I busted my tank and my local store didn’t have another so I just decided to buy a whole new head/tank to go on my SMOK morph 219 mod. I asked the store clerk several times before I made the purchase if the tank I’m buying is compatible with my mod. He insisted it would work. Well now when I get it home and try to use my new tank on my mod (SMOK morph 219) it keeps asking if it’s a new coil with a different size every time. Any advice? And no I didn’t forget.... the new tank is a vaporesso cascade tank 7ml. 60.5X25MM 81g.
Hello all,
I’m sure this has been discussed before as this is not a new tank, but after doing a search I didn’t find an answer. I also didn’t find much help on YouTube. I just pulled out my 2k18 doggystyle (I think that’s the correct version, it is a top fill) and built and wicked it. It has been so long since I bought this and read up on it, I don’t remember any of the tips and tricks.
As soon as I adjusted the airflow, ejuice started leaking in large amounts out of the holes. Luckily I was able to salvage most of the juice as it was premium juice I just bought from a store (not diy). What did I do wrong? Is it a wicking issue or is something else wrong? Any suggestions are greatly appreciated! Sorry if this has been covered before, but didn’t know where else to ask and I want to get this tank to work.
Hey guys,I am staying in Malaysia and I find the difference between online store and retail store is that all the retail store in my country doesn’t stock in sub ohm tank,they only sell Rebuildable tank.I traveled to Philippine and their retail store is the same as Malaysia.If your getting a sub ohm tank in both this country,I find that it’s a lot easier to buy online
So while home sick (yes I was actually sick) today, several reviews sold me on the SMOK TCT pro as THE tank for my IPv4. I was looking for a high watt tank that could also make use of temp control. Didn't want another Atlantis and the Kanger subtank is good but it's just not quite enough for me in temp control mode. Anyone have any experience with the SMOK TCT or VCT pro tanks? Please share!
Calculated I spent 104USD on average for this three month,it’s some money due to me buying all the necessary mod and pod plus juice.
If my mod did not gave up on me I would spend 55USD on average per month,while using drop in coil which I am very happy about it...How much did you spent on vaping stuff and how much on average would you spent if you didn’t had to chip in on devices.
I didn’t do rta/rda because I had many working hours and I tried one rta,it’s just a hassle changing the cotton or coil and I am a lousy builder hence I use sub ohm tank
I just got married and I had a job as retail salesperson inside a air conditioned shop.Now I am still quarentined overseas so I don’t know how will be the situation when I returned.I am a closet vaper,i recently invested on two mod,tank and many sub ohm coil,if I don’t use them I felt like I wasted and I don’t want to go through the trouble of selling them and lost money.I can sense that when I vape nic salt on a pod,my wife didn’t really complain and I myself felt more comfortable vaping it...whenever my wife walk out of the room,I would be chain vaping my sub ohm set up.I really hope I can use my mod and tank when all this f**king Conora virus is ok.Anyone can advise on my situation,or anyone here can sort of relate to me somehow?
Thanks for reading!
Hello I have had this smok g-priv 2 mod for ages now. Now for some reason when I press the trigger button while a tank is on the mod just shuts itself down. I have tried cleaning the 510 connector, tried using 3 different tanks, charging the batteries, etc still no luck. It started happening all of a sudden after I refilled the tank. I can click the trigger while no tank is in and no issues but if a tank in connected is shuts itself down. Any ideas?
Here is a video:
OK so I have a Vaporesso Veco Solo Kit and my tank is stuck. I've tried rubber gloves, rubber and pliers, lock pliers and anything else you can think of. The tank won't budge. I need to change my coil but how can I get this damn tank off.
Not the best picture but you can see the tank.
UPDATE: After continuous trying with multiple methods, my glass has decided to give up and is now in 4 pieces so I need either a new glass or new vape entirely.
Hi! so i broke my tank glass and i need to replace it asap,the thing is the exact same glass for this tank is hard to find, is there any other compatible glasses for this tank?
So I ran into a good guy I hadn’t seen for a long time who vapes DL. He’d recently busted his main vape and had picked up a SMOK as a quick emergency backup.
I suggested an ageis legend and a Doom atty to him, but he wants light weight, which is a specialty of neither of those devices. He can wrap and wick an RTA, has a lot of kanthal to use up, and wants a tank bigger than 3ml. The more the merrier I suspect. His batteries also suck.
So if it would please the participants, I’m looking for suggestions.
Mod:
- light weight. Small would be nice to
- reasonably high quality. He doesn’t need ruggedized necessarily but he wants it to last.
- Low cost (he’s willing to work with Chinese no-names and to shop China channel. He likes Ali-express)
- 2x18650, though I suspect a 1x2x700 would also suffice. He vapes DL so a certain amount of power is needed
- No Blinky Lights (this one is absolutely non negotiable)
Atty:
- DL
- Doesn’t leak (yeah I know. Anything will leak.)
- Capacity over 3ml
I’d personally like to add no paint or gold electroplating over pit metal. He didn’t ask but they suck bad.
Gonna mail him a link to this thread.
UPDATE:
Dude is an old ECF member and his account still works!
The person I was asking for is @rigorist
He will have more accurate data than me.
I’m a long time vaper. I have been vaping 83/27 PG/VG juice with 12-16 mg nic. I use an avacado tank with dual Clapton coils at .3 ohms and around 50-60 watts. With this config I can get my most desirable lung hit but only with certain juices and I tend to chain vape. Whenever the shop is out of my regular juice I’m always Leary picking something new because a lot of times even at the same nic level I don’t get the satisfying lung hit I crave and end up with a sore throat from hitting it so often. Soo... I moved to Hawaii and my system is all screwed up. The juices here are all 50/50 so super watery, the juice is also double the price, I burn through it twice as fast, the lung hit is barely there, and it pops and crackles really loud which drives my wife nuts and has cuased many arguments about my “stupid crack pipe”. So in an effort to make my wife happier, spend less money, and maybe vape less I decided to venture into the salts realm.
I started with a geek bar to test the waters and lung hit was phenomenal! But at $20 a pop and only lasting a day that just wasn’t going to work. So after much research I just picked up a SMOK NORD 2 and some 48mg juice. I set it for 50 watts and took my first drag. Good god almighty! One hit and I caught a buzz. I have NEVER caught a buzz from a vape before. After some messing around I dialed it down to 25 watts and so far seems like the sweet spot and I don’t have the urge to chain vape... so success? I don’t know yet? It’s for sure a lot quieter and 1/4 the size of my tank MOD. Does going from chain vaping 16mg to 48 salt nic seem excessive or about right? I may try the 24mg juice when this one is out but any other suggestions? I’m a little worried I’m going to give myself nic poisoning after that first drag lol