Uforce N1 Coils

Hello everyone,

I'm vaping with a Vaporesso Swag and have tested the GT2, GT4, Mesh and Ccell coils so far. I'm vaping 50/50 VG/PG liquid with 3ml/mg nicotine. I always use the coils at the lowest recommended wattage, airflow fully open and my puffs are usually 2 seconds long at max.
Now my problem, I'm going through coils faster than others change their underwear. I'm on my third coil now for 10ml (!) of liquid.
I prime my coils and I let them sit in the tank for at least 30 minutes before I use them. I get muted flavor after maybe 5ml of liquid and it tastes burnt after 10ml of liquid. I've also tried different liquid brands and at least 20 different flavors.
So what am I doing wrong? I'm about to quit vaping because of the immense cost of coils I go through. I just can't figure out what I'm doing wrong.  

Hi, I just got the 8 in 1 pirate coil kit with 8 different sets of coils, I'm trying in a nonmechanical mod with the DejaVu RDA with a dual 0.45 Fused Clapton Coils, and I need help calculating at which wattage should I vape for Maximum Flavor.

Thanks for the help  

Im new to external battery mods but have been vaping for 3 years and I know how to prime a coil with e-juice. I go the extra mile after I prime the coil and let it sit for a minute. Then I fill up the tank put it back together and do not touch it for at least an hour or two just to make sure. I just got my now verified as legit sigelei sobra with the moonshot 120 both of the coils from that taste like those knock off BS eBay fake coils. I started off at a very low wattage and I don't know what's wrong both coils are disgusting. It's not exactly a burnt taste or a dry taste it's like a sour off taste and I can't use them. It also makes me feel like I have something in the back of my throat. What in the heck is going on? Do these coils take awhile to become usable? They're the coils that came with the mod and I verified the mod so I assume the coils are also okay. I even went so far as to try the second coil on a different mod but with the same tank just in case the mod was frying things the very first hit. Can anyone give me an idea of what's going on so I know what I need to do and also if anyone could tell me whether or not the Cascade baby coils will fit in the moonshot 120  

Hey Guys,

I have been learning the ropes of RDA vaping, and so far I absolutely love it! As the title states I’m wondering what coils (FC, Aliens, etc) Would be best for flavor and vapor output? I’m currently running some Wotofo 0.33 Fused Claptons (~0.17 in dual coil) @ 60 Watts. The flavor and vapor is ok, But I’m looking for a little more. Maybe something I could run at a slightly higher wattage and get more vapor / flavor?

Any help would be greatly appreciated!

Thanks!  

I'm using a Subtank Nano on the KBOX. Should be absolutely no problems.

But my coils (both the 0.5 and 1.0) are tasting awful. I prime them great, I make sure everythings good and secure, and I'm using a 75%-ish VG juice.

But I can't go above 20 watts with two new packs of coils I have, and especially on the 1.0 coils, that's ridiculous. I'll get a vaporized rubber taste that tastes like the worst clearomizer coil I've ever come across.

Dry cotton should just have sort of a cottony, almost doggy or smokey taste. But this is a pure rubbery flavor. Are the gromets going to crap? These things should be built for Sub-Ohm Vaping!

I have no clue what's wrong but I can't use this thing anymore.

I'm also getting more juice in my mouth than I would if I drank it. These coils have started to spit and spew like nothing I've seen. I've used these coils for months and could always go up to 30 watts, no issues!  

Hey guys I'm looking to upgrade from what I have right now which is the atlantis v1. I'm not a huge fan of the atlantis because of the inconsistency with the coils and the loss of flavor after 2 tank full. The atlantis v2 seems nicer with the occ coils and improved airflow, but I'm not sure if its worth the upgrade since I could just get the new 5-pack occ coils for my v1. The subtank mini still has better options with the occ coils and RBA. Also it seems the occ coils for the subtank is easier to rewick which could save me a few dollars.
I'm not sure which one to go with. I'm leaning more toward the subtank, but still not sure. Maybe someone who has either one or knows more about them could help me. I like to have a good amount of clouds while still keeping the flavor.

Or if anyone has a sub-ohm tank they could recommend that they like more than the ones I mentioned that would be good too.

I use an ipv2

Thanks  

Hello knowledgeable guys and gals of ECF!!!

I like to switch flavors a lot, perhaps a little to often. I have read here that flavors can linger within the wicking material for quite some time. So long in fact that my habit of switching flavors doesn't provide enough time to work the old flavor out entirely. I have a bunch of extra coils for my nautilus mini and my Subtank mini. For accurate flavor I will switch out a coil for a flavor change. So I essentially have a coil for each flavor.

So here is my question!

How can I properly care for, or store these coils when they are not in use? Right now I have them sitting in a little dish of water so the juice doesn't dry up and gunk them up. Will this method harm them? Can I leave them in the water for a day or so, perhaps a few days even?

Thanks for taking the time to read this! I hope I'm not damaging my coils!  

Hello you guys, after being hesitating for 2 weeks, I finally chose the Voopoo vinci X and personally I think it's not bad, so far so good.
In this discussion, I am just wondering if anyone has the same question that, what's the best wattage setting when use their 0.3ohm and 0.6ohm oil? (My ejuice is 3mg freebase/Cookie Twist)

Although they recommend 32-40W for 0.3ohm, and 20-28W for 0.6ohm, the ideal wattage which comes with perfect flavor should be an numerical value, right?
Hope to hear your recommendations, thank you.

Have a nice vaping day
Gavin  

I'm a little late to the drop-in PNP coil game, I just got Wotofo's SMRT PNP rebuildable coil system and I LOVE IT. I've always been an oldschool rebuildable, low ohm, high watts, big hot vapor fan, and extremely skeptical of the replaceable pods because, let's be honest 5 years ago they didn't hold a candle to a plain'ol RDA that you have to spend 15 minutes building and getting just right.

Well the PNP coils have me kicking myself for not trying them sooner as they produce 95% the same amount of vapor of a *perfect* RDA build, but with 10x better warmth and flavor.

So I'm wondering why the heck other companies besides wotofo aren't upping the anty and making better PNP coils like Wotofo (the Voopoo ones are great, but Wotofo really outshines them with their rebuildable mesh-style pods). I would easily pay $20 for an Ohm Science pre-made Alien Clapton pnp pod or something a little more intense. Since you can put these PNP'S on an 80+ watt mod, there's a world of possibility for plug-n-play cloud chasing if you want, and I think there's some financial incentive for that.

Does anybody know where you can maybe buy some blank wholesale pnp shells because I might try and make my own if no one else does!  

Does old coils have any negative affects?

I typically burn off the gunk on the coils and put it through a good rinse then change my wick every few days. This was especially true when I'm using standard kanthal on the Protank.

I recently switched to a Solomon 3 using claptons. I find that there is very little gunk on the coils, I still burn off what I can before replacing the wick. I usually change the coil every week and one wick in between. On this one however, I'm 2 weeks on on the same coil and had only replace my wick once using the same liquids that I normally use on the Protank.

What I notice is the vape isn't as smooth as if I were to put in a fresh coil. I think I just answered my own question but what do you guys have to say about it?