Rip Coolfire Iv Tc. Suggestions For A Replacement Please

Giveaways are back, with a great chance to win from our good friends at Innokin!

As before we're lucky to have the vaping legends @Dimitris and @pbusardo on hand to answer all your questions!

Enter the giveaway simply by posting in this thread and ask Phil & Dimitris a question about the CoolFire Z80, Zenith II, MTL Vaping, or anything else vape related that you have been dying to ask or would be useful for the vaping community here at ECF.

10 winners can choose either one of two options for their prizes;

Option 1
1 pcs Coolfire Z80 kit + 1 pcs Zlide tank

Option 2
1 pcs Coolfire Z50 kit + 1 pcs Zenith II tank

Colours will be chosen at random.

But wait!! There are also 5 Extra ECF Thread Grand Prizes:

1pcs Coolfire Z80 kit + 1 pcs Zenith II tank + 1 pack of Z-Coil + 1pcs Innokin hat

The 5 Grand prize packs will be given to 5 participants who ask the best, most interesting questions below, as chosen personally by Phil and Dimitris.

Winners must be of legal vaping age, only one prize per person, and this giveaway will run from July 9th to 15th.

Good luck & thank you for your support!

 

Yup. I got me a caliburn. I cannot belieive the flavour and warmth of vapour with the 1.2 ohm coils. I gave my Coolfire 4 TC100 away to a friend and both my cleito tanks.

12mg nic salts, 50pg/50vg and amazing.

My set up has gone from big to tiny and the salts are so satisfying compared to normal eliquid that I don't need to DL anymore.

Amazed at the performance from these tiny modern pod devices better than a nautilus mini by miles.  

Hello Been vaping about 2 years now
My setups are Vaporshark Rdna 30 Istick 30 watt and a provari 2.5 and a IPv mini v2 30 watt
So like many others I have been juggling with wattage I currently Use A couple of kanger subtank minis using the RBA and a kayfun v4 I've been all over the place building ohms but have settled on 1.2 - 1.4 ohms BTW I'm not into sub ohms
So after many months of different ohms and watts with the help of steam engine I have found I like my vape at a heat flux of around 175 so to get to this and I can't believe how simple it was I just take the ohms I am using such as 1.2 @ 12 watts = 178 heat flux 1.3 @ 13 watts = 178 heat flux and so on I can't believe it became that simple
So I suppose all it takes is to find what heat flux you enjoy and adjust from there
I never bought that what I have read thru the last 2 years that 14 watts is 14 watts no matter what ohms you use it seems to me there had to be more factors involved
Just my thoughts


Sent from my iPhone using Tapatalk  

Maybe this isn't the right thread so I apologize if it isn't. I've been using Vision Spinners for the past six years. Yep. Six years off cigarettes. I can't find Vapros Spinners anymore and am looking for a replacement. I like the pen style batteries and have tried a couple of replacements: The Aspire CF and EVOD. Not cutting it for me. Just not getting that throat hit.

Yeah, I'm old school but I like the feel of the pen style in my hand. Any suggestions? Money isn't a factor.  

The coolfire z50 kit is the vape device that helped me quit smoking and start vaping one year and one month ago...it was a good choice cause I had no problems on my first vaping steps making the transition pleasant...

The z80 kit seems an impoved version in every way from the great z50 kit in my opinion...

Removable battery is always good to have....bigger size make it better to hold in the hand...very lightweight but also feels sturdy....great machining always from innokin and buttery smooth threads on the battery cap...

I still don't know if the Fourier vape tech with the new board can improve the coil life or the refresh makes any difference but I always like to see innovation and the mod performs very good that's for sur....the z coils already for me are great coils and very long lasting anyways ..

I also saw the 0.8ohm coil has bigger juice holes now!!!! I don't know since when this happend cause i have a stock of older coils and I also rebuild them...

I always thought the juice holes were kinda small for the 0.8ohm coil and sometimes on colder temps it couldn't keep up to wick 70vg juices in my opinion if u chain vape
I am very happy innokin doesn't settle and still making improvements and fine-tune their coils even tho they are so successful...

The zenith 2 is an improved zlide tank in my opinion maybe they chose to name it zenith caus the old zenith is a legend hahahaha
In fact is so similar u can swap the bottom airflows from the zenith 2 to the zlide if u wanted

its same dimensions as the zlide if u don't count the curves on the airflow ring and topcap,those curves btw make it look soooooo good

....it has wider chimney inner diameter that helps for direct lung vaping and it's not much bigger to affect the mouth to lung flavour in my opinion.....

it also comes with larger juice capacity cause the twist topfill mechanism that borrowed from the zenith takes less space and makes the tank be able to hold more juice than the zlide on same dimentions oh yeahhh....

the new airflow system is perfect....with small holes to be able to fine tune mouth to lung from tight to airy and a big slot to wide open and vape direct lung...

In my opinion is not just restricted cause it can be almost as airy as for example the hellvape destiny rta that is single coil direct lung rta.... The zenity 2 can supply the 0.3ohm z coil with all the air it needs and Vapes great...something that the zlide couldn't keep up...

 

My Vape Connexx 150w mod finally died on me after countless chip errors and the buttons caving in on themselves. This is the third mod I've had break on me, so that's why I'm asking you all for suggestions. My max price is $90/USD (that's the refund I'll be getting for my mod). Now I usually vaped around 40-60 watts, builds about .2ohms-.9ohms and what have you. I like the looks of something hefty and bulky, sleek and modern/futuristic or wood mod. I'd prefer something that will fire down to .1ohms, interchangeable batteries (HATE fixed batteries), 50-260 watts and RELIABLE. I'm tired of them breaking on me, so I'd prefer y'all give further suggestion due to my bad luck with mods, but with the information given, what could y'all suggest? I'd appreciate anything.

Side note: I'd rather not order from Fasttech or something like that, making me wait a month until my mod gets here.  

Hey guys looking for a tank that will last me long. As we all know CE4's aren't the best mine died pretty quickly. Looking for a tank that will last me long, and wouldn't need replacement coils very often. Also hoping these tanks are glass so they don't break with certain juice. I was thinking the evod glass 2 or the aspire k1. Any ideas? And will these tanks fit on my battery?

Zen Pen Electronic Cigarette Kit  

So I'm looking into buying a temp controlled mod for my next purchase. Ideally, I would be getting the VaporFlask with the DNA40 board. Problem is, I dont have $300 usd to drop on it. Sooo....

I was thinking about the FT clone, and was about 3 clicks away from making the purchase when a friend tells me about the IPV4 pre-order over on the bay. The DNA40 has temp control and goes up to 40 watts (duh) but from what I have read, the IPV4 also has temp control and goes up to 100 watts. I'll never use all 100 watts BUT sometimes will vape above 40 watts. I like that both are dual 18650 and have the temp control function (I'm dying to play with some nickel wire) I'd really like some opinions

Any thoughts on the VaporFlask clones from FT? Would it be worth it for me to wait for the IPV4?

Cheers ECF!  

I have been out of the game for a while and have just been using old mods/RTA's.

I am looking for suggestions on some of the best up to date mods as well as some of the best RTA that go with the mods.

Here is a little info...I usually vape at around 30-35 watts...

For the mod, I am looking for one that takes a single 1865 battery, is small in size, and is lightweight.

For the RTA, I am looking for a single coil DL tank....one that can hold at least 5ml of juice, can go with the mod suggested, and provides great flavor.

Can you guys please give me some suggestions? Thanks a lot  

Hi, I am a mouth to lung vapor (just like smoking a cigarette). I use the Innokin Kroma A mod with the Zenith Tank. I use a 1.6 ohm coil at 9.5 watts. I know that there are better set-ups for me and am looking for suggestions. I am not a cloud chaser but just want good flavor and a coil that lasts. I don't know if I vape too much but I have totally lost the taste, I use Red Drop from Mountain Oak Vapors. I have always been weary of vaping at high wattages but don't know much about it. Please help!!! Thanks. Mark