IF you were to improve on the Crown 4 kit how would you do it? what would you add or take away from that? would you make the Checkmate 21700 compatible? would you change the colours?
Hi vapers.
So I wanted to change out the o-rings on my Crown IV tank as it has a bit of a leak when it's almost empty....
However, I can't figure out how I'm gonna get this o-ring out.
Any tips ?
Any ideas are much appreciated ! Thx !
EDIT: Got it out with a tiny dab tool !
I'm so tired of the recent "mesh only" craze. I just don't understand it at all.
I have used roundwire sub tanks for close to 4 years, and can generally get a pretty accurate flavour representation from my juices. Obviously some are better than others, but the og Uwell Crown coils and .4 Cleito coils are pretty stellar.
Recently decided to mix it up and try something new, so i went on the hunt for a new sub tank, only for the market to be completely littered with mesh-only tanks. The only tanks i could find that still use roundwire are from years ago.
I figured i had been missing something, so i picked up a collection of mesh sub tanks, only to be dissapointed by every one of them.
The list was:
Ehpro Raptor with both the raptor coils and the Horizontech Falcon coils.
Innokin isub B.
Aspire Odan Evo.
Aspire Cleito Pro.
Geekvape Zeus.
I got absolutely zero of the liquid nuance that i get from 3+ year old roundwire coils. I just get a blast of full-on "all the flavours at once", and for juices with sweetener, that is the primary profile. Interestingly, i found that with fruit flavours, it was a little more palatable, but since i primarily vape bakerys this wasnt all that much use.
I figured i would give the mesh rta's and rda's a shot, as everyone is raving about them, so i picked up:
Wotofo Profile RDA.
Wotofo Profile Unity RTA.
VandyVape Mesh RTA.
Tried all of them, same dissapointing experience. They were basically mesh sub tanks in RTA form. Literally exactly the same "flavour".
So, after wasting a chunk of money on all of these, im back to using the Cleito Pro with the 0.4ohm Cleito coils and the Uwell Crown Mini with the og Uwell Crown coils with the occasional use of the Wake Mod co RTA when i can be bothered to rebuild.
Is it just me? I dont understand the hype in any way. Maybe it's just my particular flavour profile doesn't work great with mesh, or maybe its just me, i dunno. It's just a shame to see that any recent sub tanks that come out are all mesh, apart from the very occasional sprinkling of roundwire thrown in here and there.
Anyone else have a similar experience? And have any recommendations on recent sub tanks to try that aren't just mesh?
Hey everyone,
So I've had the crown 4 tank for about 6 or so months and switched to mesh coils a couple months ago, off and on. The reason being is that it seems with the 4-packs I've bought, it's almost guaranteed that 2 will be either VERY picky about how tight i screw the tank and coil on the base. It has to be JUST tight enough where the box gets an ohm reading, but any tighter it looks like it shorts out (the ohm reading blinks 0.00). I've never messed around with the coil before, i usually just end up going back to the traditional coils and dealing with the lacking taste. Any suggestions? I'm using the sub box mini v2 if that makes a difference.
Thanks!
So, I recently purchased the Gaur-21 with the Valyrian II Pro, and the mod is 21700 and 18650 compatible. I was curious as to the benefits of the 21700 batteries, because I’ve only used 18650s.
It's often been said to test a new coil build on a regulated mod before using it in a mech mod. Just for fun, I tested a new build on multiple platforms to see how consistent they a
These are AVS stainless steel premade quad core clapton 30x4/40 3.5 7/6
Two coils in a Dead Rabbit V2 RDA
Coil Master Tester 0.17
Uwell Crown mod 0.19
Wismec mod 0.18
Geek Vape Aegis 0.18
Vapresso Luxe 0.18
Closer than I would have thought!
Incidentally, the old coils were in there for 8 months, although this unit is in rotation, so maybe a months worth of actual use.
Also, the top cap was just about impossible to remove from the tube. I had to insert a chap stick into it and slam it on the desk for it to come off.
I need orings as my Crown 2 tank is leaking. I have a digital caliper but I am wondering how do you measure them without distorting the perfect circle? Also since they are worn the size will be off a little. How do you compensate for that?
Also wheres the best place to order and what material like silicone is best?
Thanks
Hi I'm waiting for a uwell caliburn g vape to be delivered does anyone know roughly when the coils and pods need changing on them thank you
Wanting to take a poll or get some feedback on what some of you all think about RTA's. I have had the Profile Unity mesh rta for several weeks and other than getting the build right its freaking fantastic. I also have the Cleito 120, Crown IV, Falcon King which the M1 Coil to me is the best coil for Falcon, but the RTA is by far has the best flavor at of all of my tanks. I am thinking about buying another one and the one that is catching my eye is the vandy vape Kylin 24 mm. Anyone have it or think there is something out there with better flavor. I have stayed away from RDA's due to I do not care for hot vape. A friend has told me if I do try an RDA to go with the Profile Unity Mr Right RDA or Apocalypse RDA 25mm by Immortal Mod.. Biggest issue is I travel a lot and not sure I really need to be messing with RDA. ..
Thanks for all the feedback on last thread
I have an MFeng UX that have temp control built into it and I have a crown iv tank that has stainless steel coils with it out of the box. I tried the tank on an IStixking 530 mod with coil set to stainless, I tried a tcr of 0.000093(I think?) And kept the temp below 400. The Sticking said no juice detected, I looked it up, some people were able to use nickel and it work good. The coil died fast, and I wanna learn how to use temp control without ruining the other coil. Basically, I wanna use it on my mfeng, and not guess at what settings lol. Any advice?
I am looking for a dual 21700 mod. The available ones, I probably will buy but, there aren't many to choose from. There are several single 21700 mods. My question is how long (on average) will a single battery mod charge last (I know this question is subjective). I vape around 65 watts, most of the ones I have seen online are rated 100 watts. I do not want to leave home and my mod die out because it was a single battery mod. I know I could carry a spare charged battery around, I just do not want to have to. Thanks