Got kind of a strange question that I probably should be able to figure out on my own but I'm really bad at math.
What would use up the battery quicker.. a quick let's say two-second burst at 50 Watts or a 6 second press at 30 Watts? Tia.
Hello—am I calculating correctly? I now have a Jackaroo mod that takes a 21700 so I ordered the Molicel 21700 P42A. Someone on the forum helped me out once before and here is the calculation I used. I figured in at 30 watts –I am usually between 23 and 30 watts
30 watts/3.2 battery cut-off voltage/.9 - 90% efficiency = 10.4 Amps
(30)(3.2)(.9) ---max wattage to be used is 86.4
What about my 2 battery mod --is that calculation for each battery. For example, I ordered a Geekvape Aegis X that takes 2 batteries so If I had that same calculation would my wattage be 86.4 per battery?
I am looking for a dual 21700 mod. The available ones, I probably will buy but, there aren't many to choose from. There are several single 21700 mods. My question is how long (on average) will a single battery mod charge last (I know this question is subjective). I vape around 65 watts, most of the ones I have seen online are rated 100 watts. I do not want to leave home and my mod die out because it was a single battery mod. I know I could carry a spare charged battery around, I just do not want to have to. Thanks
The 65 watt M65 I got is defective. So I'm returning it and replacing it with a new mod. But I'm stuck between 2 mods. The Smoktech X-Pro M80, or the Vape Connexx 150. Both look great but I'll give you a quick run down on the pros and cons of both.
Smoktech M80
Pros - 4400 mAh built in battery, 80 watts max power, .2-3.0 ohms, pass through vaping, decent sized and stylish.
Cons - only 80 watts, built in battery, 4400 mAh.
Vape Connex
Pros - like the bulkyness of it, huge firing button, 180 day warranty, interchangable 18650, magnetic back, .1-3.0 ohms.
Cons - no pass through, never heard of the brand.
So should I stick with a brand I know? Or risk it and get a really powerful mod? Any input is appreciated. Thanks y'all.
I'm looking for internal battery box mods that has wattage option higher than 50 Watts. So far I've found Smok Xpro M80 Plus, which is an internal battery box mod with 80 Watts power at a great price. ($55) Is there any other internal battery box mods? MVP and Istick serieses are of course excluded here.
Hello All,
Does anyone know which 18650 battery would last the longest when vaping at 13 watts? I have listed some below but any not listed recommendations are welcome as well.
(PS please don't respond with battery safety information or suggestions for me to look at mooch ratings)
Also, does anyone know if the vendors in the last 3 below links are reliable?
Thanks!
Sanyo NCR18650GA 3500mAh 10A
AW Protected 18650 3400 mAh
Samsung 35E 18650 3500mAh 8A Battery - INR18650-35E
Sony VC7 18650 Unprotected Li-ion Battery
18650 Battery 3500mAh Protected Li-ion 3.7V Rechargeable Orbtronic 10A Dual Protection (Panasonic-Sanyo inside) ORB3500P For High Performance Flashlights
Hey everyone, Sorry it's been a while.
I recently purchased an ipv mini 2 a month or 2 ago and just today I started having problems with it. I was running it on 40 watts and all of the sudden it adjusted itself all the way down to 5 watts. I tried to bring it back up to 40 and it froze up and said please unlock... but it was already unlocked. I took the battery out and I'm gonna give it a rest for a while. This is very strange to me but I was wondering if anyone else had a problem similar to this or not. Any help would be greatly appreciated! Thanks!
p.s. not sure if this is in the right forum. Sorry if it is not.
Somehow, I inadvertently pushed the buttons just wrong today and it went from 7 watts (my usual power setting) to 50 watts (the highest setting). I didn't even mean to push any of those buttons.
I experienced instant burnout and a horrible taste in my mouth and the coil was instantly ruined.
Do people really vape at such high power? If so, how often do you have to replace the coil? And how many ohms are you putting that through? The coil I replaced it with is 1.77 ohms which is about the same as the one I burned out.
50 watts seems so excessive to me that I double-checked and yes, that's what it says it goes up to. Even at 7.5 watts the coils seem to burn out too fast which is why I vape at 7.
I feel like Nigel Tufnel designed this thing. "But it goes to 50. That's 43 higher than 7. So it's like 43 more. So when you're vaping at 7 watts and you want that extra push over the cliff..."
(I'm actually impressed that Nigel could do the math to figure that 50 was 43 higher than 7)
Does anyone know anything about this? I heard it's going to 60 watts. I was wondering when the release date and battery life is.
Hi guys. Can I use my INR 18650 Samsung 20A battery with a .5 coil and try out 50 watts? I have a new mod.I have looked through the titles and searched all day but don't exactly know what I need in terms of battery. I don't even know how to use the calculators properly. Can someone direct me to some info which would help me. Thanks
I've been using only twin-18650 mods for some time, and before the shipping ban came into effect, I bought a backup of my most-used mod (a Geekvape Aegis X), but since the 100W single 21700 / 18650 Voopoo Drag X Plus was only $35, I also picked up one of them as another backup.
I vape exclusively on RDA's, typically with a 3mm dual coil twisted build with 24 or 26 gauge Kanthal or nichrome-80. 5 or 6 wraps with 24 gauge, 6-8 wraps with 26 gauge. I typically vape these between 90 and 110 watts.
I did not expect to get a 'true' 90-100 watts out of the Drag X, so I set a target of around 60 watts. I mounted a 3mm dual coil twisted 28 gauge build with 6 wraps, which on my Aegis X vapes great at 60 watts, and very good at 50 watts. It measures at 0.45 ohms.
But on the Drag at 60 watts, it only vapes at what feels like 30 watts on my Aegis. Setting it higher makes no difference either, it seems to 'top out' at ~30 watts regardless of the setting. 60 watts @ 0.45 ohms is only around 11 amps, so I doubt I'm hitting an amperage limit.
I am using 18650 batteries (VTC5A), and it is about time to replace them, as I am only getting around 70% the battery life as I did when new. I will be picking up some 21700 batteries at the same time, which hopefully help with things on the Voopoo.
Does anybody have any good experiences with ~60 watt builds on a Drag X Plus?