Using A Silicone Sealer

So I recently purchased a Pulse X 90w. And I've noticed that the squonk bottle is leaking inside the mod itself. And sometimes juice gets pretty close to the positive battery contact. Does anyone know what may be causing this? Whenever I fill the bottle I always fill it up to about 3/4 so that there is displacement for the tube itself. I get it all screwed down and back in then after a while, or my next fill I notice that it's leaked again. This is becoming a rather annoying problem. And I'd rather not chuck a mod that I just bought because of a stupid issue such as this. Any suggestions would be greatly appreciated. Thank you!  

Hi,

I just bought a litre of 100mg/ml unflavoured PG E juice.

I calculated that if it doesn't go off it should last me 10 years. It came in a sealed plastic bottle.

I bought a dark amber glass bottle (which I have sterilized) to put it in but I was wondering if it would be better to leave it in the original sealed plastic bottle rather than breaking the seal to put it in the glass bottle? I took the lid off and it has a proper seal over the rim of the bottle like a Gatorade.

Also the glass bottle I bought came with a plastic lid but I doubt it will be 100% airtight.

Thanks for your advice, any other tips would be much appreciated.  

Recently bought some white silicone sleeves for a mod because all that was left to by anywhere. Not a big fan of white pr translucent silicone sleeves because when they get stained it's impossible to clean them, not even bleach works.

I figured I could try dying them.

Anyone do this successfully before?

I've read about it on a few sites. One method is to use hair dye, but I figured I would ask here in case maybe someone has done it using a better method.

I also have a bottle of black RIT fabric dye, but I don't know if that would work well.

Just don't want it to rub off on my hands or clothes.  

I have hellvape me RTA and I had some flooding problems and I checked the top fill seal I love the topfill and check it with my mouth and I see that it's not sealing perfectly.... The rubber seal seems to not make perfect contact and I wonder could this cause flooding problems when I leave my vape without using it??? It draw air into the juice chamber??? Also someone here on a thread mention he had 2 hellvapes and when he swap the topfill parts with each other his vape don't leak....should we have perfect seal at the top fill mechanism???  

So I got some great super clearance deals on some dual coil RTAs but I'm a single coil kinda vaper.

My thought was that surely I could buy some little blocks of food grade silicone to whittle down so I could make plugs to plug up the juice ports, air ports and take up air space on the side of the RTA chamber I won't be coiling and wicking. To do this I would need extruded blocks or sticks of silicone about 2 inches thick.

I thought this would be easy to find, but I'm at a loss. I tried ebay then google but no one sells little blocks or sticks of extruded silicone.

But maybe I'm using the wrong keywords?

Anyone know where I can find something like this?

EDITED TO ADD: I am open to other ideas. I'm not set on the idea of using silicone. It's the only thing I can think of that would work well enough to seal up air and juice ports as well as to block the air space in the chamber where the second coil will not be installed. But I am keeping an open mind.  

Did you guys know that you are supposed to be shaking your bottle of e-liquid? I just read that on my bottle of Loaded Strawberry Jelly Donut.

I have never been doing things and well. I am going to start doing it to see if the flavor gets any better.  

So today I decided to go check out a B&M that is near me, but further away from the other B&M's closer to me. The place is called The Vapor Lounge and it is located in Warwick NY. If anyone ever finds themselves in the Hudson Valley, I highly recommend checking this place out. Went there to check out some different brands and flavors of juice, ended up leaving there with some new juice, a new mod, and a new RDA (and my first one at that).

The Vapor Lounge Warwick NY

Spent quite a bit of time talking with the owner, Zack, sharing stories on how and why we got into vaping. All his prices either matches, or is slightly better than prices you can find online. Ended up buying a SX Mini M Class ($200), Freakshow Mini ($25), a couple of JMK WD Pico+ drip tips ($20 each), and a couple of other delrin drip tips with a stainless steel cover ($5 each and shown in the picture). I also picked up two bottle of Voltage by the Juice Guys in 3 mg and a bottle of Dragonaire by Tasty Cloud in 6 mg.



Zack recommended the Freakshow Mini as a good starter RDA that gives great flavor. He spent over a half hour walking me through and showing me how to build a nickel coil for it and wicking it with cotton as he built me a coil for the Freakshow Mini, and he didn't charge me for the coil building. He then walked me through all of the options in the menu of the SX Mini. They do have a rewards program where you earn $1 for every $10 you spend on hardware, so I've accumulated enough points on this one purchase for a bottle of juice. As I left, he said to come back whenever I have any questions or issues, even if it is with stuff that I did not purchase from him.

He has definitely earned a lifetime customer.  

Just curious how you guys go about vaping through your juice bottles. I buy 30 ml bottles usually. I have a few tanks and dedicate a specific bottle to each tank. I make myself finish off a bottle before I go onto my next juices. If I decide to put a half bottle away and try a new flavor, I'd have a bunch of half bottles laying around and it would annoy the hell out of me.
I have a couple 60 mils on the way though, so I suppose I wouldn't mind stashing those halfway through. I suppose it could be way different for people that drip though.  

Hi all,
I've been using a t22 vape mod for a while now and I'm happy with how it has been going. Just a moment ago however, I went to fill my bottle of water and without thinking thinking I may have had a little bit of liquid on my fingers and palm of my hand and then used my vape, I realised quickly after using the vape though that I could be in a bit of a situation with the mod. Is there any chance of something happening? I've fired the vape and it seems to be working.  

“I’ll NOT be doing THAT again!” - the famous Taurus War Cry was heard in our house this morning!

As happens to the aged, O500 hrs this morning found me suddenly wide awake for no good reason. As usual when this happens I got up, sat in my recliner office chair, drank a pot of tea, read for a bit, and visited forums until the rest of the world came awake accompanying all that with a vape.

However that vaping ( OK chain vaping for 2-3 hours ) was done with my new Feedlink Squonk, inadvertently loaded with 18 strength liquid, fired at 4.2 volts to begin with, through a 0.6 ohm coil.

Not good. Not good at all.

Having smoked since I was very young, inhaled even pipe tobacco etc I never reckoned I could get nic sic at this late stage … but OMG suddenly I got hit with the full repertoire, the sweats, the feeling of nausea, dizziness the restlessness where I couldn’t settle but had to prowl, the racing heart etc etc.

How did I manage to do it? Carelessness coupled with the old “it’ll never happen to me” routine basically.

I had grabbed a bottle of my old 18 strength Menthol Liquid, filled the squonk bottle without looking at the juice bottle’s label and chain vaped using what is in essence a protected mech mod with a new battery on a sub ohm coil.

I’m normally a tootle puffer with 1,6 ohm coils but OMG initially at least with the squonk I enjoyed trying DTL and blowing clouds … initially!

I’m sure the rest of you reading this will have more sense than to do anything like I did this morning, but trust me - I’ll NOT be doing THAT again!