Hi guys, I have an rpm40 which spits juice in the Nord and the rpm coil on 50vg/50pg. I want to get better juice which will not have the same obstacles which one would you guys recommend? Thanks.
Hello everyone, I usually vape with my coils around 1.5 ohms in my clearos and my juice at a 50pg/50vg if I lower my ohms to 1.0 or 1.2 Should I change my ratio to a higher ratio of vg ? I was told that my preferred ratio would taste burnt if I did. Thanks
Need a little help on getting an mtl kit for my brother.
He currently has a pen style device and says it hurts his throat, I suggested that the nicotine level might be the culprit but he says even 6mg nic hurts his throat, I'm seriously thinking that as he vapes 50pg/50vg that the pg content might be the problem.
The question is what kit could I purchase that's mtl, stock coils and can take a thicker juice.
Mtl is not my bag so I decided to ask for some advice.
Thanks
My English not good but hope u guys understand....
I have question...I am gonna talk about rtas....soooo we got the air flow part of the tank when is the coil and that we suck air through it...and there is the juice part where holds the juice....and thing that seal the 2 spaces is the cotton....the juice reaches to the coil throught this capillary action I guess...I was thinking tho while we suck don't we create also vacuum and draw more juice if the airflow can't keep up with our draw?? And if that's correct then...this space that holds the juice should be sealed good so that it can't draw air lets say for example from the top fill cap and then push more juice into the coil cause it will have the atmospheric pressure?? Or maybe it's the opposite and the vacuum we create while we puff should get lose over time while we don't vape??? I am trying to get more understanding about how stuff works hope makes sense and someone can correct my mistakes and make things clear for me
74 days without a cigarette so I’m still new to this whole vaping thing.
Started with Juul, got tired of refilling pods very quickly.
Switched to a Smok Nord. Have grown tired of the hit/miss with cools.
Just got my Zenith tank. Went ahead and got the Kroma/Zenith kit and it’s my first non-pod setup.
Like it so far. Only issue so far is there seems to be a lot of juice coming through when I take a hit. When I take a drag but put a thin white piece of cloth over the tip there is a very noticeable amount of brown stain on the cloth. Had the same issue when I got my Smok Nord but I corrected by switching from 50/50 nic salts to a 70v/30p freebase.
Currently Using the same 70vg/30pg 6mg Halo Tribeca.
Using the 1.6ohm coil;
Started at 14 watts;
Dropped to 11 watts and it reduced the juice but also the temp of the vape.
Adjusting the airflow doesn’t really make a difference.
Anyone else having the same issue with the amount of juice coming into their mouth? Is this normal with this type of setup? Did I flood the coil or something? I primed it with 5 drops then let it sit for about 10-15 minutes before taking the first hit.
Will probably limit it use at the house because I don’t want to carry around so much weight in my pocket.
Hey guys. So, I'm a current pod system smoker, and I've been using a smok nord as my actual pod system, but with so many new ones on the market, I'm looking forward to acquire a new one. I've seen many reviews and lists about new pod systems and am in doubt of which one to buy. So far, my picks are the Smok Nord 2, Lost Orion Plus or Smok RP80.
I like pods with loose airflow, to make big clouds and feel the nicsalt taste. I currently use a 0.6ohm mesh coil and do like it. Just feels like it run off too quick sometimes, I might use a wrong pg/vg proportion sometimes but always try to use as close to 50/50.
Let me know your experiences and what you think!
Thanks.
This mod company claims temp control with any kind of wire ! I don't know about the rest of you but i think this would be pretty awesome if it works, what do you guys and gals think? Also it seems to monitor juice level and will flash a reminder to refill juice.
Asolo Specification:
1. The mod can support almost all tanks from 0.08ohm~2.5ohm.
Remarks:
It can support 0.05ohm but we are not recommend you to do it because it may be dangerous.
2. It is various device from 5w~200w
3. Heating coil material: KANTHAL A1, Titanium (Ti), Nickel (Ni200), other normal materials for wire
Asolo 200W_Shenzhen IJOY Technology Co.,Ltd. - Ijoy e-cigarette/Most electronic cigarette manufacturer innovation
I only have this problem with one juice flavor. It has to be the juice. Same tank and setup as all my others. I have a fresh coil and tank, load it up, and in less than a day my coil is gunked up and turns my clear juice dark brown. Is this safe to vape? It's annoying having to finish it and rinse my coil. Usually I can just fill my tank/top it off without worrying about cleaning it all. Anyone else have this issue?
I have a smok pen 22, I have been using smoozie Maui Waui e liquid. I have to either wait a while for the juice to soak every few long hits or I have to drop some juice down the top. I tried loosening the cap different amounts it doesn't seem to help, some people said it would. I'm not sure if I need to use different E-liquid like a clear one or what, but I hate having to wait in between hits especially if I already filled the vape with juice. I tried priming the coil when I first got it there was no good there.
Hey guys! I'm new here so thanks for having me! I have been vaping for 2 years now.
I am looking for a good system that can give me that throat hit and stand chain vaping at times. I had been using the Smok Nord and that was working really well, but it recently broke so I was recommended the Orion Lost Vape DNA. I prefer small mods and pens, but really need that throat hit since I started vaping once I quit cigs.
Salt Nic juices have helped a ton with that hit but with the Orion my coils are burning out in like 3 days? Lowering the wattage levels take away that throat hit, too.
What do you guys recommend?
THANK YOU!!
Yeahh,okay so I ask this seemingly often...but it happens...coil is working fine but I get little bit of juice...I can't figure out y.I'm using my subtank mini with rba nd I take the tank off the base n hit the trigger n try burning off some excess juice n it's still getting juice in mouth...What cud b the reason or reasons nd what r some ways to prevent it or stop it