[q] Battery Quality

Taking the advice of ECF members, I'm planning on buying Samsung INR18650 25R batteries for a 30w device (as opposed to my current Panasonic that has a 6ish max amp output). My local vendor has them, but two things are strange to me.
1.) Their price is actually a little cheaper than Fasttechs, usually products there are quite more expensive
2.) They are green, while FT and a couple other places i've googled has them as blue

This is the vendor site:
Baterija Samsung INR18650 25R 2500mAh - 18650 - Li-on, Ni-Mh baterije - Baterije i punjači E cigarete | E tekućine
This is how they look pretty much everywhere else:
$9.75 Authentic Samsung INR18650-25R 3.6V 2500mAh Rechargeable Li-Ion Batteries (2-Pack) - 35A peak discharge / 22A continuous discharge at FastTech - Worldwide Free Shipping

So are the batteries from the first site fake or what's the deal with that?
 

So, I know that the Sony VTC batteries were the like "Go-to" battery. But they are being faked a lot and are hard to come by some authentic ones.

So whats the next best option?

I have a few different batteries and I definitely can tell the difference in the quality of the hit, and the life of the battery.

I have a red IMR 2000 mAh 18650 and it hits the worst out of all of my batteries.

Then I have a blue samsung battery (Can't really read the writing) but I can see it says 25r on it. This one hits decent.

Then I have a green 2600 mAh battery. Its a beast. Hits like a champ and lasts long. I would like to find a similar battery to this one. Im guessing this is the Sony VTC 5.

I really want to find something that is just as good as the Green one.

Does anyone know where to find these or a similar battery that is 2600mAh 30 amp? If so, are there any deals going on online where I could get a good price? Id like to order some new batteries.

Thanks for the help all!


Edit. One more question. Anyone know the difference between the Amps on each of the batteries? Just from guessing id say the red is 20 amps, blue is 25, and the green is 30? Does that sound right?  

Hey Guys,

I have been wanting to use a mech mod for quite some time now. But I didn’t want to rush into things, given that they can be dangerous if not used properly.

To prepare I have studied ohm’s law and have a pretty decent grasp on it. And have a calculator app on my phone.

I have checked out Mooch’s battery recommendations and have a good idea of what batteries to use and which to avoid.

I still do have a few questions I was hoping an experienced Mech user could help me answer:

- What would be the “sweet spot” as far as resistance and safety go for a dual coil set up? Obviously I want to go as low as possible and have a hard hitting vape. But I also want to be safe. I plan to use a dual 18650 Parallel mod (The Clutch X18). I would be most likely be using Sony Murata batteries as I cant find any Samsungs where i live. I’m thinking somewhere around 0.17-0.2? Or would it be safe to go lower than that? I will of course test my build on an ohm reader and regulated mod before throwing it on the mech to be safe.

- Are there any other general safety tips? Ive heard that you want to screw the Atty down all the way first, before inserting the batteries. And then insert the batteries. And when removing the batteries i heard you want to slightly unscrew the atty first, and then carefully remove the batteries? Can anyone please confirm if this is correct.

- Is its safe to chain vape on a dual 18650 parallel mod? When I say chain vape I mean like maybe taking 5-6 big hits back to back. Then waiting 3-5 minutes, dripping some juice and then doing another 5-6 hits.

- Is there anything I should be monitoring while I’m vaping? Like the heat of the batteries? From what I’ve read, the batteries drain quite fast on a mech. And after some experience you will just kind of know when they need charging because the vape experience changes. Is there anything I’m missing? Or something i should be looking out for?

- I can only vape in my kitchen. And sometimes there might be a little bit of water on the counter from someone’s drink sweating, or drops after someone washed their hands etc. Is this a risk? I will of course do my best to keep all surfaces dry. I’m not talking about large amounts of water or submerging or getting the mod really wet. But just what one might find on a kitchen counter.

- Any other tips you could throw my way would be great!

Thanks in advance!  

Hi everyone,
Hope your all having a great weekend! Hopefully someone can help me figure out any good canadian or American reputable vendors for 18650 batteries for my arrow sense mod. Out of all the vendors listed in the battery thread, only one had the batteries I wanted, but it was in the US and would cost over $50 for shipping. Hoping to find shipping for $20-30 canadian instead. I am particularly interested in the batteries on the forums listed as tested by mooch in a stickier post. Or Sony battery with 2500 mah , I like to vape with two 18650 batteries at 60-80 watts.  

Efest IMR 18650 LiMn 2800mAh Battery - Flat Top - 35 Amp

They claim to be 35a continuous & 80 pulse. . .
Has anyone tried these?
if they really live up to the specs these will be the best batteries on the market now since no other battery can claim a 35a continuous rating. Not to mention 2800mah? Dang. Just note these are not the same batteries from before. The previous ones had a 35 amp pulse rating  

I ordered two of these batteries from FastTech. The cheap price and high capacity (without having a mod or some awkward huge battery) attracted me to them. Some two weeks later they show up...

I have two Puff King chargers that came with starter kits we bought at a B&M store. We've been using them with Tripl3 eGo batteries, one Puff King battery (and another Puff King battery, which was taken back and exchanged for another eGo-T battery, which broke), and so far no problems screwing any batteries in. These two from FT show up however and neither will screw into one Puff King charger, but they both did into the other (same charger, down to the model number and everything). Now, one battery from FT still screws in, but the other doesn't.

I took the non screwing in battery to a local B&M store and the guy there was able to screw it into one of their chargers. He handed it to me, and I unscrewed it, screwed it back in, unscrewed it again, and then neither of us could screw it in again. Now I have one battery from FT that will screw into one of my chargers, but not the other. The other battery will charge, but it has to just like sit in the charger and hope the connection stays okay for it to charge. I still have no problems screwing any of my other batteries into either charger, just these ones from FT. Also, it's worth mentioning that the FT batteries never seemed to screw in right... it always felt weird and finicky getting it to go in.

What's up with these batteries? They claim to be eGo/510 threaded, just like my other batteries. They look just like my other batteries too, except they won't screw in right...  

International Travelers

I am now in the US and I am going back to the Philippines for about a year.

I have a couple of VW box mods and a mech. tube mod along with 3 or 4 various atomizers. I also have a bunch of 18650 and 18500 batteries along with a couple of those skinny EGO style Twist batteries.

Since I make my own juice, I have some large bottles of VG and some 60mg Nic unflavored PG base, along with some bottles of flavorings.

I am thinking that everything I have goes into the checked bags except for the batteries which go in carry-on luggage ... does this sound right to you?


One thing else ... If I have a small EGO Twist battery with a small Kanger Aerotank Mini on top of it (for vaping at the airport once I get into Hong Kong), do you think I would have any problem with airport security if I put that in the TSA tray along with my other carry-on junk that's in my pocket before going though the metal detector? ... The Aerotank Mini in my pocket would have a little juice in it.

Thanks,  

Hi
I'm usually vaping at just 14 watt (mouth to lung, nothing heavy).

Now I'm soon getting a new mod that takes 21700 batteries, so I'm searching for the best batteries without spending too much or too little.
(aiming for Samsung, LG or Sony, to be safe)

I see some batteries hold 5000 mah, like the Samsung 50E (cyan).
But it only has about 10 amp discharge rate.
So less than half than "regular" 4000 mah batteries for example.

Is 10 amp more than enough for vaping at just 14 watts, or should I find a more "high-drain" battery?
I want to be safe and avoid risks or heat.  

Me again with battery questions

I ordered and paid for Samsung 25Rs from my local vape shop. They just informed me that they made a mistake and that battery is not currently available, and have offered me these as replacement:

Sony VTC5

Sony VTC4

LG HE2

LG HE4

Should i take any of these or should i wait for the samsungs to become available again? (who knows when that will be)

I'm leaning towards the VTC5 just looking for some confirmation from you guys that that is the right choice !

Oh and i should mention, the top wattage i will be hitting is 30w and i do not sub ohm.
Thanks!  

Herro!

So, I always used to use mech mods from about 6 months to a year and a half into vaping. For the last 6 months I've been on regulated (iStick 30W and 50W).

When I switched to regulated I retired my mech mods and 18650 batteries to the closet. I made sure they were all around 50% charged because I heard from someone on here that was the best condition to leave them.

Well recently I've had this curiosity to try them again, only for at home use, mainly for the novelty of it.

So, my question is, what will I have to do to revive these batteries? Are they safe to just throw back on the charger and use when fully charged? Or are they not safe to use?

Batteries: 4 Sony VTC 4's (all were acquired about a month before I stopped using mechs), 2 XTAR (Sony) VTC 4's (about a year old now) , 2 MXJO 2500mah (20A LG's) (about a year old now).

Let me know! Thank you!

Vape Happy,
Cullin Kin