Hi all
I started vaping again after many years like a month ago. My set up atm is Aegis Solo (came with cerberus tank which leaked madly), currently using Aspire Tigon tank and I have an Innokin Zenith Pro which I haven't try yet.
Is taking me a while to figure out what kind of vaper I am, still not 100% sure tho, I know I prefer DL over MTL but not at high wattages because I believe the vapour becomes to warm for me. I like the Tigon tank but is a little to restricted for my liking, I will like more airflow.
Questions:
1 - Is DL at higher wattage always a warm/hot vapour?
2 - What suggestion for a more loose DL tank with vapour not to warm.
3 - Worst case scenario if the cerberus won't stop leaking (I do like the options of several coil compatibility) would the Zeus top airflow be a good option or others?
Any help will be greatly appreciated.
Hi.
I need some new batteries for my Aspire Tigon Tank. It has to be much like the Tigon battery.
Not big batteries and not small, cause i don't like heavey batteries, and it should give lots of vapour. It should be the cylinder shaped batteries.
Whats the watts on the Tigon? Is it 40? It should be the same.
And else should you notice? Do you also need to notice volt? Is does'nt need to be 1800 mah, but it should be high. Maybe least 1300.
And of course 510 connection.
Please name som models, that fit my description.
What about: Vision Spinner 2, Innokin Endura T18, Joyetech Ecxeed D19, Kangertech EVOD VV?
Hello, so i have been vaping with this new Aegis mini kit with a cerberus tank that i bought a couple of weeks ago. I have used up the 2 standard coils that were in the box, but for some reason in my country i am not able to find specific coils for aegis mini kits online (I live in Belgium). My question is if there are any other (more available) coils that i could use in my cerberus tank? I don't want to pay like $30 just to have them shipped from the UK to Belgium to be honest as they should be aroun $16 for a 5-pack. I noticed i could get "Geekvape Cerberus coils", would these fit my cerberus tank? Maybe a dumb question but you can't be sure enough.
Thank you in advance!
I just got my Aspire Atlantis in, and to be honest I'm not at all satisfied, and I can't help but wonder.... Did I get a defective unit?
I bought it and the Kanger Aerotank Turbo quad coil tank. My resistance on the Kanger is registering at 0.9ohm and I'm sending about 23watts to it. The amount of vapor is excellent, flavor is good, and it's not an overly warm vape at all.
So then I slap on my Atlantis. The 0.5ohm is registering at 0.6 (big whoop...lol) and I'm sending 28 watts to it. First, the hit is BEYOND airy. I'm on the lowest airflow setting and there's no pull required at all. I believe it isn't sealed well somewhere along the airflow adjustment, because when I blow a bit of vapor back into it as a test, it comes out of the airflow hole (obviously) but it also flows out of other areas around the airflow ring. This doesn't happen with my Aerotank Mega, Aerotank Turbo, or my Nautilus...
Furthermore, the hit itself is just BAD. The flavor is off, the vapor is WAY too warm to be enjoyable, and where as I exhale nice sized clouds using the Aerotank Turbo, I exhale pathetic small clouds that aren't even thick when I use the Atlantis. Considering its a lower ohm with more watts going to it, how is that even possible??
So, no resistance at all on the airflow, even on its smallest setting, and obviously I have to be getting air from some areas around the airflow ring. The vape itself tastes bad (not burning cotton bad, just a bad flavor), and it's VERY warm. If I try and pull on this the way I do with the Turbo (only 0.3 ohms higher), I exhale a measly small thin cloud AND I often get choked when doing so.
So I'm just curious.... Is this the way this tank hits?? I can't believe how many praise it if so, I see no appeal. So I can't help but think I must have gotten a defective tank. I've tried lowering the watts down to about 22watts just to see, and even though the vapor wasn't AS hot, it was still uncomfortably warm and did not do my liquid's flavor any justice.
Any thoughts? I really would like to hear if this is how these new sub ohm clearos are going to hit, because if so I have absolutely no interest in making the switch.
Thanks in advance,
Finch
I keep my vaping storage area pretty cool during the winter, like low 60's F. I find getting the PG ratio and wicking just right is a big headache. I've started using a desktop heater to warm up my mod and tank.
I am curious if anyone else has tried this? I find it's been a tremendous help, especially if you don't want to use high PG.
One thing I notice though is with RTAs with the tank above the build deck, if you get it too close to the heater, juice pours out the airflow, so you have to be careful with that. I think it has to do with air pressure increasing in the tank as it heats up.
Hello
I have the wotofo serpent rta top airflow single coil tank now and I just purchased the augvape druga rta. Flavor is 100% better in the augvape drugA rta but juice leaks out the bottom of the tank every time which is why I have to stay with top airflow as it never has leaked on me. So I’m looking for a top airflow rta single coil . I typically vape between 20-30watts so I don’t need a powerhouse. I just want the flavor and don’t care about clouds. Can anyone recommend the best top airflow rta? The wotofo serpent works well but it takes a hit on flavor. The serpent only has 2 small air holes around the coil area and I think this is why it isn’t producing a good vape. I was looking at the Zeus? Augvape intake of the dual one? Or any others anyone can recommend ?
primary goal: outstanding flavor
No leaking
Lots of air holes around the coil
thanks for your time
Giveaways are back, with a great chance to win from our good friends at Innokin!
As before we're lucky to have the vaping legends @Dimitris and @pbusardo on hand to answer all your questions!
Enter the giveaway simply by posting in this thread and ask Phil & Dimitris a question about the CoolFire Z80, Zenith II, MTL Vaping, or anything else vape related that you have been dying to ask or would be useful for the vaping community here at ECF.
10 winners can choose either one of two options for their prizes;
Option 1
1 pcs Coolfire Z80 kit + 1 pcs Zlide tank
Option 2
1 pcs Coolfire Z50 kit + 1 pcs Zenith II tank
Colours will be chosen at random.
But wait!! There are also 5 Extra ECF Thread Grand Prizes:
1pcs Coolfire Z80 kit + 1 pcs Zenith II tank + 1 pack of Z-Coil + 1pcs Innokin hat
The 5 Grand prize packs will be given to 5 participants who ask the best, most interesting questions below, as chosen personally by Phil and Dimitris.
Winners must be of legal vaping age, only one prize per person, and this giveaway will run from July 9th to 15th.
Good luck & thank you for your support!
So....been vaping for 6 years.
For the last couple years I was using a Reo with an RBA at .5 ohms and was going through about 12-15ml a day. A friend of mine let me try his sub ohm tank a few weeks ago and I was hooked! The flavor was better than my Reo/RBA setup and the vapor was OMG.
Anyways, I've since bought a couple of sub ohm tanks with an IPV2 Mini, then graduated to a Goliath RTA with an SX Mini M Class. Using the Goliath with a .44 ohm dual coil at 30 watts on the SXM and I'm going through anywhere from 25-35ml a day! This just seem excessive....
Can anyone recommend an RTA that would use less juice but still give me a lot of airflow and flavor? I'm not all about the vapor, although I do enjoy it.
I'm guessing that if you want lots of airflow (I'm a direct lung inhale kinda guy) and a warm, full vape you pretty much have to vape at higher wattages/lower ohms and therefore use excessive amounts of juice...just wondering if anyone else has had a similar experience and has successfully cut down their juice consumption.
FYI, I DIY my juice so cost is not really an issue...I'm a bit concerned that using this much juice every day just can't be good for you.
Hello everyone!
I have been an happy vaper now for 5 years. Like most of the old beginners I started with cartridges, blue foam, cartomizer and so on. Currently I am using Kanger tanks, T3, Evod 2, MiniProtank and Aspire ET-S BVC, with Vision Spinner VV but I am looking for an upgrade.
I am not looking for an RDA, nor big battery and definitively not sub-ohms. I'm looking more for a glass tank, adjustable airflow, large capacity, and the ability to see the liquid.
Thank you you all so much for any advice, and happy vaping!
Hello, I have a question about some coils i had laying around from my previous vape.
Can i put my old V8 BABY-Q2 (O.6 Ohm) in my new aegis mini cerberus tank or would this cause problems?
Thanks in advance.
Hello, Could someone tell me what is a good wattage setting to use on this mod for a beginner I am just starting out?? I will be using e liquid 18mg freebase non salt for starters myself, I prefer tobacco flavor am not a fan of fruit flavors myself. I am presently a heavy smoker. Thank You