Another Variable Sweet Spot Thread

I have the Istick 50 with a Nautilus tank. 1.7 ohm coil. What would be the highest watt useage recommend for this set up? I read the user manual for the tank and didn't see a max safe watt. I don't want a melt down. I did however notice that once I get above 18 or 19 watts the flavor of the juice starts to diminish. is this something that could be rectified with a different type of coil in the tank that would allow for higher wattage and give a better taste. Or a different mix of juice?  

I haven't seen this discussed yet, so I figured I'd announce my discovery:

I use a Kanger EVOD single coil tank, and a non variable voltage eGo style Kanger battery.

When I vape PG, it tastes like a grandma ultra light if I don't use a 1.8ohm coil.

But these 1.8ohm coils burn out instantaneously if I put VG in.

To vape the thicker VG, the 2.5ohm coils work wonderfully.  

Hey guys,
Just wanna drop in and say I ordered a Lemo2 to try my hand at rebuilding. It come with a coil and wick at .5ohm already in place. This thing really works awesome... tons of flavor and vapor and can even MtL hit if I dial down the air almost all the way. I do have two hopefully easy questions I'm sure someone knows the answer to...
How high of wattage can you push these or any handmade coil to? Also when you wick a new one, since it doesn't come with much info on it, how do you know if you're putting too much cotton in, and is there a trick to get the cotton right where it needs to be in that little wicking channel from the tank to where the coil is so the juice gets absorbed quickly and properly but without flooding it?
TIA and I know I'm know pro sub-ohmer by any means lol but for someone thinking about one this tank really works awesome.  

Hi everyone, I started vaping with a vaporfi pro 650 mAh battery with an atty at 1.8- 2.0 ohm. Then I upgraded to a provari with a carto tank from IBTanked, which I LOVE!!! I tried a friends Atlantis and it was so harsh I couldn't believe how hot it was. I actually couldn't get into my lungs choked me up bad. So I bought a subtank mini the other day and tried the 1.2 ohm coil with my provari and again way too hot and harsh. I tried it at the lowest volts and not much vapor and the higher I went the more vapor but couldn't enjoy it (get it into my lungs) I really would like to blow big clouds but how the hell do you do it??? What am I doing wrong?

Second quick question, I'm thinking about buying an e-grip, I like the tank being inside of the mod and it comes with a 1.5 coil but will I still have the same problem as above. I like a warm vape but not a choking hot one!

Thanks and Happy Holidays!!!  

I have a battery that is capable of going up to 6.0 V but the chart that came with the battery did not have 1.6 Ohm listed on the chart, it skipped from 1.5 Ohm to 1.8 Ohm.
I just need to know what the max amount of volts that I can use with this coil without reducing it's life expectancy to much.

- Also is there any reason to prefer variable wattage mode over variable voltage? because I always use V/V mode never even tried V/W.  

I've got one that has me puzzled. I went through two fills of my Aerotank V2 with Cosmic Fog's Milk and Honey when it started to taste burnt. I figured no big deal, let me change the coil and clean the tank and all will be well. Well, new coil and cleaned tank and about 4 drags in it tastes burnt again. Thinking maybe I have a bum coil I try another one. Same deal.
I'm at a loss. It's the same bottle of liquid, same tank (cleaned each time), same battery (iStick 50w), same wattage (8.9), same resistance (1.2 ohm). Anyone have any clue what's could be causing this? It's getting expensive in coils and liquid!

Thanks  

ive decided this is the tank for me. i originally wanted a falcon king, but i think this tank is a stepup from that. i cant decide which coil to go with. im looking for flavor over cloud production what would you recommend?  

GS Air coils/GS 3ml tanks.
I Googlefied this and Did see One place that said A worn out tank could make coils not last as long. (Sounds near fetched to me...)

Can an old tank start Causing premade coils to show Low ohms, like. 05 ohm?

I am pretty sure these are factory coils not FT copycats.
Bruce in Ocala, Fl  

I just got a Delta II tank as an entree to sub ohming after a disastrous adventure with a MELO. Strangely enough, though, while blowing an occasional cloud at 30 watts is fun, I find I also like running it with the air flow pretty restricted on the tank and at 14-16 watts on the regulated mod and taking mouth hits. Really nice flavor and "just right" (to me) vapor production.

Is running a sub-ohm coil at low wattage potentially causing any damage to my mod (iStick 30w) or my tank?  

I've yet to buy a VW mod but i will be soon. However the outcome of this thread will dictate which one i go for.
Ive been looking at a few:

MVP 3 Pro (60w mod)
Itaste 50w mod
Coolfire 4 40w mod
Kanger Subbox Mini

For arguments sake lets say you have a 0.5ohm stock coil in an Isub G tank on the Istick 50w. You also have a 2ohm stock coil for it.
The mod is capable of supplying 50w to both the 0.5 ohm coil and the 2ohm coil. 50w is 50w right? So what, if any, is the benefit of putting a sub ohm coil in the VW mod?
The manufacturers market them as sub ohm mods, but why go sub ohm if the device is capable of the same wattage on a 1+ohm coil, the experience would be the same?

Which leads me to a similar question. Would any VW mod from say 30w capable to 60w capable basically give the exact same experience for the majority of users assuming the same tank is fitted?

I'm quite new to this but i hope my question is understandable
Thanks