Offbrand, Need Advise

Hello,

I am having a leakage problem with my TFV-12 Beast King. I have been using this tank for roughly 3 years and I have never had this issue shy of leaving it in the car when I run into the store or forgetting to grab it rushing into work. I tend to stick to the same juice at large chunks at a time. I have been vaping the same brand and flavors for the past year or so. I also stick with the same coils, either the T6 or T8. I have also used the same mid for 2 years. This is not just a subtle leak either, it is dumping tanks at a time through the air vents. I have replaced the o-rings all around just in case and still no luck. As much as I hate to think like this, the leakage began around the same time of the release of the TFV16. Has anyone else noticed this issue with their V12 or have any recommendations on a proper remedy.  

I am now living in the US, but will be moving back to the Philippines at the end of the month.

Got a question for vapers living in the Philippines ..... As you may know, many of the ECF members here living in the US purchase vaping items from companies like FastTech in Hong Kong due to the free (but slow) shipping, and pretty cheap prices on Chinese made vape items.

How about the Philippines ... Is it as easy to purchase on-line from companies like FastTech and have it delivered to your residence as it is here in the US?

Should be even faster delivery to the Philippines than here in the US since the Philippines is so much closer to Hong Kong than the US is.  

So I just placed an order for some vape gear on Gear Beast. Been eye balling their site for a few weeks now.... kinda seems like the new fasttech in a way. I've ordered from fasttech many times. Their shipping was actually quite fast when they first started selling vape gear, but that went down hill quick as they got more popular.

So I'm wondering what kinda time line I'm looking at for a west coast USD delivery of my purchase. I figured you guys could help me out as I'm assuming a few people seeing this post will have ordered from them before.  

The tank I'm using only leaks when used over fifty watts. Less than that no leak
Anyone else have this happen.
It's a baby beast tank. It leaks from the air holes.
Thank you  

I busted my tank and my local store didn’t have another so I just decided to buy a whole new head/tank to go on my SMOK morph 219 mod. I asked the store clerk several times before I made the purchase if the tank I’m buying is compatible with my mod. He insisted it would work. Well now when I get it home and try to use my new tank on my mod (SMOK morph 219) it keeps asking if it’s a new coil with a different size every time. Any advice? And no I didn’t forget.... the new tank is a vaporesso cascade tank 7ml. 60.5X25MM 81g.  

Joyetech eGo One Mega E - Cigarette Kit 2600mAh Support 1.0 Ohm / 0.5 Ohm and CLR Atomizer Head-42.98 and Free Shipping| GearBest.com

Anyone order from Gearbeast.com ?

Thinking about upgrading from my Ego One to the Mega. Good price on gear beast. Need some positive feedback on gear beast first. Thanks !  

I have been vaping for 4 years now. I am using the baby beast tank. I have 3 of them.
I have never used anything else because,, well, it works fine for me. My problem is that I am having a hard time finding coils. I used to by clone coils on ebay for dirt cheap. There are no longer any coils on ebay. I cant find any coils online. They are either out of stock; or very expensive. What do people do nowadays? Do people still use the baby beast or has everyone
changed to something cheaper/better? I always use Q2 .4 Ohm coils. I only found 1 place online that has them and they are $20 for 5 of them (including shipping). What would you guys do? I was so happy with the clone coils. They were inconsistent but cheap. Some would last 3 days and some would last 10 days; but for $1.35/each I was happy.
Thank you for any advice you can give.
MrElder  

So I ran into a good guy I hadn’t seen for a long time who vapes DL. He’d recently busted his main vape and had picked up a SMOK as a quick emergency backup.

I suggested an ageis legend and a Doom atty to him, but he wants light weight, which is a specialty of neither of those devices. He can wrap and wick an RTA, has a lot of kanthal to use up, and wants a tank bigger than 3ml. The more the merrier I suspect. His batteries also suck.

So if it would please the participants, I’m looking for suggestions.

Mod:
- light weight. Small would be nice to
- reasonably high quality. He doesn’t need ruggedized necessarily but he wants it to last.
- Low cost (he’s willing to work with Chinese no-names and to shop China channel. He likes Ali-express)
- 2x18650, though I suspect a 1x2x700 would also suffice. He vapes DL so a certain amount of power is needed
- No Blinky Lights (this one is absolutely non negotiable)

Atty:
- DL
- Doesn’t leak (yeah I know. Anything will leak.)
- Capacity over 3ml

I’d personally like to add no paint or gold electroplating over pit metal. He didn’t ask but they suck bad.

Gonna mail him a link to this thread.

UPDATE:
Dude is an old ECF member and his account still works!
The person I was asking for is @rigorist

He will have more accurate data than me.  

Hey there guys, new here.

I have a Vappresso Revenger Mini kit and I have upgraded my tank from NRG SE Mini tank to a "Geekvape Z Sub Ohm tank(Much Larger Tank)". Because I wanted to taste more flavor and still blow lots of clouds in the air with my vaping device being fairly cheap.
I put a New Geekvape Z series coil 0.4ohm 50-60W because I burnt my original 0.2 Ohm coil , I wont talk about my previous coil. I'm getting 2 problems here.

1. I'm using 60W, normal setting and every time I vape or inhale I get a taste of E-Liquid in my mouth. However its blowing perfect clouds and still getting an amazing taste but its just that the liquid drops in my mouth. I just want to spit it out every time. How do I fix that problem?

2. The other thing is if I use Higher Wattage and High settings the liquid pours out of the air flow and starts leaking and backspits in my mouth.

(Before I vaped with new coil)I put the new coil in, I soaked it for 10-15mins, while I fill half tank of E-liquid which is 0.8Ng/0.2PG. Then I inhaled 3-4x with no button pressed. Then I vaped to test, still leaking. I set the vape to 70W and high setting then blow downwards into the device 5-6x. All I was trying to do is desaturate it. My results got better didnt notice much of a leak but I still get a little bit of liquid in my mouth. If you can help me out here, I would much appreciate it.

Thank you and kind regards

Tuatara Vaper  

ive decided this is the tank for me. i originally wanted a falcon king, but i think this tank is a stepup from that. i cant decide which coil to go with. im looking for flavor over cloud production what would you recommend?