Aluminum For Atomizers... Is It Safe?

I have considered making my own replacement "tube" for glass part of atomizers (like my old PockeX that the glass is thin and breaks so easily) Also (after next May) might be making several hardware projects... even attys. Is aluminum safe around e-juice? I know (in general... like for cooking) I avoid using anything acidic with aluminum... I assume most e-juice (besides citrus/sour that I don't like anyway) should be fairly neutral. It's easy to cut and work with.  


Similar Content



Atomizer Protective Sleeves

I have almost a dozen RTA common atomizers. Themis, OBS Engine, Vandyvape Triple 28, Zeus Dual RTA, the Cerberus Sub-Ohm Tank etc. etc.

The problem is that I drop my vaporizer fifty thousand times a day. The glass often breaks. Is there some sort of protective sleeve or anything else that might work?

Thanks,
Matt  

Do Atomizers "wear Out"?

I have a CLT v2 Plus and a Mutation X v2 running on a Sigelei 150w and an Asmodus Klone v1.5. I am a cloud chaser, just to get that out of the way. Both attys on both mods used to CHUCK the clouds like nobodys business. My builds have not changed, if anything I have gotten much better at it obviously with time and practice. But boths attys on both mods just don't do what they used to. Neither performs in a way that is something to be "ashamed" of, if you will. But they don't do near what I used to get out of them. Maybe it's the batteries? I have 10 18650 batteries, all have been in even rotation for a while now. Although I would think it wouldn't be such a big deal in the Sigelei, it being regulated and all, right? Or maybe I just suck and don't know it? I am not against getting new atomizers, as I love throwing away hard earned money on vape gear I don't really need as much as the next ECF member, but still. Thoughts?  

Gluing Glass To Metal. First Gen Kanger Protank.

I figured this would be the Second best place to put this question but the other forum doesn't produce any replies. So I posted it here. Simple answer if you know what to use to glue glass to metal and will be non toxic!

On to the question, I have a first generation Kanger Protank where the body, glass bit, is glued to the bottom metal piece that screws into the Skirted piece of an eGo battery adaptor. One friend was using the glass piece to screw the Protank onto and off of her mod and to refill the ejuice. Short story shorter she popped the glass piece of the first gen Protank.

Big question part, what type of adhesive should I use to "GLUE" the Glass to the bottom metal Piece. Something that is non toxic and will survive the repeated stresses of day to day use that a Protank would encounter?

Thank you for your understanding, Moderator's, the Cross Post.  

Tank Suggestions That Will Last Long?

Hey guys looking for a tank that will last me long. As we all know CE4's aren't the best mine died pretty quickly. Looking for a tank that will last me long, and wouldn't need replacement coils very often. Also hoping these tanks are glass so they don't break with certain juice. I was thinking the evod glass 2 or the aspire k1. Any ideas? And will these tanks fit on my battery?

Zen Pen Electronic Cigarette Kit  

Ma Ban Is Getting Annoying!!

So the "mystery illness" is no longer a mystery, why not lift the ban?
Finding hardware is fairly easy, ordering juice is another story.  

Question Regarding Long Term E Juice Storage

Hi,

I just bought a litre of 100mg/ml unflavoured PG E juice.

I calculated that if it doesn't go off it should last me 10 years. It came in a sealed plastic bottle.

I bought a dark amber glass bottle (which I have sterilized) to put it in but I was wondering if it would be better to leave it in the original sealed plastic bottle rather than breaking the seal to put it in the glass bottle? I took the lid off and it has a proper seal over the rim of the bottle like a Gatorade.

Also the glass bottle I bought came with a plastic lid but I doubt it will be 100% airtight.

Thanks for your advice, any other tips would be much appreciated.  

How To Repair A Glass Tank With A Small Gash In The Glass?

i just noticed there is like a gash on the glass part of my tank i was just wondering if i could do to fix it instead of having to go out and buy another one (so it won't leak)? like tape or w/e

it is on the outside and is not leaking ATM  

My Complete Setup (mod, Rda, And Juice)

Hey everyone, I just wanted to post my setup here, nothing to fancy so just take a quick look and feel free to leave a comment or reply.

To kick things off I've got a Seeker Mech Mod by EHPRO. It's a sleek design, all copper, and easy to press button. Little short and thick for those of us who like our setups to look beefy.

Atty- The Tobh Atty. It is a pain in the butt to take apart from the get go but once you get a bit of juice on all the O rings it comes apart fairly easy. Good deck to build on all pre-drilled holes on the three posts 1(+) and 2(-) (Obviously). Deep basin to hold plenty of juice for our drip and drivers safety. My current build is a dual single coil coming in at 0.28 ohms. Using a regular cotton wick.

Juice- "Bliss" made by The Artisan Vapor 100%VG This juice is an explosive flavor of fruits, and for being 100%VG it has a heavy flavor. 39ml bottle runs at 20$ not to bad for a good juice. When I drip with a full basin it lasts roughly an hour, and I heavily use my vape.

Battery- This thing is one of the best right now but I'm still limited on what builds I can do. My 0.28 is safe, however my 0.22 is unsafe (Go figure) ANYWAYS! (Specs) MNKE IMR-26650 3.7(low) 4.2(High) 3500mAh.

So I think that's all. Thanks for reading guess, and questions or comments just drop it down below. Goodbye and VAPE ON!
 

50/50 Vs 70/30

I have been making my juice 50/50 from the beginning about 3 years. I can't remember my initial reasoning. Every atty I have leaks to one extent or another. It's about time to make up another 500 ml of juice. I was thinking about making it 70/30 hoping the thicker juice will stop leaking. Any advice?  

New Mod

im looking for a new mod budget (50ish dollars) would this $47.37 ATHENA Smart-60PB VW Variable Wattage APV Box Mod - 5-60W / 1*26650 / aluminum / black at FastTech - Worldwide Free Shipping be good, and do i need to get any batteries for that i currently have 2x of 18650 batteries