Using A Different Coil For Aegis Mini Kit With Cerberus Tank

Hello, I have a question about some coils i had laying around from my previous vape.
Can i put my old V8 BABY-Q2 (O.6 Ohm) in my new aegis mini cerberus tank or would this cause problems?
Thanks in advance.  

Hello, so i am a pretty experienced vaper (did it for a year or so, then quit and came back). Right now i have an aegis mini with a cerberus tank and a

Hi all

I started vaping again after many years like a month ago. My set up atm is Aegis Solo (came with cerberus tank which leaked madly), currently using Aspire Tigon tank and I have an Innokin Zenith Pro which I haven't try yet.

Is taking me a while to figure out what kind of vaper I am, still not 100% sure tho, I know I prefer DL over MTL but not at high wattages because I believe the vapour becomes to warm for me. I like the Tigon tank but is a little to restricted for my liking, I will like more airflow.

Questions:

1 - Is DL at higher wattage always a warm/hot vapour?
2 - What suggestion for a more loose DL tank with vapour not to warm.
3 - Worst case scenario if the cerberus won't stop leaking (I do like the options of several coil compatibility) would the Zeus top airflow be a good option or others?

Any help will be greatly appreciated.  

I’ve been vaping the same 2 mods for over a year and 1/2. They are Geekvape Aegis 100watt with Cerberus tanks. I use a couple of tank fulls per day. Lately I’ve been getting short battery charge life regardless of new coil or not, old batteries or new. I recently changed from .3 to .2 ohm coils, does that make a difference? Do these things wear out? I thought the only thing that ever needed replacing was the coil. I have 6 of the same unit in stock. Is it time to replace and pitch?  

also which mg nicotine would be reccomended for sub ohming for a person who vapes MTL 10 mg,



Was looking for a vape to use for DL, without making my own coils, found the geekvape aegis mini the tank it comes with has good reviews, not sure about the coils though has anyone tried them?  

Hi,

I have bought this kit I am waiting for it to be delivered, anyone got any experience of this mod?

Thanks

Christine  

Hello everyone. I am new to the forum but I have read a few more topics before having to create an account and explain my problem in detail. I own a Geekvape Aegis Mini TC 80W (with the Cerberus tank) and I'm using a 50% / 50% e-liquid, with chocolate, coconut and oats from Nebula. I have owned it for about 2 weeks now. I've been using a .3 ohms coil in these weeks, and I've been really good, except for the last 2 days, I've burned the coil slightly and I don't like the taste anymore, so I decided to switch to the other .2 ohms that I've bought a couple of days ago, so I primed the coil by putting 4 drips in each cotton hole + 2 or 3 drips in the center cotton (it's a mesh coil). I forgot to say that I vape mainly from 30-40watts but it's fine even from 25-42W, I'll never go over it because only the noise scares me. Yes, I know, it's weird. Anyway, my problem is that after switching to a .2ohms coil (it's been about 30 minutes) at 30watts the taste is yucky, totally different, I wouldn't say burnt but not good, plus the noise is like it's muffled, yeah , I opened the holes, if I go over 30 watts the noise gets slightly louder but the taste worse. I would just like to know if I have to leave it overnight to let the liquid absorb well or change the coil directly because it is faulty (I have another 5 of .2ohms but no other so I can't go back to .3ohms)
So, is this normal?  

Hello, Could someone tell me what is a good wattage setting to use on this mod for a beginner I am just starting out?? I will be using e liquid 18mg freebase non salt for starters myself, I prefer tobacco flavor am not a fan of fruit flavors myself. I am presently a heavy smoker. Thank You  

I am looking back at my spending this month, and I've realized the thing I used to get off tobacco and save money is now my full blown hobby and obsession. Bad? Nah - but it was eye opening and shocking! Recently (past 2-3 months) I've bought (this is just hardware. If I listed juices, this post would just be dumb long)

IPV Mini
IPV Mini V2
iStick 30w
Nitecore I4 charger (I2 became not good enough)
4x efest 18650 batteries (to add to the 4 I already own)
case to carry them all in while on the go
Atlantis 5ml extender
20 Atlantis coils
Delta II
10 delta II coils
Delta II RBA
Sense Herakles Tank
10 Herakles Coils
Horizon Arctic Tank
Pre-ordered Lemo II
Melo Tank
22ga, 24ga, 26ga, 28ga kanthal
ceramic tweezers
eleaf atomizer checker
wraps to protect/customize all my mods
Vape Life Drip Tips
Subtank Mini
Subtank mini OCC coils
Kayfun 4
Coil master kit
Screw driver sets
Torch
Butane for torch

Now I want the High Voltage tank

WHAT AM I DOING?! THE STRUGGLE IS REAL /endrant

My favorite so far: IPV Mini II rocking the Herackles tank at 55w - mmmmm

 

So I've had a few various egos here and there, and I've loved them. My favorite has been the Aspire CF mod I currently have with the nautilus mini. I feel like it's about time to step my game up. Kinda.

I want to get into sub ohming. It looks fun and the vapor is impressive. I'm not normally one to vape in public, but at my desk at home it'll add some more fun to vaping I think.

I just don't know where to start. I don't really want to build coils or anything like that. I'd rather go with a tank that can sub ohm. Down the line I'll start building my coils, but now I don't want too. I want to see if it's really for me first.

So my question of the topic. What are some good kits that are basically starter kits for this? I've been looking at the ego one, and the aspire cf variant. The aspire is a tad too big, so I don't really want that. And to be honest I want more of a box mod.

I'm looking to spend around 70 for everything. Anyone want to suggest me a good box mod and tank kit that'll help me sub ohm? Thanks for any help!