I have a ton of 0 mg juice that I would like to make 3 mg Nicotine, but I don’t know where to buy nicotine, what type I need or how to mix it properly. Some of you are going to say search the forums but all the old threads I’m not interested in as things change everyday with products and techniques. That’s why I am starting a fresh post and need help in which would be greatly appreciated.
So that’s one thing I need help with.
Second thing I need help with is deciding which dripping atomizer would you recommend. I’m looking for something that’s came out recently that has good reviews. I don’t have much time to search for reviews so maybe you know what’s hot and what’s not? I know it all comes down to personal opinion and I would like your opinion please. (RDA Specifically is what I’m interested in.)
Thank you.
With everything going on in the vaping world I was wondering if we’ll still be able to buy PG/VG premixed.
I buy premix PG/VG with nicotine already added so I’m wondering if I should buy 4 or 5 gallons to make sure I can get it.
Also I was told that if I buy a few gallons that I should freeze it or refrigerate it,is that right?
I sell mods and tanks so I have plenty to last years because I use to sell them on ebay until they ban selling them on the site.
I’m on private sights but don’t know what’s going to happen after April.
I live in New York so we already are have a juice ban so I mail it to a friend in another state and they forward it to me.
Now I’m buying premix so I can just flavor my own juice but I’m worried they might stop shipping premix PG/VG and then what will we do?
So any information on what’s ahead I’d appreciate your information. I’m new so I’m trying to learn how to find information on here.
Thank You
I’m curious as to why you shouldn’t do DL when using nic salts. I’ve got an Aegis Hero with a 0.6 coil at 15 watts. Even with the airflow closed off, it’s still to loose for a MTL. I keep reading and hearing I shouldn’t use nic salts for DL. The worst thing I’ve experienced so far is a mild headache. The nic salt is a 30mg.
Thanks in advance. ECF is my only true support group and I’m having a really hard time not smoking the stinkiest. Been back to vaping for about a month, and keep telling myself it’s all about baby steps. Not how many I smoke but how many I don’t smoke. I’ve got to quit for health reasons.
Hey everyone! So it’s clear that things are changing for all of you who live in the USA. I truly feel for all of you, and I still can’t believe this is happening. But, what is the impact that this is going to have in all of the other countries that basically depend on the US market?
I live in Perú and in most shops, if not in all of them, most of the juice that is sold is directly imported from the USA. Does this mean that we won’t be able to purchase these items anymore either? And what about new devices? I’m aware that most of them are made in China but under American brands.
I understand that the USA has probably been one of the biggest markets in regards to vaping. How is this whole thing going to impact the rest of the world? Our vape community isn’t that big, it just started growing last year. Stores don’t really make their own e-juices, it’s hard to get good quality ingredients.
I’d really appreciate your thoughts <3
So I’ve been vaping 12MG nic for a while on my Kayfun and it’s the right amount of nic to satisfy my nic needs. Only thing is at 12 mg I do still get a few harsh throat hits and I’m not sure what the best way to tackle it is.
I’m already vaping Nic salt nicotine with hi VG, suppose I’m wondering is their any super smooth eliquds in the market that mint remedy this? I’ve noticed with some eloquids at 12mg is less harsh than other liquids at 12mg. I don’t make my own liquid tho so I have no clue on how flavours may effect throat hit.
I might also drop to 10MG and vape at a slightly higher wattage which I’m yet to experiment. Any advice would be fantastic!
I’ve been away from vaping for about 7 yrs. I don’t have any of my old equipment, which now I miss very much. I’ve been trying to get back to vaping for health reasons, and having to learn all over again. Everything is dual coil. I NEVER used dual coil, but I’m trying to learn. I got a Vaporesso PM40, a Drag S a hcigar vt inbox and a POS squonker that I’m using for a dripper (reviews said they leak and short out causing me to fire by their self. I joy cappo squonk box).
Do I figure dual coil watts and amps like I did my single coil builds. I never got into the low sub-ohm thing. Maybe 0.9-1 ohm.
It’s good to be back in ECF again.
i was reading Another seemingly misleading article and something occurred to me tertiarily.
This dead kids thing isn’t just the biggest e-cigarette problem of the moment, it’s ALSO the biggest legalized cannabis problem of the moment as well. People are dying because they’re buying fake drugs they think are from legal sources.
What if this whole thing is an attempt to shift blame FROM legal cannabis TO e-cigarettes? Are all of the fast moving politicians from states that recently legalized? BT would have a big thing to gain because they kill two birds. They’re heavily heavily invested in legalized cannibis AND they hate ecigs.
Just a thought. Might be worthless. Thought I’d throw it out there though. Maul away. I’m interested to see what’s wrong with it.
I caMe home from work and seen my topside single was lit up on my dresser.I hadn’t used it in a couple days so I picked it up only to see that the wattage is going down non stop and won’t fire and it’s as if the wattage down button is stuck. It’s not though. I can’t find anything small enough to take the panel off so I pretty mad. Only
I’ve had Mabye 40 refills with this mod and never been dropped . Just use it on the weekends when I drive mainly that’s it . This is why I hate regulated mods. Anyone else have this problem? I don’t know why it doesn’t even come with a Alan key to
Take it apart.
Hello all,
I’m sure this has been discussed before as this is not a new tank, but after doing a search I didn’t find an answer. I also didn’t find much help on YouTube. I just pulled out my 2k18 doggystyle (I think that’s the correct version, it is a top fill) and built and wicked it. It has been so long since I bought this and read up on it, I don’t remember any of the tips and tricks.
As soon as I adjusted the airflow, ejuice started leaking in large amounts out of the holes. Luckily I was able to salvage most of the juice as it was premium juice I just bought from a store (not diy). What did I do wrong? Is it a wicking issue or is something else wrong? Any suggestions are greatly appreciated! Sorry if this has been covered before, but didn’t know where else to ask and I want to get this tank to work.
Hi friends, I’ve been busy with work and I haven’t been able to keep up with vaping news. Also, I felt kind of sad with all the stuff that was going on.
How are states reacting to the ban? Is that still going on? I’m not sure if I dreamt it or it actually happen, but I think I watched a video about how they were getting rid of the ban? And there’s going to be like a protest or something?
Sorry if the question doesn’t belong here
Greetings from TX, fellow vapers!
I’m pretty sure this question has been asked before, and I apologize beforehand if it has.
We all know about the proposed flavor ban, that’s a given. And it’s not a matter of ‘IF’, but more a matter of ‘WHEN’.
Sales of flavors will become illegal, but what about usage? If I’m vaping in public, will I be subjected to prosecution for ‘Possession of a banned Substance’, or is the ban restricted to sales only?
I’m so thoroughly dismayed and disgusted with the lawmakers and news media. I can’t trust anything that they say anymore.