Ma Ban Is Getting Annoying!!

Vaping death toll rises to nine as man dies from e-cigarette lung disease Ninth person dies of mystery vaping-related illness 2nd vaping-related death in Kansas brings national death toll to 9  

I have considered making my own replacement "tube" for glass part of atomizers (like my old PockeX that the glass is thin and breaks so easily) Also (after next May) might be making several hardware projects... even attys. Is aluminum safe around e-juice? I know (in general... like for cooking) I avoid using anything acidic with aluminum... I assume most e-juice (besides citrus/sour that I don't like anyway) should be fairly neutral. It's easy to cut and work with.  

https://www.washingtonpost.com/health/potential-culprits-in-mystery-lung-illnesses-black-market-vaping-products/2019/09/24/cb5b708e-d98d-11e9-ac63-3016711543fe_story.html#comments-wrapper

Finally an honest article on the vaping hysteria!
This is in today's Washington Post  

NN's Corporate Statement Regarding the "Vaping Illness" - Full Text & Video


I looked to see if this was posted elsewhere.

It's a pretty interesting(but long) read.  

It all started as I was bored one day and decided to drop by the local vape shop and see what they had for sell. Silly me I bought a "pod mod" to see what all the fuss with the devices was about.

Enter the mod on the far left. A "pod mod". I don't recall what it cost me but it was small and light and not very expensive and the sales person claimed "it won't leak" so I figured - what the heck, I'll get it and make up some 'salts' juice and try it out.

While it was fairly easy to fill and the sales person was right, it did not leak. It did suffer from a number of 'issues'. Namely dismal output, battery life and juice capacity. Did I mention that the "flap" to get at the microUSB connection for charging was challenging? While I tried to make use of it while I enjoyed my morning coffee after a few weeks of ether running out of juice or battery at just the wrong time I started looking else where. However now that I had 30ml of 50mg juice mixed up I though I'd 'upgrade' my "salts dispenser".

Move to the setup in the middle, a Nautilus mini clone (with aftermarket RBA) and a iStick40. While the RBA is downright painful to build on I left the 1.4 ohm Kanthal build on it and filled the 2ml tank with the 50mg juice. The iStick40 is said to have a 2700mah battery (and optional TC with NI coils). The iSticks have their USB ports on the bottom. So with the tank filled up and the iStick charged up I again went about my business. This setup was a vast improvement over the 'pod mod'. Better (but not great, after all it is a Nautilus mini) output, longer battery life and more juice. It felt good to be able to grab some gear out of my stash and put it to use. The setup did have its downsides, namely the filling of the tank. Tanks of this era are filled by unscrewing the bottom+coil/atomizer out of it and squeezing juice directly into the upside down tank and then screwing it back together. While I had a dozen or more of this style of tank in use in my early vaping days, I've grown accustomed to easy top fill tanks so started thinking that I could do better so back to the stash I looked.

Enter the setup on the right. While the mod itself is fairly new (Dicodes 21700) the tank is a eLeaf "Lemo2" (only slightly newer vintage then the Nautilus). This setup gives me 3.2ml of tank, even higher output, top fill ease, longer battery life and TC of the coil. The three drawbacks of this setup are that its MUCH larger and heavier than the pod mod that I started out with and the only way to get new energy into the mod is swap batteries. Last and importantly (for those that like to use coil wrecking flavors) is that the only way to service the coil is complete disassembly of the entire tank to gain access to the coil. (not much of a worry when vaping pure unflavored juice).

This is the setup I've been using while enjoying my morning cup of coffee though. Just all part of a evolution.  

California man dies in 7th vaping-related illness as CDC steps up e-cig probe - CNN

The latest California victim had been sick for several weeks after he suffered a "severe pulmonary injury associated with vaping," Dr. Karen Haught, the Tulare County public health officer, said in a news release.​

More links ...
‘It is time to stop vaping’: California man dies in 7th vaping-related illness 7th death linked to vaping reported A 7th person has died in the U.S. from a vaping-related lung illness  

Anyone try ordering from Fasttech since the shipping ban? I mean they always labeled their packages as "Electronic parts" or "screws" and innocuous things like that. So I was wondering if they could still get stuff through or if customs was x-raying and confiscating that stuff.  

I need some 510 nuts (long story but it would really help to have them) Local hardware stores have "5-08" but not 510 (I assume they have finer threads) Where can I find these?  

If indeed the vape mail ban puts an end to this party, I'm wondering how people are approaching it. Obviously there is cheap hardware and expensive hardware, with the idea that the "good" stuff will last longer. I'm thinking especially of box mods. For example, DNA chips. Are they supposed to last longer than what you get in a $40 mod?

So, are you buying fewer good things, or more cheaper things? Are you saving the good stuff for some day in the future and using up the cheap stuff now? Or are you using the good stuff, thinking that it will last a long long time.

Myself, I don't have a strategy on this but am interested to hear what others have to say.  

Hey everyone, I just wanted to post my setup here, nothing to fancy so just take a quick look and feel free to leave a comment or reply.

To kick things off I've got a Seeker Mech Mod by EHPRO. It's a sleek design, all copper, and easy to press button. Little short and thick for those of us who like our setups to look beefy.

Atty- The Tobh Atty. It is a pain in the butt to take apart from the get go but once you get a bit of juice on all the O rings it comes apart fairly easy. Good deck to build on all pre-drilled holes on the three posts 1(+) and 2(-) (Obviously). Deep basin to hold plenty of juice for our drip and drivers safety. My current build is a dual single coil coming in at 0.28 ohms. Using a regular cotton wick.

Juice- "Bliss" made by The Artisan Vapor 100%VG This juice is an explosive flavor of fruits, and for being 100%VG it has a heavy flavor. 39ml bottle runs at 20$ not to bad for a good juice. When I drip with a full basin it lasts roughly an hour, and I heavily use my vape.

Battery- This thing is one of the best right now but I'm still limited on what builds I can do. My 0.28 is safe, however my 0.22 is unsafe (Go figure) ANYWAYS! (Specs) MNKE IMR-26650 3.7(low) 4.2(High) 3500mAh.

So I think that's all. Thanks for reading guess, and questions or comments just drop it down below. Goodbye and VAPE ON!