Clear Something Up For Me...

Somehow, I inadvertently pushed the buttons just wrong today and it went from 7 watts (my usual power setting) to 50 watts (the highest setting). I didn't even mean to push any of those buttons.

I experienced instant burnout and a horrible taste in my mouth and the coil was instantly ruined.

Do people really vape at such high power? If so, how often do you have to replace the coil? And how many ohms are you putting that through? The coil I replaced it with is 1.77 ohms which is about the same as the one I burned out.

50 watts seems so excessive to me that I double-checked and yes, that's what it says it goes up to. Even at 7.5 watts the coils seem to burn out too fast which is why I vape at 7.

I feel like Nigel Tufnel designed this thing. "But it goes to 50. That's 43 higher than 7. So it's like 43 more. So when you're vaping at 7 watts and you want that extra push over the cliff..."

(I'm actually impressed that Nigel could do the math to figure that 50 was 43 higher than 7)  

Just got back from my local vape shop, i still ask questions 6 months into vaping. Not too mention they have various gear you can try out. So was curious what various box mods vape like compared to my Vamo 5 Nautilus/ Alantis sub ohm CF sub setups. Also got a ZNA 50 watt APV mod which i don't use much as it does drain the batteries really fast. I tend to use the ZNA 50 when my CF is on charge. I been vaping a lot on my Nautilus Vamo 5 set up a lot recently due to it being a lot kinder on my juice. Sub ohm vaping does love drinking juice like anything.

So my visit to the vape shop as made me curious about box mods in general as there some nice small compact ones out there. Was looking at box mods that can go up to 80 watts.

If and when i take the plunge as i'm just rolling it around in my mind at the moment. I'm not keen on the dripper's tanks so i would most be thinking about a box mod that i could attach a sub ohm tank on and one you could charge on it's own.


Any recommendations anyone ?

PS i love the new look of the forums! a major improvement.  

Hey guys,

I’m new to vaping. I have been a heavy 2 pack a day Marlboro light smoker for 20 years. I recently got into vaping and so far it has been an amazing journey!

I started with a small pod device (Caliburn) with 16MG nic salt. I found that I was still not able to quit smoking. I went back to my local Vape shop and got some 20mg nic salt juice, and that was too strong! It made me dizzy and confused and I just felt unwell. Even though @20mg I was getting a lot of nicotine I still wanted to smoke a cigarette.

On a whim I decided to give sub ohm vaping a try. I got myself a Lost Vape Thelema DNA 250c + a Freemax Mesh Pro 2 tank. I opted with 6MG freebase juice at 70/30. And sure enough it worked! I was able to quit smoking and have been smoke free for a week now!

My question though, is 6MG freebase nic @0.2 ohms (dual mesh), 70-80 watts too much? I feel fine for the most part and my cravings for cigarettes are under control. However from what I’ve read (and what the guy at my local Vape shop says) is that for sub ohm vaping you generally should stick to about 3mg of nicotine.

I know everyone is different, and you should do what works for you. But I’m just worried that with the large amount of Vapor I’m producing 6MG might just be a little risky.

I Vape quite a lot (200-250 puffs a day) and probably somewhere around 15-20ml of juice a day (at 0.2 ohms @ 70w the juice burns pretty quick). As mentioned above I generally feel fine. However sometimes I do feel a bit out of breath and like my chest is heavy. This could be gas (perhaps from inhaling so much air?). Or it could just be me adjusting from cigarettes to vaping. I don’t feel nauseous or have headaches.

Please let me know your opinions. Would really appreciate some advice from more experienced vapers!

Thanks!  

I read somewhere that for a pod system at 15W with a 25mg juice,the intake here is high of course.Lets say I am using sub ohm,60W@6mg,which I read that is equivalent to 6X4 compare to the pod system,so my intake of nicotine per ML is 24mg,is that true even though many people doesn’t care...  

So, I was traveling for work today, and I had to stop at a gas station to grab a drink and use the restroom. As I was checking out, I overheard one of the other customers asking the clerk if he had any vapes. The clerk told the customer they only had the Vuze e-cigs. The customer was bummed out because he had forgotten his setup on the counter of a vape shop in Sacramento, which he was sure was gone by now, saying "Those things aren't cheap," and I told them I know all about it, lol. He was waiting for some food he ordered to be ready, so I went ahead and made my purchases and went outside to take a vape break. When he came out, he lit up a cigarette, having succumb to the urge and the not having a vape. We got to talking, and he told me that he was a veteran, having been discharged after his Humvee was blown up by an IED, leaving him with a TBI - Traumatic Brain Injury. He has a hard time remembering things, and that was part of the reason he left his vape behind. He told me he was using a mechanical (I deduced that after he told me it was a metal tube with a button on the bottom) with a cheap clearo that had a very tight draw. He didn't really know much about vaping, he just knew that it had help him go a month without smoking. I showed him my setup - a Smok Xpro M80 Plus with an Artic tank using the .2 ohm coil, filled with Vape Wild's King Cake at 65/35 VG/PG 3mg nic - and he was pretty impressed. I let him try it out, and he was just blown away by it. He really enjoyed how well it hit, how much he could taste it, and how much vapor it produced, saying he could really feel the nicotine, even at 3mg. He told me a guy at the vape shop he goes to gave him a box mod, and he showed it to me, a simple unregulated box mod - an 18650 Hammond box with a missing back, no MOSFET, no nothing. I told him he should get a couple batteries and find a back to go on his box, even told him I would be on the lookout for one. I also gave him one of my drippers, a TOBH Atty clone, and told him about coil building, and how drippers work. I also gave him a couple bottles of Vape Wild's Dragon Juice 3mg, 65/35. The last nice thing I did was to tell him about this place, telling him that everyone here is more than happy to help answer any questions he might have, and to give him some advice. Anyway, just wanted to tell you guys a little about my moment of Vape It Forward tonight. Hopefully he ends up showing up here someday. Support the troops, guys and girls, they need it.  

a few little questions. I actually like dripping my 3 mg nic in max better even than vaping. I drip using 3 mg nic on a Istick 50 watt set about 23 watts with a draw of about 2.5 seconds and the coils reading says 1.6 ohms and the air holes blocked a tad on the el diablo bael. I vape on the Istick 20 watts somewhere around 7 to 8 watts on factory coil of 1.8 in a nautilaus mini
my questions: 1) does sub ohm in a rebuildable tank give flavour similar to a dripper
drippers seem to require higher watts is this in anyway suggested as less healthy ( I am not too concerned about the increased supposed formaldehyde issue I believe Dr F had issue with the research and in my opinion I probably breathe more formaldehyde off gassing wandering around carpets and insulation and pressboard)
2) the nic level is quite a bit lower in the dripper Does this actually translate to a drop in nicotine/contine levels in my blood in other words would I need to drip more to keep my nic levels somewhat reasonable re setting off " the I want a smoke brain run"
3 if I were to drip only for 3 or 4 days am I likely to find my 12 mg vape to strong

thanks for any insight you might provide  

Got kind of a strange question that I probably should be able to figure out on my own but I'm really bad at math.
What would use up the battery quicker.. a quick let's say two-second burst at 50 Watts or a 6 second press at 30 Watts? Tia.  

I find keeping the voltage at 4.2 to 5 max will give me the perfect vape.It works out too using ohms law.For ex:,if i wrap a coil at 1.5 ohm,i set the watts at 12/13 and it works out too 4.2.

If i do .20 wrap i can ''bump'' up the watts to 50 and it will still be about 5 volts with no burnt taste.

Ya cant break ohms law.  

Hello, I have been vaping for years, at 1.8 nic strength. I have some questions.

First of all I think I've made a problem by vaping on (all kangertech devices and coils), at .5 ohms, but I only vape at 20-24 watts. Is this wrong? Anything higher is way too hot, and I just don't enjoy it. I've bought a smok mag and other devices that wont fire under anything 50 watts and it was way too strong so I never use it.

Also, over the past 6 months I've developed some mouth sores I'm pretty sure it is
Tobacco Stomatitis
I know this is from vaping or smoking, the heat I guess is causing this. I've told my dr. about this he never really looked (I was in for something different than this), he replied try to vape point it downwards towards my tongue and I have been doing this for months, but to no avail with the mouth sores going away.

I can't quick vaping. I tried for a few days and I smoked more cigarettes than I ever did. It was actually hotter I noticed. I still smoke cigarettes when I drive, just a weird habit and at work on breaks. I vape all day at work when my boss isn't around.

I'm going to stick to just the unflavored e juice from now on. I'm also cutting the strength back. I also tried cutting it before with 0% percent e juice and to no avail my mouth sores are still there.

Sorry for the diatribe but I just have a few questions.



Does smoking at 22 watts and sometimes below with sub ohm coils, is this bad? I've been doing it for years now. The problem is I bought a ton and I find it hard to find coils now over 1 ohm. It seems all they sell not days is .5 coils. And I've tried nickel and and they just burn in a day, even with the settings they are supposed to be at, so I'm really at a loss as to what to do.

Also has anyone else experienced the tobacco stomatitis as I have?  

so in my pursuit of vaping above 200 Watts I made a fuse 3x24ga gauge wrapped with 36 gauge and I tried three coils. it came out .07 I Vaped it at about 375 watts it was a hot vape but the ohms were very low so I had a problem with power my DNA 250c was reporting 65 amp output so I took that and put in dual fuse 22ga gauge wrapped with 36 gauge I ran that build triple coil I used it at about 250 Watts. what I am trying to do is vape at about 300 to 400 watts with an ohm or .2 to .3. the inner diameter will be 5.5 or 5 mm I'll be using the kanthal core wrapped with 36 gauge and ni80.I'm trying to figure out what my next bill should be to try to vape above 300 watts the restrictions I have is it can't be below point 1 ohm or above .3 ohm I have two aromamizer plus has with the series deck The parallel deck a second parallel deck and a single coil deck. The single coil deck fit 6.36 mm.

I also have the aromamizer titan.

What gauge would you Clapton?

Sent from my HD1907 using Tapatalk