So I recently bought a brand new Vaporesso Gen mod. Normally I stay away from compression/press fit 510 connections but I decided to give the Gen a shot. I've only had it 1 day, and already I've noticed that the 510 connection is raised slightly above the top of the mod and with a tank connected it is slanted towards the back of the mod. From what I can tell the 510 isn't loose at all. But it still slightly worries me. And a couple times I've taken a hit and everything is fine. Then all of the sudden while my finger is still pressing down the fire button it stops firing. Has anyone else experienced this with the Gen?
I have had a lot of mis fires on my Smokless Owl 25.00 squonker and had to press down extra hard
and sometimes side ways to get it to fire.
I just done some contact cleaning and scraping on the Smokless Owl Button.
I took my wifes Emory board finger nail file thingy and depressed the firing button and held it depressed and rubbed it
across the firing pin and then took a small jewlers screwdriver and scratched it back and forth across the end of the pin and
did the same thing to botton ground pin.
I noticed some black color on the end of the firing pin before I started this cleaning process.
I gently took the screw driver and scratched back and forth across the positive and negative end of the battery just to
take any small film or oxidation from the ends just to make a better connection.
It seems to fire now just like it should with no MISFIRES---mod is now perfect !
I've got a couple of these little mods and both have the same problem. They continue to fire after the button is released. When it happens the display changes to the power on/off and keeps firing until the unit restarts (presumably after the 15 second cut off?). I can only think that the mod is registering 3 presses when I fire which triggers the screen change, and there is a bug which stops the release of the fire button registering. Anyone experienced this? Any fix? I'm surprised it's happening with two units so it must be happening to someone else!
hi i have and endura Endura T18 vape and it is fully charged and full tank but when i press the button it goes orange and is still orange when i take my finger off the button but then it goes off. when i press the button the cape is not firing and doesn’t work. what do i do?
Hello I have had this smok g-priv 2 mod for ages now. Now for some reason when I press the trigger button while a tank is on the mod just shuts itself down. I have tried cleaning the 510 connector, tried using 3 different tanks, charging the batteries, etc still no luck. It started happening all of a sudden after I refilled the tank. I can click the trigger while no tank is in and no issues but if a tank in connected is shuts itself down. Any ideas?
Here is a video:
I just got my new vape kit and it is a Vaporesso drizzle kit (the small one).
I have easily been able to take the top off but recently I actually noticed the airflow valve that you can open or close, and somehow I never noticed it was there and now that I do, I have huge problems trying to take the cap off also considering its a super small (ring) that you need to twist it just wont come off. I tried the rubber gloves, the alcohol, and the hot water but none of them did anything.
Hey guys, sorry if I post this in the wrong place, but I didn't find a sub forum that seems appropriate.
So, I have a BCV Surfrider clone (hybrid) and it has been working great but all the sudden this last weekend I noticed one of my batteries just stopped working.. not a big deal. So I put in another battery. Still not working. So I was playing around and I noticed that my button got extremely hot. I took the battery out and noticed that it was hotter than I've ever felt.
I was playing around with it to see if something is wrong, but everything seems fine. I accidentally put in the battery backwards and it worked fine like how it used to.
Anyone have any idea what is causing this?
So ran into another problem with my itaste 134, it was working fine a few hours ago. I went to refill my tank and when I put it back on it wouldn't fire, I looked at it and noticed when ever I pressed the bottom the light would instantly turn on then stay lit for 5 second. But no vapor at all. It now does this with or without a tank on it. Any idea what this could be?
Wich finger u guys use to press fire button on mod???
Index or thumb????
Hey everyone. I've noticed that just about every day since I've used it. When I hit the button to fire it, it will fire for a couple secons then stop, and then fires back up again. And it's starting to concern me. Does anyone else have this issue? And how would I go about fixing it?
I am new to vaping. I am starting out on a kanger protank mini3. I recently replaced the coil, cleaned it, reassembled and changed out the juice. My problem is that every few hits, it tastes really bad. I read that it could be a dry hit, so I tried to work on that. I did dry burns and primed it without pressing the button. I even loosened the coil slightly making sure it had good air flow. I am completely befuddled. It's not constant, just every 6-8 hits it so. Any advice would be sooo appreciated. Thanks!