Rincoe Manto Aio Help

Hey guys,

I finally updated my charger a few days ago (I think before I had the VP2) or something like that. Quick question on something I'm noticing that seems a bit odd to me.

When I charge (for example 18650's), a battery that's fully charged in channel 1...it flashes FULL/0.00 mA, I remove the battery. A few minutes later, I'll put the battery back in the same bay, and all of a sudden there are a few hundred mA's that show up on the screen that need to be charged back into the battery and it takes a few minutes for channel 1 to recognize the battery is fully charged and flash FULL/0.00mA again (although it does show above that's fully charged at 4.2v).

If I take that same battery and do the same test but this time in channel 2, within a few seconds it recognizes that the battery is fully charged and flashes FULL/0.00mA. So it seems channel 1 is not working as well as channel 2 is, when it comes to recognizing information from the battery.

Is this normal for this charger or do I have a defective charger?  

I got a problem with my Luxotic Surface. I'm using a LG Choco Battery 18650, it was fully charged and when I press the fire button suddenly it appears for Battery Low even the battery was on fully charged. I tried my spare battery maybe its just a mistake putting a fully charge battery, but it was the same issue also with the spare battery. I tried the 2 batteries with my Geek Vape Aegis 100W to check whether my batteries are already broke but it works fine. I was vaping for my Luxotic Surface by 55.0 Wattage, 0.21 ohms, 3.40 Voltage. Can someone help me out to fix this problem?  

I bought my Sigelei 100w Plus a few days back and ordered 2 Sony VTC4's on my same order (I'm confident they're legitimate, I've bought some before) to be able to marry them together and use them with my Sigelei. Upon receiving the batteries, I labelled one A, and one B and put them into my charger at the same time (charger was off, put both in and turned it on), one battery is slightly more charged than the other (it's 2/3 bars, while the other is still 1/3). I'm a bit worried about using married batteries, I understand rotating A and B in my Sigelei and charger but will they be the same charge when they're done? They're new batteries and they both went on at the same time yet one of them is charging a little bit faster.

When both of the batteries are fully charged, will they be safe to use and cycle accordingly? I heard about if one battery has even a tiny bit less, the batteries will take an uneven load and it will make it risky. How do I ensure that these batteries remain married?  

Now that I have gotten into unregulated mods I've been doing a lot of reading about batteries... well actually I had started reading before but now that I am actually using them I want to know more.

One thing I am a little puzzled about is that you should recharge a battery when it's about 2/3 discharged and you should never charge a battery that is completely discharged. My questions:

1. How do I know the level of discharge in my battery? - I don't own a multi meter
2. What do you do with a fully discharged battery? - just chuck it?  

Hi,

I bought a new vape cartridge but it won’t work with the battery I have. The battery is charged and just flashes blue when it’s screwed in and pressed.

Do I need to buy a new battery?
Any info would be awesome. You can see the battery and cartridge in the photos.  

I have decided to keep one of my mods with the battery removed in a spare purse. I had the bright idea that I'd keep 2 batteries charged in a plastic case. This way if I switch purses, I do not have to worry about forgetting my mod and, if I do, I will have a spare one.


So --- approximately how long will the batteries (21700) stay charged without being used?  

So I just received a 100w seigei box mod and I fully charged my 2 18650 batterys that worked fine in my mech mod. When I put them both in my sigelei the battery percentage only tops out at around 50% charged?!!! Like what they are for sure both fully charged. Anyone know what the problem is?  

I have an orbit cannon vape pen. I believe it's 510 style.

I bought it 5 months ago. I just got around to using it. You press the button 5 times, and it turns on, press it 5 more times and it shuts off. The light also indicates the battery voltage. It turns white when fully charged, and then blue, and then red when it's almost dead. There is also a light on the charger that is red while it's charging and then it's supposed to turn green when it's done charging.

Well, the e cig battery light stays white for a short while, and then turns blue. It used to stay white longer. It's like after a short bit of usage, it goes blue. The red light on the charger also never turns green no matter how long it stays plugged in.

The e cig stayed in the box, and the battery was depleted. I picked it up a few days ago and put it on the charger to start using it and noticed this.

Does it sound like the battery is messed up? Last night I charged it 3 hours and the red light on the charger never turned green so I unplugged it. The light on the battery was white. Today I went to use it, and the light was blue - I never used it and the e cig itself was turned off.  

I was vaping on my subtank mini on top of a cana clone and it was working fine until the screen started glitching. It would only show like half the screen or the screen would be all jumbled up and it wouldn't fix until I turned it on and off a couple times. I took out the battery and let it sit overnight and when I popped in a new battery today the screen isn't lighting up at all, also its firing a lot weaker, and randomly locking itself. What can I do?  

Herro!

So, I always used to use mech mods from about 6 months to a year and a half into vaping. For the last 6 months I've been on regulated (iStick 30W and 50W).

When I switched to regulated I retired my mech mods and 18650 batteries to the closet. I made sure they were all around 50% charged because I heard from someone on here that was the best condition to leave them.

Well recently I've had this curiosity to try them again, only for at home use, mainly for the novelty of it.

So, my question is, what will I have to do to revive these batteries? Are they safe to just throw back on the charger and use when fully charged? Or are they not safe to use?

Batteries: 4 Sony VTC 4's (all were acquired about a month before I stopped using mechs), 2 XTAR (Sony) VTC 4's (about a year old now) , 2 MXJO 2500mah (20A LG's) (about a year old now).

Let me know! Thank you!

Vape Happy,
Cullin Kin