I accidentally locked the up and down buttons by pressing both of them simultaneously for 2 seconds, I have tried unlocking them by doing the same thing like the instruction manual calls for. It doesn’t work, no “unlock” pops up or anything. You can hold them as long as you like and...nothing.
I have since figured something might be wrong with it as I am almost positive I’m doing it correctly. Now I have tried getting the reset button to work in hopes of the up and down buttons being unlocked upon reset. I hold the reset button for 5 seconds and I’ve tried the method of the combo with the fire button and reset as well as the up arrow and reset and the screen goes blank and turns back on but never says reset and the settings are still the same as before.
My next idea is plugging it into my computer in hopes of an update fixing this but other than that I am out of ideas. The device is stuck on 20 watts which is too high for the cartridge I’ve got on it. Does anybody have any ideas, please help me out.
I caMe home from work and seen my topside single was lit up on my dresser.I hadn’t used it in a couple days so I picked it up only to see that the wattage is going down non stop and won’t fire and it’s as if the wattage down button is stuck. It’s not though. I can’t find anything small enough to take the panel off so I pretty mad. Only
I’ve had Mabye 40 refills with this mod and never been dropped . Just use it on the weekends when I drive mainly that’s it . This is why I hate regulated mods. Anyone else have this problem? I don’t know why it doesn’t even come with a Alan key to
Take it apart.
Hi, folks:
My order arrived in NYC from Mt Baker in 48 hours! Yay! I still have two full packs of cigs! Wow! I'm a happy girl! But ...
There're no directions for my battery. Mariel at Mt Baker had emailed me that to use the Kanger EVOD 1600, I should press the button, and if that didn't work, I should press the button five times fast, and that'd work. That made the light come on, but when I went to smoke it, the light was off. It appears that when I want to smoke, I need to hold the button down. Is that right? That seems like a pain in my bottom.
Worse, when I smoke, I cough so hard, I cough a lung up. I guess getting the 24mg wasn't a good idea after all. There's a place nine blocks from here called "Smoke Shop," so I MAY be in luck, but I live in the hood, so my hopes aren't too high. Still, how badly can they mess up some plain juice? I guess I'll find out, because I need to water this stuff down. Right? Is that what I need to do? That's my goal; what am I looking for? Is I get plain glycerin, I'll water down the flavor. Am I looking for, say, some Blood Orange with no nicotine?
Man, is this device ever BIG. I'm very slender, and this thing is about the size of my forearm. And the Blood Orange tastes good enough to eat, but bloody hell; I've coughed up my liver after three hits.
Do do I need to turn this thing off somehow? It looks off, but do I need to press the button five times to turn it off? Since it doesn't come with any instrux, I have no idea whether it's sitting there killing its battery.
It comes with a sleeve that sits between the tank and the battery, but it doesn't fit snugly, so it rattles. I guess a better word is "jingles."
The medium-sized case I bought doesn't hold anything but the charger and the spare tank. Oh: I guess the coils will fit in there, too. Sure doesn't fit a whole kit like in the photo! I don't think this gizmo will fit in the clutch purse I carry around. (It's really small.) I'm gonna hafta buy a bigger purse!
So far, I'm not a happy vaper yet, but I'll get there. I hope I will, anyway! Thanks for some tips!
Binky
Well this sucks, I have an iStick 30w and toptank mini, I ran out of pre made coils so I thought i would try the RBA of the toptank. At first it read out as “protection” upon trying to fire it (I think the ohms were too low on the pre made coils included with the RBA at .1), then it said low battery (it was almost fully charged) so i plugged it in and tried to fire it once more and the thing started smoking (no protection message this time, just a little puff of smoke within the LED window). I only fired the button for a split second and it still seems to be functioning. Not sure what I should do lol or just ditch out on it? It appears to be working yet but stinks like an electrical fire now. I’m kinda reluctant to use it (I still have an old coil but it was starting to taste funky). Any advice or idea what might’ve happened?
I like the buzz feeling I used to get when I started vaping and want to feel that again so iv stopped vaping for the past 2 weeks but im afraid that wont be enough.
Any one else do the same thing and how long did you wait and did it work?
Ps I used to vape a good amount, id say i used to smoke about a juul pod a day.
hi my smok 22 vape pen button is jammed in so the top bit is fully pushing in and the bottom is fully not pushed in. it’s not firing or anything when i don’t want it to so that’s good but it also won’t fire at all. idk how to add images
I've had this Vamo v4 for 3 months and it's been great until yesterday. It says "short" on the display.
I have tried several different coils, I have cleaned it really well. Is the pin not touching, or do I need to reset it somehow?
It will give me 2 or 3 vapes and then say short until I try a new coil, then it does it again.
HELP! I am stuck with an old ego until I can fix this problem and I want my nice clouds back
Thank you for any ideas.
hi i have and endura Endura T18 vape and it is fully charged and full tank but when i press the button it goes orange and is still orange when i take my finger off the button but then it goes off. when i press the button the cape is not firing and doesn’t work. what do i do?
Okay, so I Vape in very “precise” ways but I cannot figure out how to calculate (do the proper math) on how much I nicotine I am consuming. Can someone help? I have been vaping the exact same way daily for a long time, but still don’t know how much nicotine I get (just an estimate) per session because I suck at math...
Details:
1.) I vape 3mg (3mg of nicotine, per ml of juice) of nicotine using a “Smok Nfix” that holds a 3ml pod of nicotine juice. So that’s 9mg of nicotine, per pod.
2.) I set the wattage to exactly 22W on the vape, always, and it is a MTL pod device.
3.) I take EXACTLY 5 puffs over a period of 5-10 mins. Every puff is EXACTLY 5 seconds. Sometimes only 4 seconds, but just say 5 to make it easier. I use my watch or phone’s timer to make certain the timing is exact. I inhale the same way every time. So 5 puffs X 5 seconds, per puff, equals 25 seconds total for each vape session. After those 5 puffs, I don’t vape again (at all) for 1-3 hours, just depending.
....But how do I figure out how much nicotine I am getting in those 5 puffs? I know that in my Nfix pod there is 9mg of nicotine, in each pod.
I also believe 1 full pod (3ML) gives approximately 325 seconds worth of puffs, with each puff being only 1 SECOND. I only tested this one time so I am not certain, but it’s an estimate.
Can anyone help me do the right math here?
I also still smoke ultra light Marlboro cigarettes (from what I read on multiple sources you only absorb about 0.5mg to 0.7mg of nicotine per cig on the ultra lights) but only 1-3 cigarettes per day.
But I am wondering if my 5 puffs on the vape (5 puffs @ 5 second each) is even remotely close to being equal to an ultra light cigarette that has about 0.5mg nicotine per cig?
Thanks, I suck at math so if anyone can help lol
Hi,
I just tried to TC vaping - and it’s awesome!
it was harder to build the coil, took me couple of tries, but once I reached R of 1.3, everything started to work.
I used 26awg wire SS316L (that’s what they had ready in the store).
I have no dry hits - at all, it’s just perfect. It’s like having on the fly automatically adjusted curve!
I do have one small problem- 1 out of 10 mod firing - (almost) nothing happens.
is it a problem (not good chip/mod, wire, else?), or is it intended? (Coil overheated, wick is dry, else?). But that’s a small nuisance - I wait 10 seconds and wape again no problem.
what I still don’t understand - why I was always told at the stores “don’t TC vape - it’s the old way, now VW is the way to go” without any explanation.
So far I have a feeling that it was done exclusively in stores interest:
- because they know it’s harder to built, so they didn’t want to have a complaining customer “it does not work”, because the mods for tc probably cost more so it’s tougher sell, and they wanted to sell me more coils, wick, juice...
are there other reasons against TC? (Safety, medical reasons (idk - SS wire releases particles or something - seems unlikely (I know with Ti and Ni you should be causious)), else?
I continue to research this topic as well, online, YouTube, etc, but so far I found nothing against, except what I already mentioned (mainly it’s a bit harder to build the coils).
Would appreciate your opinions!
regards,
Vadim
ps. I use EHPRO Cold Steel 100 mod, Siren 2 MTL RTA.
Happened today. Smoktech xpro m80 plus bit the dust.
The "ghost fire mode got me" 510 is currently a direct power output, on or off it will constantly fire atomizer's.
I have reset the mod, turned it on and off. Only solution is to screw off my RDA.
I understand safety, ohms law. And make sure everything is operating properly. I have taken good care of it. Really no fault of my own to be honest.
Be careful, just if you own one watch it. If i would have had it in my pocket and it started firing and i had the radio playing and not heard it? Thats pretty serious IMO. Just figured I'd let you guys know.
Vape on vape SAFE!