Pls Help

I have an alien 220W. The mod is in vw mode and when I'm going to fire the voltage is set to for eg. 4 volts, but it only pushes 2 volts...
Please help.  

Hello,
It's been a few years since I joined the vape community. For the whole time I bought only new vapes, as older ones were left behind. Getting rid of my old vapes and buying new ones.

But recently it all changed, since I decided I'll try restoring old vapes!
That's the thing, people scratch them, maintain poorly them, but they're still usable. Their prices drop dramatically with their looks. But they still work fine!

So I decided on restoring scratched, beat up vapes and giving them a whole new look!



So this is a greatly aged, one of the first versions of Smok Alien 220W from 2016! It originates from the UK, coming all the way to Baltic states. It looks all beat up, got it for a really good price!



Did a paint job on the line metal, brushing the buttons as well as sanding down the metal. Wanted to do a Storm Trooper replica, but the paint started sagging, and overall, was an awful paint.



Next one is a Joyetech eVic Mini, don't have a lot of pictures of it, but overall was a scratched, bruised vape. So I sanded it down, painted it and gave it a new look!



The third one in progress is another Smok Alien 220W



Hopefully will turn out just as imagined! Stay tuned!  

Hi,

My Nunchaku (1) have auto-discharging problem. In 4-5 days the battery is down, without use. Have you notice that or it's a specific problem of my mod ?
ps. the mod is new and I'v testing with two different battery
Thanks

pascal  

Does anyone have any experience with https://www.darthvaper13.com/ and their products? I was looking at some of their mods, and I really like them, but I'm not sure how well they are built. I don't know too much about mosfet. Only the basics. All my mechs are straight mechanical buttons. I don't want to buy a mod and the quality isn't too well. ie. Warm chips, buttons, batteries discharging unevenly.

I was not able to find a lot of information on them online.  

Hi, a few weeks ago i just switched from a old Luxe to the new Vaporesso Luxe II 220w kit and in like two weeks i managed to melt 3x GT coils(GT, GT2 and GT4) then i switched to my old atomizer from the previous mod and so far, besides not having a good flavour or flow it at least works.
Any tips on what the problem may be?  

hi, i have been vaping with same setting for 2 years :
Regulated mod, Single coil rda, 2.5 mm alien coil 0.25 ohm, 30-35 watt, 18560 sony batteries.
I have been using the same batteries over and over for 2 years.
And I consider my self an expert when its come to my setting i mean I really know when its wicking issue or burnt coil or wrong coil position, 510 contact, battery contact etc ....
The thing now is that i feel some thing wrong with my vape, i dont feel it hit hard as it was before, it do spitback the ejuice to my mouth, flavor is little bit down.
So what i am asking is :
- could it be the batteries since I abused them?
- Is it possible that my mod show 30watt in the screen and doesn’t manage to deliver that 30 watt to the coil?
- I know as fact that long time used batteries have less capacity so they will charge and discharge fast, but i wonder if they also will be weak and don't hit hard enough in compared with its original states ?  

Got no idea what this thing falls into...

The MechLyfe Ratel 80W (8.5V). It uses an external 18650 battery and it uses an RTA build deck. I’m not sure if you can use pre-made coils for it though. You can use it in both DTL and MTL but with MTL it’s loose draw. You can’t adjust the airflow on the fly, you have to take the panels off to make the airflow adjustments.

The build deck looks nice and simple to build on. You might get away with fitting in an alien coil.
 

Hi folks,

I recently purchases a Sigelei 100w box, and got the purple Efest batteries that the vendor recommended.
I'm using this with a KangerTech Subtank Mini.
It's currently set to 42W - 5.0V, and the resistance it shows me is 0.6 ohms.

I have some questions about my setup.

- I read some reports that these batteries have different specs than what is reported, and it could potentially be dangerous. What should I do to be safe? Is there a max W/V that I can set it to?
- I have a TrustFire TR-001 charger (output: 4.2V / 500Ma). Can I charge those batteries with that? I read the charger supports 18650 batteries, but I'd rather be sure...
- If the charger is no good, any recommendations of what I should be using?

Thanks a lot!  

Just bought a brand new pair IMR 18650 2500mah batteries, when they start getting low and you're getting late fee from batteries did you take them out and charge them or let them drain completely, the mod shows a little juice left in them but I'm getting a very light vape.  

Just curious that if I could build a device that would allow me to connect an eGo or Vision Spinner 2 type battery to a charger like a Nitecore Intellicharger i4 that it would work safely and efficiently in place of the usual USB charger? I have an idea as to how to make the connection but I wanted to get some feedback on the idea before I actually proceed to build it. I admit that I am no expert when it comes to Li-ion batteries but my goal is to be able to charge the "stick" type batteries that I own in a faster and safer manner than the seemingly low tech USB chargers. Thanks for any input offered.