Burn Coil

I've got one that has me puzzled. I went through two fills of my Aerotank V2 with Cosmic Fog's Milk and Honey when it started to taste burnt. I figured no big deal, let me change the coil and clean the tank and all will be well. Well, new coil and cleaned tank and about 4 drags in it tastes burnt again. Thinking maybe I have a bum coil I try another one. Same deal.
I'm at a loss. It's the same bottle of liquid, same tank (cleaned each time), same battery (iStick 50w), same wattage (8.9), same resistance (1.2 ohm). Anyone have any clue what's could be causing this? It's getting expensive in coils and liquid!

Thanks  

I'm having trouble with my Jem Pen E cig - hopefully someone can help me.

I take the coil out clean the tank and battery area, put it back in with liquid + prime the coil. for about 5 minutes it tastes fine and is vaping as normal. then a really horrible burnt taste comes in which is unbearable to smoke and making my throat hurt.

I take the coil out and clean again, put more liquid. the same thing happens! it tastes absolutely fine again and then gets burnt.
any idea why this is happening ? the device gets quite hot too...
i don't think the coil is the issue because why does it taste fine for a few mins?
I've ordered new coils so going to try that but worried its the device. i've only had it for 2 weeks and changed the coil about 5 days ago.  

Think i might of burnt out a Alantis coil yesterday, still not sure. I stuck my tank in cup of hot water for 20 mins with 1 or 2 drops of washing up liquid. Then i dried burn the coil.

When assembling my tank and topping up with new juice i got a horrible burnt taste so i just swapped it out and put a new coil in. At the moment i only got 1 sub ohm tank and i i got a selection of juices. I do intend to get another sub set up waiting on ZNA 50 as i type this. But this going to take time as i went for the cheapest option ie Fast Tech.

Does anyone know how long the coils for Alantis tanks are suppose to last ? and the best way to keep them clean when swapping out juices ?

Any advice would be really helpful.  

my tank's been on a leak streak. relatively new and still on first coil. haven't bought back ups yet, since i'm not sure it's a keeper.

I had to chain at high wattage (for coil) to get the gurgling to stop. might;ve burnt it. no dry hits thus far_ well kind of one... but mainly been bitter after today's fiasco.. i did fire it without inhaling a bit too.

the only discernible thing is a bitter taste sticking. is that an indicator of coil being burnt (didn't happen on my gear)?  

okay, so i had a problem yesterday where i would keep getting juice popping up on the draw, that problem is solved, however, now on only the second day of light use, on the 1.2 ohm coil that came with the tank i am getting a pretty harsh smokey taste. Its not overwhelming like it is when a coil is burnt out, just an unpleasant taste. I did 4 drops of liquid on the coil before using, everything is screwed in tight. Do i need maybe a couple more drops on the coil?

FYI: using an istick 30w burning at about 14.5-15w  

Today I discovered one tank wasn't giving me much of a hit no matter what so, although I thought it might be too soon, I decided to replace the coil. Unfortunately before I did I had turned up my MVP 20w to about over 7 and I burned some juice?

After I replaced the coil I indeed began getting good hits again and turned down the MVP. But what can I do to avoid this in the future since some tanks cook better than others and I keep forgetting which levels I have them at.

And how do I get that burnt taste out of the tank? Thanks!  

Hello vapers! first! I'm a noob at this stuff because I just buy my tank and use it with the coils it comes with and second, my english isnt that good but I can understand it perfectly fine.

Anyway, Ive been searching everywhere but I couldnt find a solid answer to my question.
Im using an Aerotank Giant right now with a 1.8 ohm coil, if I put a 1.2 ohm I would have to use less voltage because I get a burnt taste and the coil burns pretty quick, Im about to order a Sub ohm tank soon and I'll use the stock coils, the one im getting is the Kangertech SubOhm tank.
Why do subohm coils use more voltage when normal coils use less?

I mean, Ive seen people do things like 0.2 ohm coil @ 100W + If I did anything over 3.5V on my 1.2 ohm coil itd burn instantly... SubOhm takes more voltage the lower you go and normal dual coils take less voltage the lower you go!

1.9 Ohm Dual coil = 3.7-3.8V for me
0.5 ohm OOC subtank sub ohm coil = 12-30W?!

Thanks in advance for taking the time to reply to this post and your patience!

Cheers!

Edit: by the way, Im planning to use my subtank with a 50/50 PG/VG 16mg nicotine, Is that ok?  

I've got a Nautilus with a 1.6ohm coil, and an iStick 50w. On the side of the coil it says 3.2v-5v, and I want to know if that's just a guideline or a limit for the coil.

I'm running it at 4.8 volts, but I get better flavor and vapor at 5.5 volts. There are no wicking issues or burnt taste at 5.5v, but I don't want to damage the battery or the coil. Any advise would be great thanks!  

Im new to external battery mods but have been vaping for 3 years and I know how to prime a coil with e-juice. I go the extra mile after I prime the coil and let it sit for a minute. Then I fill up the tank put it back together and do not touch it for at least an hour or two just to make sure. I just got my now verified as legit sigelei sobra with the moonshot 120 both of the coils from that taste like those knock off BS eBay fake coils. I started off at a very low wattage and I don't know what's wrong both coils are disgusting. It's not exactly a burnt taste or a dry taste it's like a sour off taste and I can't use them. It also makes me feel like I have something in the back of my throat. What in the heck is going on? Do these coils take awhile to become usable? They're the coils that came with the mod and I verified the mod so I assume the coils are also okay. I even went so far as to try the second coil on a different mod but with the same tank just in case the mod was frying things the very first hit. Can anyone give me an idea of what's going on so I know what I need to do and also if anyone could tell me whether or not the Cascade baby coils will fit in the moonshot 120  

Hello just received new spinner 2 battery. I think I am burning my coil now it taste burnt. I have used spinner 2 for years no problems. This new version has more power has anyone experienced same issue. Do we just lower the voltage ? Or are better tanks needed or different
ohm coils? Thank you in advance for any help or opinions