Mtl Drip Tip Keeps Clogging Up And Juice In Mouth

Hey there guys, new here.

I have a Vappresso Revenger Mini kit and I have upgraded my tank from NRG SE Mini tank to a "Geekvape Z Sub Ohm tank(Much Larger Tank)". Because I wanted to taste more flavor and still blow lots of clouds in the air with my vaping device being fairly cheap.
I put a New Geekvape Z series coil 0.4ohm 50-60W because I burnt my original 0.2 Ohm coil , I wont talk about my previous coil. I'm getting 2 problems here.

1. I'm using 60W, normal setting and every time I vape or inhale I get a taste of E-Liquid in my mouth. However its blowing perfect clouds and still getting an amazing taste but its just that the liquid drops in my mouth. I just want to spit it out every time. How do I fix that problem?

2. The other thing is if I use Higher Wattage and High settings the liquid pours out of the air flow and starts leaking and backspits in my mouth.

(Before I vaped with new coil)I put the new coil in, I soaked it for 10-15mins, while I fill half tank of E-liquid which is 0.8Ng/0.2PG. Then I inhaled 3-4x with no button pressed. Then I vaped to test, still leaking. I set the vape to 70W and high setting then blow downwards into the device 5-6x. All I was trying to do is desaturate it. My results got better didnt notice much of a leak but I still get a little bit of liquid in my mouth. If you can help me out here, I would much appreciate it.

Thank you and kind regards

Tuatara Vaper  

I have an aspire Atlantis tank on my ipv mini. Juice is getting in the mouth piece. is it supposed to do that? Its not a lot I can just look in it and see a couple little drops. I don't think its getting in my mouth. Also any one had problems with mouth ulsers from vaping? I quit smoking 10 days ago and I have like 3 or 4 :-(  

I am a confirmed tootle puffer although a chain vaper. My coils are generally 1.8 to 2 ohm and I rarely go beyond 11watts. Even when on a whim I wrap a slightly lower ohm coil I still never go beyond 13 watts. Still I find my drip tips get too hot and burn my lips especially when I use the kraken. I have sores in a couple of places. Is there a way round that. The other day I bought a couple of long ceramic drip tips, the ones normally used for e-pipes but I find they get filled with too much condensation.

What do you guys do? Do you have this problem?  

okay, so i had a problem yesterday where i would keep getting juice popping up on the draw, that problem is solved, however, now on only the second day of light use, on the 1.2 ohm coil that came with the tank i am getting a pretty harsh smokey taste. Its not overwhelming like it is when a coil is burnt out, just an unpleasant taste. I did 4 drops of liquid on the coil before using, everything is screwed in tight. Do i need maybe a couple more drops on the coil?

FYI: using an istick 30w burning at about 14.5-15w  

Hi Guys, If I don't use a spiral drip tip I get a dry mouth. I bought a bunch of innokin jems because the aspire k2 is discontinued. But the Jem the drip tip is attached to the top. Can anyone suggest anything, Maybe there is some other kind of top that would fit it or something, because I've spent quite a lot on them. I normally get my supplies from fasttech.

Thanks for your help
Purr.  

I am running my Kanger Subtank mini rba deck on .9 ohm (spaced 4 wrap 28awg IIRC) at 13 watts and it is cloudy and flavorful. The OCCs were fine but I prefer the rba I think (even though I'm still a bit of a build novice). Many others seem to run it at 25+ watts and lower resistance. I had it at .5 Ω and ~19 watts was good, had dry hits above 23 watts. Now have dry hits above 15 watts at .9 Ω. I'm still playing around, but this current build/wattage is working awesome.

Other important factors:
Tobacco and vanilla DIY juice 4mg 50/50 PG/VG Organic cotton, standard wick Only had Subtank for 3 weeks Coming from BCC clearos Been vaping for 6 years Used to be mouth-to-lung, doing a lot of direct lung but still switching back sometimes What's your style with the Subtank? How are you running it? What's your wick-style? Dry hits? Wattage? Ω?  

Yeahh,okay so I ask this seemingly often...but it happens...coil is working fine but I get little bit of juice...I can't figure out y.I'm using my subtank mini with rba nd I take the tank off the base n hit the trigger n try burning off some excess juice n it's still getting juice in mouth...What cud b the reason or reasons nd what r some ways to prevent it or stop it  

Just as the title says..just bought a kayfun lite +/ Russian 91% clone, and the drip tip gets hot after a few hits..using mvp 2.0 that only goes to 11 w ( which is where I usually vape) with 1.7 coil/cotton wick..should I just look into another drip tip made of a different material? This is my first rta..my protank 2 tip never got hot even when chain vaping..the tank would warm up pretty good, but never the drip tip.  

Hello everyone!

I did this pretty interesting experiment on using a set of coils for years.
I own a Digiflavor DROP RDA, on which I installed dual "Flat Alien Clapton" coils, each running 0.45ohm's on paper, and when measured, it was 0.21~ ohm's together.

Almost everyone says, when a coil turns black, trash it. But you can also burn the excess gunk, wash them, and reuse them a couple of times!
But what if I were to clean them all the time and vape further?

Well, after around 2 to 3 years of vaping, cleaning, and reusing the same coils, I can finally answer.

The coils are always on some kind of a flavour, even if you didn't drip a flavoured e-liquid. I ran through 20ml of pure sweetener mix juice, you still get a previous flavour, in my case which was chocolate.
The Ohm's over these years increased from 0.21~ to 0.24~ (Measured today).
The coils are always black or dark brown. Never to be cleaned like new. Each drip is full of taste, even after cleaning/burning excess off.

If you have any questions, be sure to ask!

That's all for today!  

a few little questions. I actually like dripping my 3 mg nic in max better even than vaping. I drip using 3 mg nic on a Istick 50 watt set about 23 watts with a draw of about 2.5 seconds and the coils reading says 1.6 ohms and the air holes blocked a tad on the el diablo bael. I vape on the Istick 20 watts somewhere around 7 to 8 watts on factory coil of 1.8 in a nautilaus mini
my questions: 1) does sub ohm in a rebuildable tank give flavour similar to a dripper
drippers seem to require higher watts is this in anyway suggested as less healthy ( I am not too concerned about the increased supposed formaldehyde issue I believe Dr F had issue with the research and in my opinion I probably breathe more formaldehyde off gassing wandering around carpets and insulation and pressboard)
2) the nic level is quite a bit lower in the dripper Does this actually translate to a drop in nicotine/contine levels in my blood in other words would I need to drip more to keep my nic levels somewhat reasonable re setting off " the I want a smoke brain run"
3 if I were to drip only for 3 or 4 days am I likely to find my 12 mg vape to strong

thanks for any insight you might provide