say 5 to make it easier. I use my watch or phone’s timer to make certain the timing is exact. I inhale the same way every time. So 5 puffs X 5 seconds, per puff, equals 25 seconds total for each vape session. After those 5 puffs, I don’t vape again (at all) for 1-3 hours, just depending.

....But how do I figure out how much nicotine I am getting in those 5 puffs? I know that in my Nfix pod there is 9mg of nicotine, in each pod.

I also believe 1 full pod (3ML) gives approximately 325 seconds worth of puffs, with each puff being only 1 SECOND. I only tested this one time so I am not certain, but it’s an estimate.

Can anyone help me do the right math here?
I also still smoke ultra light Marlboro cigarettes (from what I read on multiple sources you only absorb about 0.5mg to 0.7mg of nicotine per cig on the ultra lights) but only 1-3 cigarettes per day.
But I am wondering if my 5 puffs on the vape (5 puffs @ 5 second each) is even remotely close to being equal to an ultra light cigarette that has about 0.5mg nicotine per cig?
Thanks, I suck at math so if anyone can help lol  

I have an orbit cannon vape pen. I believe it's 510 style.

I bought it 5 months ago. I just got around to using it. You press the button 5 times, and it turns on, press it 5 more times and it shuts off. The light also indicates the battery voltage. It turns white when fully charged, and then blue, and then red when it's almost dead. There is also a light on the charger that is red while it's charging and then it's supposed to turn green when it's done charging.

Well, the e cig battery light stays white for a short while, and then turns blue. It used to stay white longer. It's like after a short bit of usage, it goes blue. The red light on the charger also never turns green no matter how long it stays plugged in.

The e cig stayed in the box, and the battery was depleted. I picked it up a few days ago and put it on the charger to start using it and noticed this.

Does it sound like the battery is messed up? Last night I charged it 3 hours and the red light on the charger never turned green so I unplugged it. The light on the battery was white. Today I went to use it, and the light was blue - I never used it and the e cig itself was turned off.  

So I ran into a good guy I hadn’t seen for a long time who vapes DL. He’d recently busted his main vape and had picked up a SMOK as a quick emergency backup.

I suggested an ageis legend and a Doom atty to him, but he wants light weight, which is a specialty of neither of those devices. He can wrap and wick an RTA, has a lot of kanthal to use up, and wants a tank bigger than 3ml. The more the merrier I suspect. His batteries also suck.

So if it would please the participants, I’m looking for suggestions.

Mod:
- light weight. Small would be nice to
- reasonably high quality. He doesn’t need ruggedized necessarily but he wants it to last.
- Low cost (he’s willing to work with Chinese no-names and to shop China channel. He likes Ali-express)
- 2x18650, though I suspect a 1x2x700 would also suffice. He vapes DL so a certain amount of power is needed
- No Blinky Lights (this one is absolutely non negotiable)

Atty:
- DL
- Doesn’t leak (yeah I know. Anything will leak.)
- Capacity over 3ml

I’d personally like to add no paint or gold electroplating over pit metal. He didn’t ask but they suck bad.

Gonna mail him a link to this thread.

UPDATE:
Dude is an old ECF member and his account still works!
The person I was asking for is @rigorist

He will have more accurate data than me.  

I’m curious as to why you shouldn’t do DL when using nic salts. I’ve got an Aegis Hero with a 0.6 coil at 15 watts. Even with the airflow closed off, it’s still to loose for a MTL. I keep reading and hearing I shouldn’t use nic salts for DL. The worst thing I’ve experienced so far is a mild headache. The nic salt is a 30mg.
Thanks in advance. ECF is my only true support group and I’m having a really hard time not smoking the stinkiest. Been back to vaping for about a month, and keep telling myself it’s all about baby steps. Not how many I smoke but how many I don’t smoke. I’ve got to quit for health reasons.  

I bought a brand new freemax twister 80W kit and when i connect it to the charging port the blue ligt flashes then theres no light to show that it is charging, what may the problem be???  

Hey everyone! I took a substantial trip down cigarette lane and I want to find my way back home. I’ve not been keeping up to date with the new tech out there but I’m really wanting to get back off cigarettes. I’m going to be lurking around to try to relearn everything so I can get an up to date picture on which mod I should be getting. My biggest concern is falling off the wagon again, and having the same problems as before which made me leave. Mainly leaky tanks and bad atomizers. I’m hoping the quality control has gotten significantly better.

Anyway, I’m super excited to be back with you guys! Say hi if you see me around!  

Dam, I have not been on this site in a minute! Was sitting around thinking about the beginning of all of this and thought; I wonder if ECF is still around? It is and my log in still worked! Seriously, super excited to see this fantastic forum is still alive and kicking! I learned literally everything I know on here and am looking forward to getting back to some straight up vape talk! I have truly missed this site. Help me jump back in here, how is everyone? Who’s who today? I’m listed as a vet (and that’s true for sure) but I feel like my first day on here back in 09! I don’t know anyone now.  

I caMe home from work and seen my topside single was lit up on my dresser.I hadn’t used it in a couple days so I picked it up only to see that the wattage is going down non stop and won’t fire and it’s as if the wattage down button is stuck. It’s not though. I can’t find anything small enough to take the panel off so I pretty mad. Only
I’ve had Mabye 40 refills with this mod and never been dropped . Just use it on the weekends when I drive mainly that’s it . This is why I hate regulated mods. Anyone else have this problem? I don’t know why it doesn’t even come with a Alan key to
Take it apart.  

Hi Guys,

So I originally had a nitecore i8 charger that I used to charge 8 x 18650 batteries. After using it for a few days I started noticing that it made a weird ticking noise and got VERY hot on the bottom. Needless to say this made me quite uncomfortable.

So I exchanged it for a Xtar VC8. So far it’s been amazing. No ticking or weird noises and it doesn’t get hot. It also comes with a nice screen that shows you some details about your batteries. This is what leads me to my question.

I noticed when charging my batteries most of them show as roughly 3.7v but others show as 4.1v. Also the longer they charge the higher the number goes. Is this normal? Sorry I’m a total idiot when it comes to batteries and voltages etc. If anyone could clue me in i would be very great full!

Thanks