I have been vaping for 4 years now. I am using the baby beast tank. I have 3 of them.
I have never used anything else because,, well, it works fine for me. My problem is that I am having a hard time finding coils. I used to by clone coils on ebay for dirt cheap. There are no longer any coils on ebay. I cant find any coils online. They are either out of stock; or very expensive. What do people do nowadays? Do people still use the baby beast or has everyone
changed to something cheaper/better? I always use Q2 .4 Ohm coils. I only found 1 place online that has them and they are $20 for 5 of them (including shipping). What would you guys do? I was so happy with the clone coils. They were inconsistent but cheap. Some would last 3 days and some would last 10 days; but for $1.35/each I was happy.
Thank you for any advice you can give.
MrElder
So I've been vaping for 2-3 years now. Mainly on a Big Baby Beast and Baby Beast. When the X Baby came out I got one but stayed with the big baby. X Baby motivated me that vaping wasn't gonna get much better than what we already had. Now after 6-9 months out of the loop, I see mesh is in. My local supply doesn't even carry X Baby coils anymore. So since I've been using the same 2 tanks for over 2 years, well it's time. I just want something better than what 2017 had to offer. I have rebuilt coils in the RTA for the Big baby. I can build basic coils. I want easy. I'm too busy to do anything past a simple mesh RTA or a new mesh sub ohm replaceable cool setup.
I like DL Vapes in the 30-50 watt range. With the Smoke stuff I've never went over 50 watts and I'm happy with that or I would need a new mod.
It would be nice to get a recommendations that the typical local supply would carry coils for
So admittedly I dont know if this counts as m
odding when people are building actual boxes to fit atomized and house batteries from scratch but what's everyone think about this addition
its a new use for something I dont use anymore the top to the tank of my evod 2 built by aspire a just kinda screwed it into the wide gauge tip of my baby beast sub ohm tank I'm using the .15 mesh coils and tightening the draw and I find that I can get quite lot of flavorful vapor at 40 watts and 2.70v set to hard hit on my aspire skystar
Curious what anyone might think of this and if anyone maybe has some other easy DIY flavour chase inovations
Im new to external battery mods but have been vaping for 3 years and I know how to prime a coil with e-juice. I go the extra mile after I prime the coil and let it sit for a minute. Then I fill up the tank put it back together and do not touch it for at least an hour or two just to make sure. I just got my now verified as legit sigelei sobra with the moonshot 120 both of the coils from that taste like those knock off BS eBay fake coils. I started off at a very low wattage and I don't know what's wrong both coils are disgusting. It's not exactly a burnt taste or a dry taste it's like a sour off taste and I can't use them. It also makes me feel like I have something in the back of my throat. What in the heck is going on? Do these coils take awhile to become usable? They're the coils that came with the mod and I verified the mod so I assume the coils are also okay. I even went so far as to try the second coil on a different mod but with the same tank just in case the mod was frying things the very first hit. Can anyone give me an idea of what's going on so I know what I need to do and also if anyone could tell me whether or not the Cascade baby coils will fit in the moonshot 120
Hello,
After vaping (sub-ohm) quite heavily for many years, I think it's time to quit that and switch back to MTL now.
What's the best/cheap MTL tank, affordable higher stock Ohms coils that use less liquid? I'll up my nic content to 12mg.
Thank you.
Hi there,
so I got this idea to reuse coils. My coils are expensive and some people on Youtube reuse successfully because it saves money and works.
If you reuse your coils, HOW do you do it?
Can I use surgical spirit (and water later of course) to clean them?
There is a lot of stigma around buying products from China and most recently I have been asked by many vaping friends. How I get my products so cheap...simple buy direct. They didn’t quite understand as they thought the products were either fake or 2nd due to the price.
So I’ve been recommending CIGABUY company I’ve used for over a year. I really cannot falter their fast shipping to the UK ranges from 4-7days depending on local delivery etc. Some say but I need coils now! Plan ahead its much cheaper and in the long run it will save you money.
I ordered two sets of coils for £19 and when I went to a local shop they basically wanted £30, but had a back log from thier supplier, 2weeks wait! Im not trying to put custom off the local shops at all just sometimes if you cannot get hold of coils it maybe easier. And most I’ve been too have recommended wholesalers. It wont put them out of business over a couple of sets of coils as I know only 20% of people choose this option. But for the likes of people who cant afford the higher expense its a good option
Hope this helps
See link CigaBuy
And have a good look round for more options happy vaping
Hey y'all I'm wanting to try out a Zenith mtl tank to replace my egoOne v2 since I can no longer get the CLR coils and am not willing to rebuild them.
I mainly want recommendations on which online stores are the best to purchase the tank/coils from. I've been out of the loop for a few years and the store I always purchased my CLRs from doesn't carry the Zenith.
Also wondering if anyone knows if the pmta is gonna have any impact on the availability of the Zenith tanks or coils in the near future? I'd hate to try it and like it and purchase more just to find out they're extinct. I appreciate any help.
I remember seeing a few threads some time back saying that ultrasonic cleaners are awesome for almost unlimited use of stock coil heads. My question is, why hasn't this gotten more popular with the advent of expensive coils? Does it not work as well? I'm curious. I might pick one up if it's awesome for stock coils. It'll pay for itself in 2 packs of coils. Thoughts?
Okay so not sure if this is the right section or not but its the only relevant place I could find. .
My first build was okay coils turned out fine but the wicking and position of the coils where terrible. So I decided to have another go.
Opinions appreciated.
Using smok xpro m80
Plume veil v1.5 clone
26gauge kanthal
Wrapped around a 2mil precision screwdriver.
8 or 9 wraps can't remember.
And reading at .46 ohms
P.s don't know why the coils look like there glowing purple but I promise their not haha.
Hello vapers! first! I'm a noob at this stuff because I just buy my tank and use it with the coils it comes with and second, my english isnt that good but I can understand it perfectly fine.
Anyway, Ive been searching everywhere but I couldnt find a solid answer to my question.
Im using an Aerotank Giant right now with a 1.8 ohm coil, if I put a 1.2 ohm I would have to use less voltage because I get a burnt taste and the coil burns pretty quick, Im about to order a Sub ohm tank soon and I'll use the stock coils, the one im getting is the Kangertech SubOhm tank.
Why do subohm coils use more voltage when normal coils use less?
I mean, Ive seen people do things like 0.2 ohm coil @ 100W + If I did anything over 3.5V on my 1.2 ohm coil itd burn instantly... SubOhm takes more voltage the lower you go and normal dual coils take less voltage the lower you go!
1.9 Ohm Dual coil = 3.7-3.8V for me
0.5 ohm OOC subtank sub ohm coil = 12-30W?!
Thanks in advance for taking the time to reply to this post and your patience!
Cheers!
Edit: by the way, Im planning to use my subtank with a 50/50 PG/VG 16mg nicotine, Is that ok?