Reading The Coil Gage

I have a TM 24 pro. I threw In a pair of Juggernauts just for astetic reasones.
I also have the geekvape mesh pro atty. With some, (most) juices I get a better flavor from from the mesh pro. With the TM24 pro and the Juggernauts I obviously get significant more vape. But my tank atty gives me more flavor. I fear pushing the 24 pro with the Juggernauts past 120-130w just because of the batteries i current have. Is it just the Juggernauts giving me the lower flavor or what? I have other coils, the alian, interlock alian, and the staggered fused Clapton. Is it the coil, our just the cloud chucking RDA o have.  

Where can I buy just the Clapton coils or wire for my SmokeTech Cloud Beast. I’ve been using the rebuildable coil for 2 years and it’s always been at .3 ohms. Over the last week it has slowly gone up to .52 so I took it apart and saw that the putter wire is degrading.

They are Clapton, correct? Or fused Clapton?  

I’m a mouth to lung vapor and currently using the holic rda and galaxies rdta. I’ve tried using ni80 round wire and superfine mtl fused Clapton ni80 wire. The round wire is so easy to work with and the superfine is harder but I’m getting the hang of it. My question is with coils that ohm out the same with each wire I get flat flavor with the round wire and the flavor definitely pops with the fused Clapton wire. Is this normal? Same juice, same wattage, same ohms and same rda and squonk.
I love working with the round wire but not worth it if I can’t get better flavor.  

so in my pursuit of vaping above 200 Watts I made a fuse 3x24ga gauge wrapped with 36 gauge and I tried three coils. it came out .07 I Vaped it at about 375 watts it was a hot vape but the ohms were very low so I had a problem with power my DNA 250c was reporting 65 amp output so I took that and put in dual fuse 22ga gauge wrapped with 36 gauge I ran that build triple coil I used it at about 250 Watts. what I am trying to do is vape at about 300 to 400 watts with an ohm or .2 to .3. the inner diameter will be 5.5 or 5 mm I'll be using the kanthal core wrapped with 36 gauge and ni80.I'm trying to figure out what my next bill should be to try to vape above 300 watts the restrictions I have is it can't be below point 1 ohm or above .3 ohm I have two aromamizer plus has with the series deck The parallel deck a second parallel deck and a single coil deck. The single coil deck fit 6.36 mm.

I also have the aromamizer titan.

What gauge would you Clapton?

Sent from my HD1907 using Tapatalk  

I just given druga rda v1 authentic.i tried to build it used clapton,fused clapton,alien,and simple wire with 2.5 & 3 mm id.but i got no flavor.my drop clone can beat it easyly.its frustating me.somebody please help me.what is the best build for my druga?  

I have a dna75 single 18650 that I take out with me.
I just ordered a bunch of small'ish MTL clones to use with it (Spica, Prime, V5, Millie, Gate).

I also have a DNA250C triple 18650 that I use at home.

I never used TC and don't really want to learn it nor power curves but might have to learn that later if I feel the need to. I already prefer and am grateful for escribe customization so maybe TC and curves won't be a PITA to add.

I couldn't get DNA250C's idiot-proof Replay Mode to work the one time I tried it with a dual SS fused clapton (others have had this problem, maybe it was the tank I was using).

For DNA250C bigger builds, I just ordered an Aromamizer V2 Plus RTA. And a Fatality 25mm. Fatality I might also use on the DNA75 with a smaller coil so battery easily lasts a day.


I'm guessing for the smaller MTL tanks to get round 316L if I do TC, and for wattage mode some Kanthal. I'm OK with even buying a DNA75C for Replay mode if the MOD is small sized though.

I really don't like ramp up time even with smaller coils, so maybe I should just learn TC and get 316L wire? For the DNA250C builds, ramp up would be long but I'm hoping Replay Mode will easily solve that.

Not sure which gauges.

And/or maybe for the MTL smaller builds get some thin clapton or something besides round? I don't want to kill the battery fast though but am OK with smaller puffs.


I already have some all-SS 316L Geek Vape Fused Clapton 26ga * 2 + 30ga, so that should be good for the bigger builds and Replay.



Thank you  

Hi, I just got the 8 in 1 pirate coil kit with 8 different sets of coils, I'm trying in a nonmechanical mod with the DejaVu RDA with a dual 0.45 Fused Clapton Coils, and I need help calculating at which wattage should I vape for Maximum Flavor.

Thanks for the help  

I'm very curious about what certain terms and numbers mean and how they came to be.
Here's a few that come to mind:
RY4
18650 battery (18 x 65mm?)
510 thread
510 (and 810) drip tip (both the number and the term)
Atomizer (it's not like it actually reduces liquids to atoms)
Delrin
ceramic coil (the heating element, wick or both)
Squonk
OLED screen
Tootle puffer
Steeping (like making tea?)
Velocity deck
Fused clapton, alien, ect.
Resistance wire (what makes it different than other wire?)
PEEK insulator
Terpenes
Coil break-in (not how to, but what does it actually do)
Feel free to answer and/or ask more questions.  

spent the day reading vape forums, made some new vape juice and wrapped up a bunch of new fused SS claptons, which are working awesome in my aegis X in TC. Now I can start the new year waiting for my new vape stuff to show up  

Put a new build on an authentic derringer. Was working fine before...put it on ohm reader before pinching coils...now can't get any reading. Just says .00. Other attys read on the meter. Even simple 28g single wrap won't read either. Any help would be great.