Triple Vs Quad Coil For Valerian 2 Tank

I just got a Delta II tank as an entree to sub ohming after a disastrous adventure with a MELO. Strangely enough, though, while blowing an occasional cloud at 30 watts is fun, I find I also like running it with the air flow pretty restricted on the tank and at 14-16 watts on the regulated mod and taking mouth hits. Really nice flavor and "just right" (to me) vapor production.

Is running a sub-ohm coil at low wattage potentially causing any damage to my mod (iStick 30w) or my tank?  

I have the Istick 50 with a Nautilus tank. 1.7 ohm coil. What would be the highest watt useage recommend for this set up? I read the user manual for the tank and didn't see a max safe watt. I don't want a melt down. I did however notice that once I get above 18 or 19 watts the flavor of the juice starts to diminish. is this something that could be rectified with a different type of coil in the tank that would allow for higher wattage and give a better taste. Or a different mix of juice?  

Hello
I have the wotofo serpent rta top airflow single coil tank now and I just purchased the augvape druga rta. Flavor is 100% better in the augvape drugA rta but juice leaks out the bottom of the tank every time which is why I have to stay with top airflow as it never has leaked on me. So I’m looking for a top airflow rta single coil . I typically vape between 20-30watts so I don’t need a powerhouse. I just want the flavor and don’t care about clouds. Can anyone recommend the best top airflow rta? The wotofo serpent works well but it takes a hit on flavor. The serpent only has 2 small air holes around the coil area and I think this is why it isn’t producing a good vape. I was looking at the Zeus? Augvape intake of the dual one? Or any others anyone can recommend ?

primary goal: outstanding flavor
No leaking
Lots of air holes around the coil


thanks for your time  

So I decided to get another clearomizer and the Donner by Amigo Itsuwa is what I got to replace my Aspire Atlantis.....
So here are my thoughts on it and it's just My Opinion:

Holds 4mls of juice - holds more juice so I'm not refilling my tank 2-3 times a day
.50hm Coil head is cotton & Kanthal wire & a wire mesh around the opening for better wicking ( You can use Atlantis coil in this thing and it's better in this tank then it is in the Atlantis) It comes with 2.
There's no notches or trying to center the coil head. It sits in the Clearo and just sucks juice lol
Great Flavor sub-ohm - The flavor you get from this is amazing, I was a little taken back bc I chose a sour raspberry and it really was more sour tasting then in any of the other tanks I had the same juice in
I personally like the drip tip but it's not for everybody
Adjustable air flow control is a wide slot - It's a slide around, but the draw from almost closed to full open is nice any way you wanna vape.
Vape production is great I use 10/90vg - 20/80vg


There are some things I don't like about this tank...
Priming the coil is a process - on a fresh coil the directions state to drop a few drops onto the coil, then once tank is filled let sit for 1-2 minutes prior to use. On your second fill of the clearo you have to let the coil sit for 2 minutes b4 use....I kinda wanna fill and vape, not fill and wait
Holding 4mls of juice is great, but if you can't vape 1ml of juice at the bottom of your tank it sucks. You can't vape the last ml of juice because the coil head sits to high so it can't wick the remaining juice.
I did find that when I put the Atlantis coil head in that the wicking was alot better then the coils that it came with, now this could be bc I am using a high vg juice.

So let's talk price....I bought this at a B&M so I paid A LOT more then what I've found online.
My price was $45.00
I have found these online for as little as $23.00
and for this price I would probably buy it again, not for $45.00
Iv'e been vaping on this for about a week now, I've gone through 2 coil heads in 4 days & now put the Atlantis coil head in it and am having better luck with it.
So there's my thoughts on my new clearomizer.  

I only have this problem with one juice flavor. It has to be the juice. Same tank and setup as all my others. I have a fresh coil and tank, load it up, and in less than a day my coil is gunked up and turns my clear juice dark brown. Is this safe to vape? It's annoying having to finish it and rinse my coil. Usually I can just fill my tank/top it off without worrying about cleaning it all. Anyone else have this issue?  

I make the choice that I'm certain I'll be vaping forever. I figured since I enjoy it, I'm gonna learn everything I want to know and make it a hobby.
Me being a perfectionist, I decided it was time to piece together a setup that was not only powerful, but pleasing to the eyes.
After much consideration, I made the choice to not go sub ohm. I instead decided a higher power, higher ohm setup would please me.
So this is what I ended up with.
Aspire CF VV 1600MAH battery. Instead of rocking a VV+ most people use, I went the route I did to get 600 more MAH battery and didn't care about the beauty ring because after all, my Aspire K1 tank is a backup now and can't be used with the VV+
The tank had to be good too. This was where I wanted to upgrade the most. I wanted adjustable airflow, and better coils.
The Nautilus Mini was the only clear choice. 2ml is fine for me as I switch flavors now and then, and the new redesigned OCC coils you can purchase was a selling point.
I've been using the setup since last night, and WOW!!! This tank brings the flavor through in ways I never thought possible. Also, the vapor production is amazing to me. I don't care about cloud chasing so by my standards this is a fog machine at higher voltage lol.
Overall with 5 additional spare coils I'm about 65$ in this setup and that's a bargain. It performs so well.
Also wanna throw out that GWAR Spew from MBV is friggin amazing in this tank!!!!  

Wanting to take a poll or get some feedback on what some of you all think about RTA's. I have had the Profile Unity mesh rta for several weeks and other than getting the build right its freaking fantastic. I also have the Cleito 120, Crown IV, Falcon King which the M1 Coil to me is the best coil for Falcon, but the RTA is by far has the best flavor at of all of my tanks. I am thinking about buying another one and the one that is catching my eye is the vandy vape Kylin 24 mm. Anyone have it or think there is something out there with better flavor. I have stayed away from RDA's due to I do not care for hot vape. A friend has told me if I do try an RDA to go with the Profile Unity Mr Right RDA or Apocalypse RDA 25mm by Immortal Mod.. Biggest issue is I travel a lot and not sure I really need to be messing with RDA. ..

Thanks for all the feedback on last thread  

I'm finding a 1.3 ohm coil to be to low for me. On my Provari, between 2.9 and 3.5 volts are OK. I haven't used this tank on either of my other two variable wattage regs, but I'd think it to be in the 6 - 7 watt range. It's time to re-wick the other tank or quit typing and do it already. I think I'd go for the former, but then I'd have to think about that. The other tank's coil I wrapped to about 1.7 ohms. My mech and me would be ever so gladder if that tank was fully operational again.  

Hey guys, I just need your opinion. I been dripping with my Plum Veil and Smok-e mod and i just find it inconvenient to drip while at work. So i wanted to use a tank with my mechanical mod. I went to a shop and they sold me a Herakles tank that came with a .6 oHm and .2 oHm coil and a MXJO battery. They recommend me to use the .2 ohm coil for better result. Will that be safe to run .2 ohm with this battery?

Battery specs : 3.7V 2500mah 35A.  

I was borrowing my bro's Atlantis, for awhile. I put a new coil in it, a couple days before I returned it. It was hitting great. When I give it back, we dump the juice back in a bottle and put the tank back in its original box. About a week later, he sells it to my brother in law. Here's the weird part - we fill up the tank, assuming the coil needs no priming, and fire it up. It seems to be weak on vapor production. It has the nice crackle/pop, and there is no burnt taste or dry hits, but it just isn't producing the volume it used to.

Is this because it sat for a week?