Vaporesso Drizzle Kit Top Lid Stuck

OK so I have a Vaporesso Veco Solo Kit and my tank is stuck. I've tried rubber gloves, rubber and pliers, lock pliers and anything else you can think of. The tank won't budge. I need to change my coil but how can I get this damn tank off.

Not the best picture but you can see the tank.

UPDATE: After continuous trying with multiple methods, my glass has decided to give up and is now in 4 pieces so I need either a new glass or new vape entirely.  

Hi,

Threads are going to stick, it's a fact of life. Here's a fix that works.

You'll need 1) thin rubberized gloves 2) two pairs of pliers (with curved jaws, not straight) and 3) 220 grit sandpaper for metal

The steps are;
1) buy a pair of small-sized mechanic or garden gloves. The ones with rubber over fabric
2) cut off one inch of the finger tips (off the gloves, not your fingers)
3) slide the tips over the jaws of your pliers
4) put the pliers on either side and twist; righty-tighty, lefty-loosey (unless you have backward threads, usually not)

A couple things I found that improve it even more;
1) used sandpaper to smooth the sharp ridges on the pliers; wrap the sandpaper around a pencil till it fits the curvature of the ridges, I put the pencil in a drill and made quick work of it. They won't cut through the gloves so easily.
2) gently sand the tops of the threads on your tank, rough areas here sometimes cause the sticking. Don't sand much, just till they feel smooth.

it works, I Gar-on-tee it.


 

So I recently bought a brand new Vaporesso Gen mod. Normally I stay away from compression/press fit 510 connections but I decided to give the Gen a shot. I've only had it 1 day, and already I've noticed that the 510 connection is raised slightly above the top of the mod and with a tank connected it is slanted towards the back of the mod. From what I can tell the 510 isn't loose at all. But it still slightly worries me. And a couple times I've taken a hit and everything is fine. Then all of the sudden while my finger is still pressing down the fire button it stops firing. Has anyone else experienced this with the Gen?  

anyone know if its possible to change the rubber gasket, or if its sold. It seems to go bad pretty quicj  

Just title Can I use CCEELL 0.3 vaporesso coil on my vaporesso swag? And how much watts is recommendable?  

Hi everyone,

I haven't been active for a very long time because i had gone back to my stinky habit again.
Probably because of the place that i am staying doesn't allow the sales of E-ciggy.
Recently, i have noticed that the people around me have started using small little pen device or some called it a Kit & close pod system whatever so. What i seen is just an ordinary device similar to my very first vape pen over a decade ago. Until I managed to get hold of my friend's RELX device and immediately i know what i'm looking for. Everything is so simplified, popped in the juice cartridge and start smoking like a cigarette! And I don't even need to press or hold any switch?! The best part of this device is so small and handy that can easily hidden under the radar of the place I stay but of course the disadvantage is that the cartridges cannot be refill and is costly. Anyway, for someone lazy like me, it should be perfect.

I have googled search a few brands with similar product specification and out of nowhere Bold Vape Lite caught my attention. Have anyone tried and review its product yet? How is the e-juice and build qualities? Because it's only cost $28 for set of kit and 5 cartridges? Dirt cheap compared to my friend's Relx!! Attached is how the package look like. Trust me and google it yourself. Anyway the cost is so low, I think no harm trying and I will update you guys again soon. Meantime, stay safe and healthy everyone

 

Hey there fellow vapers,salutations from sunny Spain!!

Currently at the moment im using Using a Vaporesso SWAG 80w with a Wasp Nano RTA.

But the thing is that where is live is really i mean really humid,that and the fact that there is little to no ventilation where i vape is a problem.
I work at home so i can take care of my pops (severe liver failure,hoping to get a transplant soon,damn dialysis leaves him in bad shape) so i spend hours in the room where my pc is.

I have a vape shop where i live but the owner (cool guy,really nice so dont blame him) he knows little about MTL's,his knowledge is basically about RTAs,drippers,etc,etc.

So im looking for some advice to what MTL I could purchase that would give me a nice ''hit'' with very low i mean low like a normal cig cloud production.

I have watched alot of videos but they all seem to put out huge amounts of vapor,currently im using mine at 25W and with the airflow almost closed up but meh it doesnt feel right and it still is to much cloud for such a closed space.

When i leave home yeah i enjoy a big cloud so i open the airflow all the way up and put the sucker to 50W/65W but that is only when im outside.

So anyway,could anyone please recommend me some MTL Atomiser with the attributes that im looking for?
good flavour and cig like cloud production is basically what i need.

Thanks in advance for the replies,and sorry for any grammatical/syntaxis errors,english isnt my native language.

p.s. whatever brands/models you recommend i would have to run them by the owner of the shop to see if he can get them.
easier to order online but he is a good fellow with a shop that is struggling a bit so i prefer to order thru him so i can help out atleast a little bit.  

Hi, a few weeks ago i just switched from a old Luxe to the new Vaporesso Luxe II 220w kit and in like two weeks i managed to melt 3x GT coils(GT, GT2 and GT4) then i switched to my old atomizer from the previous mod and so far, besides not having a good flavour or flow it at least works.
Any tips on what the problem may be?  

I'm a single coil guy (laziness) :

After the huge push and trend of having only extremely close and tight wraps I see a few more people doing some non touching coils:

What are the performance differences anyone has noticed in these different style wraps assuming gauge and diameter the same ?

(Cotton wicks)

Second question

Thx


Sent from my iPad using Tapatalk  

I just got my Aspire Atlantis in, and to be honest I'm not at all satisfied, and I can't help but wonder.... Did I get a defective unit?

I bought it and the Kanger Aerotank Turbo quad coil tank. My resistance on the Kanger is registering at 0.9ohm and I'm sending about 23watts to it. The amount of vapor is excellent, flavor is good, and it's not an overly warm vape at all.

So then I slap on my Atlantis. The 0.5ohm is registering at 0.6 (big whoop...lol) and I'm sending 28 watts to it. First, the hit is BEYOND airy. I'm on the lowest airflow setting and there's no pull required at all. I believe it isn't sealed well somewhere along the airflow adjustment, because when I blow a bit of vapor back into it as a test, it comes out of the airflow hole (obviously) but it also flows out of other areas around the airflow ring. This doesn't happen with my Aerotank Mega, Aerotank Turbo, or my Nautilus...

Furthermore, the hit itself is just BAD. The flavor is off, the vapor is WAY too warm to be enjoyable, and where as I exhale nice sized clouds using the Aerotank Turbo, I exhale pathetic small clouds that aren't even thick when I use the Atlantis. Considering its a lower ohm with more watts going to it, how is that even possible??

So, no resistance at all on the airflow, even on its smallest setting, and obviously I have to be getting air from some areas around the airflow ring. The vape itself tastes bad (not burning cotton bad, just a bad flavor), and it's VERY warm. If I try and pull on this the way I do with the Turbo (only 0.3 ohms higher), I exhale a measly small thin cloud AND I often get choked when doing so.

So I'm just curious.... Is this the way this tank hits?? I can't believe how many praise it if so, I see no appeal. So I can't help but think I must have gotten a defective tank. I've tried lowering the watts down to about 22watts just to see, and even though the vapor wasn't AS hot, it was still uncomfortably warm and did not do my liquid's flavor any justice.

Any thoughts? I really would like to hear if this is how these new sub ohm clearos are going to hit, because if so I have absolutely no interest in making the switch.

Thanks in advance,
Finch