Okay so I did look this up and it appears that other people have mentioned this specifically with sigelei mods but I didn't see any that were more recent. I look at my mod to see what my batteries charge looks like to see if I need to go ahead and change batteries and I swear to God the thing starts jumping around as though the batteries are charging themselves and then going back to the 40%. Apparently that's a problem that the mods have and isn't something to be concerned about but it freaked me the heck out. They're doing just fine now that they're in their external charger thingy but I just want to make sure that that's not a sign of something going wrong with the batteries that it's just my mod being weird I've checked the connections and everything to make sure it was clean and that the batteries were fine and not dented or unwrapped and everything looks good. I just need some assurance that the batteries were not like failing or that a regulated mod would shut itself off if batteries were jumping around like crazy in reality if that's even possible
For clarification it was doing this when I was not firing it
I bought my Sigelei 100w Plus a few days back and ordered 2 Sony VTC4's on my same order (I'm confident they're legitimate, I've bought some before) to be able to marry them together and use them with my Sigelei. Upon receiving the batteries, I labelled one A, and one B and put them into my charger at the same time (charger was off, put both in and turned it on), one battery is slightly more charged than the other (it's 2/3 bars, while the other is still 1/3). I'm a bit worried about using married batteries, I understand rotating A and B in my Sigelei and charger but will they be the same charge when they're done? They're new batteries and they both went on at the same time yet one of them is charging a little bit faster.
When both of the batteries are fully charged, will they be safe to use and cycle accordingly? I heard about if one battery has even a tiny bit less, the batteries will take an uneven load and it will make it risky. How do I ensure that these batteries remain married?
Hi I just got a sigelei 100 watt plus and this is my first time using freshly charged batteries in it... it's still reading at being 100% in the sigelei. ive been using it for maybe 3 hours total . Is this normal .. because its starting to make me wonder if something is wrong. Its been at 40 to 50 watts this whole time. I didnt charge the batteries at first when i got them because my charger did not arrive yet...then once it did come i charged them and now its continuing to stay at 100%
I wanna buy the sigelei oni edition 150watt but iv not used any box mods that require batteries yet, my jellyfish and innovkin has internal batteries, can you gents recommend 2 good batts and charger. and is there any tips i might need to know.
I ordered two of these batteries from FastTech. The cheap price and high capacity (without having a mod or some awkward huge battery) attracted me to them. Some two weeks later they show up...
I have two Puff King chargers that came with starter kits we bought at a B&M store. We've been using them with Tripl3 eGo batteries, one Puff King battery (and another Puff King battery, which was taken back and exchanged for another eGo-T battery, which broke), and so far no problems screwing any batteries in. These two from FT show up however and neither will screw into one Puff King charger, but they both did into the other (same charger, down to the model number and everything). Now, one battery from FT still screws in, but the other doesn't.
I took the non screwing in battery to a local B&M store and the guy there was able to screw it into one of their chargers. He handed it to me, and I unscrewed it, screwed it back in, unscrewed it again, and then neither of us could screw it in again. Now I have one battery from FT that will screw into one of my chargers, but not the other. The other battery will charge, but it has to just like sit in the charger and hope the connection stays okay for it to charge. I still have no problems screwing any of my other batteries into either charger, just these ones from FT. Also, it's worth mentioning that the FT batteries never seemed to screw in right... it always felt weird and finicky getting it to go in.
What's up with these batteries? They claim to be eGo/510 threaded, just like my other batteries. They look just like my other batteries too, except they won't screw in right...
anyone know of one that exists? I want a box mod that can go up to 100-150 watts but want one that has internal batteries that I can charge via usb cable or ac adapter
I was looking at the segelei and ipv3/4 but I don't want to change batteries
the reason is I travel sometimes for my job up to 2-3 hours and I don't want the hassle or danger of changing batteries while driving
I want something I can vape on for a couple hours without worrying about replacing the batteries
I sub ohm at .2 ohms and bought the arctic tank .2 ohm coils specifically for this reason
thank you
p.s. I found this: MEGATRON 260 watts 5400mAh box mod uses ac adapter to charge but looks really weird and no one has tried it yet so I'm a tad skeptical
Hi Guys,
So I originally had a nitecore i8 charger that I used to charge 8 x 18650 batteries. After using it for a few days I started noticing that it made a weird ticking noise and got VERY hot on the bottom. Needless to say this made me quite uncomfortable.
So I exchanged it for a Xtar VC8. So far it’s been amazing. No ticking or weird noises and it doesn’t get hot. It also comes with a nice screen that shows you some details about your batteries. This is what leads me to my question.
I noticed when charging my batteries most of them show as roughly 3.7v but others show as 4.1v. Also the longer they charge the higher the number goes. Is this normal? Sorry I’m a total idiot when it comes to batteries and voltages etc. If anyone could clue me in i would be very great full!
Thanks
Hi folks,
I recently purchases a Sigelei 100w box, and got the purple Efest batteries that the vendor recommended.
I'm using this with a KangerTech Subtank Mini.
It's currently set to 42W - 5.0V, and the resistance it shows me is 0.6 ohms.
I have some questions about my setup.
- I read some reports that these batteries have different specs than what is reported, and it could potentially be dangerous. What should I do to be safe? Is there a max W/V that I can set it to?
- I have a TrustFire TR-001 charger (output: 4.2V / 500Ma). Can I charge those batteries with that? I read the charger supports 18650 batteries, but I'd rather be sure...
- If the charger is no good, any recommendations of what I should be using?
Thanks a lot!
Hello
Haven't been here in quite a long time but I have a question.
I have had a good supply for batteries for about a year now and have bought batteries from the same place... rtdvapor since I started vaping.
Batteries are getting old, looking to get new.. but when I go to rtd it says it is unavailable.
So I guess I have 2 questions.
Anyone know if rtd vapor is still in business? and if not anyone know a reliable place I can go for batteries?
Thank you all in advance!
Hi guys,
I would like to try more models of batteries, 18350 - 18500 - 18650.
Beyond AW, that I use usually, what other batteries can I try?
I use only mechanical mods, resistances from 0.8 to 1.5 ohm.
Thanks for the help!
Now that I have gotten into unregulated mods I've been doing a lot of reading about batteries... well actually I had started reading before but now that I am actually using them I want to know more.
One thing I am a little puzzled about is that you should recharge a battery when it's about 2/3 discharged and you should never charge a battery that is completely discharged. My questions:
1. How do I know the level of discharge in my battery? - I don't own a multi meter
2. What do you do with a fully discharged battery? - just chuck it?