Hello,
I am having a leakage problem with my TFV-12 Beast King. I have been using this tank for roughly 3 years and I have never had this issue shy of leaving it in the car when I run into the store or forgetting to grab it rushing into work. I tend to stick to the same juice at large chunks at a time. I have been vaping the same brand and flavors for the past year or so. I also stick with the same coils, either the T6 or T8. I have also used the same mid for 2 years. This is not just a subtle leak either, it is dumping tanks at a time through the air vents. I have replaced the o-rings all around just in case and still no luck. As much as I hate to think like this, the leakage began around the same time of the release of the TFV16. Has anyone else noticed this issue with their V12 or have any recommendations on a proper remedy.
So I've been vaping for 2-3 years now. Mainly on a Big Baby Beast and Baby Beast. When the X Baby came out I got one but stayed with the big baby. X Baby motivated me that vaping wasn't gonna get much better than what we already had. Now after 6-9 months out of the loop, I see mesh is in. My local supply doesn't even carry X Baby coils anymore. So since I've been using the same 2 tanks for over 2 years, well it's time. I just want something better than what 2017 had to offer. I have rebuilt coils in the RTA for the Big baby. I can build basic coils. I want easy. I'm too busy to do anything past a simple mesh RTA or a new mesh sub ohm replaceable cool setup.
I like DL Vapes in the 30-50 watt range. With the Smoke stuff I've never went over 50 watts and I'm happy with that or I would need a new mod.
It would be nice to get a recommendations that the typical local supply would carry coils for
Okay, I just want to be sure about something.
If I were to, let's say. Purchase a tfv12 cloud beast king, from a cheap Chinese website with slow shipping
And vape it at 220watts.
What would the possible dangers be.
Because imo this tank seems as sturdy as an official smok one, doesn't leak, and looks official. But it's not
I just want to be sure before I blow my head off with this ....
I have been vaping for 4 years now. I am using the baby beast tank. I have 3 of them.
I have never used anything else because,, well, it works fine for me. My problem is that I am having a hard time finding coils. I used to by clone coils on ebay for dirt cheap. There are no longer any coils on ebay. I cant find any coils online. They are either out of stock; or very expensive. What do people do nowadays? Do people still use the baby beast or has everyone
changed to something cheaper/better? I always use Q2 .4 Ohm coils. I only found 1 place online that has them and they are $20 for 5 of them (including shipping). What would you guys do? I was so happy with the clone coils. They were inconsistent but cheap. Some would last 3 days and some would last 10 days; but for $1.35/each I was happy.
Thank you for any advice you can give.
MrElder
Okay, so my partner and I have used the same Aspire Triton2 tanks for about 5 years now. They were never leak proof, but lately this problem has been getting worse and I am trying to see if the market has something better to offer. Other than the leaking problems, the Triton2 has been great. Here are some desired features that I hope to find in selecting a new rig: holds at least 3ml, long lasting coils that are affordable (around $3 ea), replaceable O rings would be nice, manufacturer that is not a fly-by-night, and hopefully leak-proof. Also I should note that I currently use 0.3ohm coils @ 38w and really have no need for very high wattage vapes.
If anyone knows of some tanks that fit the description above, I would be grateful for any suggestions on what to shop for.
Thank you and have a great Thanksgiving weekend!
~Starfield~
I began vaping in 2013. It was a basic setup: Ego Twist with a couple of Vivi Nova tanks.
It took some trial and error but found a couple of juices that I liked and stuck with them. Started
at 18 mg and settled on 12 mg nicotine level. The Ego was nothing special, but it seemed to work well at the time as I quit smoking for an entire year with it. As time wore on, I began getting to get more and more burnt / dry hits. Seemed to be happening all the time. Went through countless coils and it became such an issue that I finally got tired of messing with it and quit vaping. Went back to cigarettes. Looking back, I believe I was using a High VG or possibly Max VG liquid which may have been the cause. Desperate to get off cigarettes again I tried again last year. Bought several starter kits including Innokin IO and Innokin Endura T22. Did not like either of these. Just seemed to give me a headache even after just a couple of puffs. I tried both with 12mg and 6mg. Did not notice much of a difference. I just did not get the satisfaction I remember from years earlier. So gave up on vaping again and went back to analogs.
It is now 2019 and I am really sick and tired of smoking cigarettes. I hate them but can’t stop.
Along comes the JUUL, I decided to give it a shot and just figured it would not work.
At first I did not like it. Seemed WAY to strong at 5%. Stuck with it for a week and thought - hey this is not bad. Mainly was using Virginia and every once in a while a Mango pod was nice (Maybe ½ to 1 full pod a day). I was still smoking a couple of cigs in the morning but after that I would use the JUUL the rest of the day. It was by no means great but good enough. I would constantly struggle to get a decent hit off of it though. There always seemed to be air bubbles in the pods causing a problem or I had to pull the pod out and put it back in just to get it to hit decently. Like I said just good enough. After about 6 months or I started have stomach issues. Mainly really bad gas and thought it might be due to the higher nic level in the 5% pods. So I dropped down to 3% for a month or so and noticed no difference. Finally decided to quit the JUUL altogether to see if it made any difference. Within a week everything went away and was back to normal. No more JULL for me. I am guessing something in the Nicsalts didn’t agree with me. I never had this issue with freebase nicotine.
So, am now looking for a device to replace the JULL that does not use nicsalts and was hoping to get some recommendations. I do not need a big mod device to blow clouds or anything like that.
I want something very simple that hits well and does not burn. I am open to anything really as long as it works. I do prefer MTL style and have heard good things about the Joyetech AIO as well as the SMOK infinix devices. I am really open to anything that will work well. Prefer something small, easy to use and that fits in my pocket. Also, I prefer tobacco flavors and am planning to try out the Blacknote stuff which is a 50/50 PG/VG mix so looking for a device suited to that. Any advice or recommendations would be appreciated. Thanks!
Maybe you guys can help I vape 70 VG 30 pg juice and use I believe the 0.7 nautilius coils with a aspire tank and been noticing some leakage and spitfire but have my wattage set around 10.3 and 11.3. Never had a problem before but is it possible that I bought two bad 5 pack coils and that's the reason for the leaking and suture before that I never really seemed to have a problem?
Hi all,
I have used this pipe for a long time: 5pc 1.8ml Vision V.Tox BBC Bottom Coil Changeable Tank Cartomizer
it is leaking from time to time and taste burned after about a week use.
I use this juice: 30ml Dekang E-Liquid E-Juice VG Based with 21 flavor, DeKang eLiquids
DK-4.
Can anybody recommend a new ecig for me that is not leaking, not too expensive, and just work well? I did not follow the ecig evolution this last years
If anybody have any opinions about that ejuice i use please share. (Quality?/bad for health?)
Thanks
Today I discovered one tank wasn't giving me much of a hit no matter what so, although I thought it might be too soon, I decided to replace the coil. Unfortunately before I did I had turned up my MVP 20w to about over 7 and I burned some juice?
After I replaced the coil I indeed began getting good hits again and turned down the MVP. But what can I do to avoid this in the future since some tanks cook better than others and I keep forgetting which levels I have them at.
And how do I get that burnt taste out of the tank? Thanks!
Hey - vaped for a LONG time. Mostly MTL tanks and I have been using the Zenith for a couple of years which I really like, but I'm too hard on it. I vape too much. Anyway, I've started using thicker liquids 70/30 and it's even more difficult for my Zenith. I do thin it out with a little menthol drops. But here's my question. I've been pondering going to a sub ohm tank but I just really don't know which to choose. As it stands, I'm thinking the falcon 2? Do their coils last long? Do the tanks leak even if liquid is thinned out a bit (not much). Anyway, if anyone has any recommendations, plz post reply. Thanks
I've been out of the small scene for awhile, relying solely on dripping or my latest journey...searching for the ultimate sub ohm tank.
Anyway, my wife has been dipping her toes back in the vaping waters, and I have a Tatroe Tank set up for her on a iStick 20W. The problem she's having is leakage from the coil. We've already got a number of Kanger Protank 3's in the collection...but they are prone to leaking.
What is out there now, tank wise, that offers 1.8 ohm or so range that is pyrex and doesn't leak? Pyrex or SS is a must, as she like high cinnamon juices such as High Caliber's Flame Thrower. She also vapes as if she's smoking...mouth to lung hits. She likes the tight draw that mimics a cigarette, and would rather have the smaller diameter drip tips like those on eGo and Evod style tanks