So, I recently came across this cheap vape mod in aliexpress and thought i'd give it a try to see if i would enjoy vaping,and later on upgrade to a better one.
This mod is a 2200mah,3.0ml tank ,Wattages are 40-80-100w and i can only cycle through them. The coils that it comes with are 0.5ohm,does that mean i will only be able to vape at 40watts?
I plan on ordering 0.2 ohm for the same device of course,but for the time being will i need to only vape at 40w?
***************************************************************************************
This is the device
I bought the MVP 2.0 Starter kit from Mt. Baker. I like the tank it comes with, but I feel like using a drip fits me better. I started with a eGo like everyone else and recently moved to this Box mod when I saw it for so cheap on baker.
I want a drip setup because I don't vape all the time, but when I do, I like to control how much I vape so I don't binge on juice.
Any setups for "Drip"
Prefer to keep it nice and cheap, as a college student, money is a big problem.
I've been using disposable clearomizers since I started vaping, with an 808 kit, and that's been working fine for me, but I came across a super cheap deal recently for a Kanger Evod starter kit, so I bought one. I paid about $14, so it was a no brainer.
The tanks have these disposable coils, but the tanks seem like that they can be re-used forever, as long as they don't crack or fall on the ground and break, is that correct?
I saw that they sell a glass tank for it also, so I think that I'm going to pick one of those up, and I'll be able to vape on any juice that I please, without the fear of the tank cracking, and I'm assuming that that tank will last for a very long time.
So far I'm pretty happy with the Kanger Evod, and I like the vape from it.
I purchased the Geek Vape Aegis Boost a few weeks back. This is probably the 20th vape device that has stopped working on me. The micro usb port no longer takes a charge and I was gentle with it when charging it. I'm going to stick to vapes that use usb c charging from now on.
Does anyone have a recommendation for a vape decice that has a large enough battery for a full day of heavy vaping, uses usb c and had a large tank that will also hold enough juice for the day? Draw activation would be nice but it's not necessary. I also need something that is mouth to lung because I get a sore throat easily from vaping. Also, I'd much prefer the battery to be integrated in the device as opposed to having to put the battery in. There are too many options on the market and I can't decide which one to get so I would appreciate any help. Thanks so much in advance.
Hi everyone,
I haven't been active for a very long time because i had gone back to my stinky habit again.
Probably because of the place that i am staying doesn't allow the sales of E-ciggy.
Recently, i have noticed that the people around me have started using small little pen device or some called it a Kit & close pod system whatever so. What i seen is just an ordinary device similar to my very first vape pen over a decade ago. Until I managed to get hold of my friend's RELX device and immediately i know what i'm looking for. Everything is so simplified, popped in the juice cartridge and start smoking like a cigarette! And I don't even need to press or hold any switch?! The best part of this device is so small and handy that can easily hidden under the radar of the place I stay but of course the disadvantage is that the cartridges cannot be refill and is costly. Anyway, for someone lazy like me, it should be perfect.
I have googled search a few brands with similar product specification and out of nowhere Bold Vape Lite caught my attention. Have anyone tried and review its product yet? How is the e-juice and build qualities? Because it's only cost $28 for set of kit and 5 cartridges? Dirt cheap compared to my friend's Relx!! Attached is how the package look like. Trust me and google it yourself. Anyway the cost is so low, I think no harm trying and I will update you guys again soon. Meantime, stay safe and healthy everyone
Hi Guys,
I've been vaping for 5 years or so. The main reason I quit smoking and took to vaping was I confess, not for my health, but for my purse. As we all know cigs are too expensive and I actually love vaping more than I ever liked smoking.
Anyway, I'm also set in my ways. Except for a brief foray into tanks, I have used low res cartomizers and have been happy. Now, I am finding it impossible to buy cheap Boge cartos so apparently while I have been happily vaping away without hanging out in the vaping community, the world has moved on and there are all sorts of new fangled products on the market. But, most of the new stuff is ridiculously expensive! I'm just a poor girl, I don't wanna buy fancy crap. Right now I am using an Iclear 16 tank and I gotta say it sucks compared to Boge cartomizers. I use a ton of juice (I make my own juice cuz it is wayyy cheaper) and the wicks only last a couple days compared to 2 weeks for cartos.....What gives?
Isn't there a CHEAP way to vape anymore? I don't wanna buy expensive mods, I use these 10 dollar pass-through rechargeable batteries and everything is cheap and hunky dunky....
Any suggestions on a cheap cheap cheap replacement for cartomizers?
Thanks!
Annie
One of you guys suggested the Voopoo drag x when I discussed my 20th vape device no longer charging through the USB mini. It was a Geekvape which they claim are indestructible. Of course they don't mention how the USB port is a cheap piece of garbage that will eventually fail even when treated delicately. I received the Voopoo drag x in the mail a couple days ago. I didn't realize it doesn't come with a battery so I picked up an IR18650-25R 20A 3.7V battery at a local vape shop. It was working beautifully for about a half hour and then it would just turn off. Even if I pushed the buttons or clicked five times, it wouldn't power up unless I took out the battery, put it back in and then clicked five times. Then I would get a few puffs and it would turn off again. Then today, I started receiving a message that said "atomizer short". I kept getting this message over and over even if I took out the coil and put it back in. Occasionally, it would start working again, but between the device powering off and the atomizer short problem, it's more or less unusable. It was only about $60 in total so no biggie. So now I'm shopping around for my 22nd vape device. Does anyone have any suggestions?
I'm almost two years into vaping and it has been great.
I've been using a VW Ehuge 35 watt 26650 mod with a Kanger Subtank. Its huge and heavy but the battery lasts a long time. Also been using an Innokin Coolfire 2 with a Gladius tank.
Figured it was time to upgrade. Been watching several review videos to see whats out there. A lot of new sub ohm tanks and they all seem pretty good.
I've never had a box mod and figured it was time. Bought a Cloupor T6 recently to put my Subtank on. The T6 is supposed to be a 100 watt device. The Kanger coil only goes to 30 watts so no big deal there.
I really like the T6. Pretty small for a 26650 mod. Surface is slippery though, need to get a wrap for it. Butons are nice any clicky. The battery cover has magnets which is nice, no screw driver needed. Feels solid and the internals are clean. Its thick and the 25mm Subtank fits nicely on it.
Recently after watching some videos, I came across a new kinda unknown Sub Ohm Clearo. Its the Freemax Starre Sub Ohm. .5ohm or .25ohm coils. Mine came with the .5ohm. The .5ohm is rated 20-60 watts and the .25ohm is rated 20-100 watts. Reviewers were all impressed with the vapor and taste of this device. So I ordered one.
Wow, OMG, this Freemax Starre rocks. Blows away my Kanger Sub Tank in vapor production and flavor. Holds 5ml and the air holes are huge. Surgical Stainless Steel and Surgical Cotton used in the coil. Amazing.
After some more research, I discovered the Cloupor T6 really doesn't put out 100 watts. Well, that makes sense as its only a single battery device.
So went to the local vape shop today and bought a Sigelei 150 watt to put the Freemax Starre on. Will order some .25ohm coils soon.
Lovin the Sigelei so far. Magnets on battery cover, comes with a silicone gel case, nice clicky buttons, takes 2 18650. Its taller and wider than the T6 but not as thick. One thing it lacks that the T6 has is a USB charging port.
The Freemax Starre fits perfectly on it. The Kanger Sub Tank is wider than the Sigelei but fits perfect on the T6.
Really enjoying both of these box mods.
A few pics
Hey there guys, new here.
I have a Vappresso Revenger Mini kit and I have upgraded my tank from NRG SE Mini tank to a "Geekvape Z Sub Ohm tank(Much Larger Tank)". Because I wanted to taste more flavor and still blow lots of clouds in the air with my vaping device being fairly cheap.
I put a New Geekvape Z series coil 0.4ohm 50-60W because I burnt my original 0.2 Ohm coil , I wont talk about my previous coil. I'm getting 2 problems here.
1. I'm using 60W, normal setting and every time I vape or inhale I get a taste of E-Liquid in my mouth. However its blowing perfect clouds and still getting an amazing taste but its just that the liquid drops in my mouth. I just want to spit it out every time. How do I fix that problem?
2. The other thing is if I use Higher Wattage and High settings the liquid pours out of the air flow and starts leaking and backspits in my mouth.
(Before I vaped with new coil)I put the new coil in, I soaked it for 10-15mins, while I fill half tank of E-liquid which is 0.8Ng/0.2PG. Then I inhaled 3-4x with no button pressed. Then I vaped to test, still leaking. I set the vape to 70W and high setting then blow downwards into the device 5-6x. All I was trying to do is desaturate it. My results got better didnt notice much of a leak but I still get a little bit of liquid in my mouth. If you can help me out here, I would much appreciate it.
Thank you and kind regards
Tuatara Vaper
My Smok Nord broke last night. I googled the problem and got an endless number of hits from people that have had the same problem. Lots of Youtube videos explaining how to fix the problem. Apparently, it has something to do with the three metal prongs attached to the battery getting pushed in and no longer making contact with the pod. Some guy tore the thing apart to show how cheaply made the springs are that are underneath the little metal prongs.
I spent 40 dollars at a vape shop for my Nord for an electronic device that was made on the cheap for a few pennies. The Nord has been around for awhile, as has this problem with the prongs. Does Nord know about it? Of course they do. Have they fixed the problem with better parts or a redesign? Of course not. What do you think, they are a legit company like Apple or Samsung? They don't care about ripping people off. Some Chinese "engineer" probably sketched out the idea for the Nord while on the toilet. Then he figured out what parts would be needed to put it together as cheaply as possible. The factory probably started producing them the same day and them sold them to marks like me who want to quit smoking.
If I bought something defective at Walmart or Target and brought in the product with the receipt, I would get my money back. How about in the vape world? Not a chance. You've got to deal with the company yourself and they will jerk you around until you give up and forget it. If you are very lucky, they will send you a replacement device after the vape store owner asks the company to do them a favor. Three months and tons of phone calls later, you might get a replacement device. But most people either give up or don't try to begin with. There's always plenty of new marks trying to quit smoking.
The guys at the vape shop told me how great this device is. They must be aware of the garbage they are hawking to people. Or maybe they don't know. People who work at vape shops are not the brightest people. And it's not just the Nord. It's every gd vape I've ever bought. One vape blew up while charging and burned a hole in my carpet which cost me 500 dollars to repair. I wrote about it on here and no one on here believed me and said I was trolling until I showed photos of the blown up device and my charred carpet. I heard, oh yeah, you shouldn't have charged it through a laptop. How the hell was I supposed to know that and why wasn't a safety feature installed to turn it off? Because that would have been too expensive to put in.
Let me ask you this. Why are all the instruction booklets that come up with the vape devices written in bizarre broken English, obviously written by a Chinese person? Because they were too cheap to hire a translator, they didn't think of it or they thought their English was better than it was. If you purchased an Apple laptop and the instructions were written in broken English, it would be incomprehensible. But not in the vape world! That's just normal. The reason they didn't get someone to check most likely is because they thought their English was good enough. That sums up vape devices: good enough. Those Chinese ......s could have found a native English speaker on the street and offered to buy him lunch if he agreed to spend 10 minutes proofreading their bad English.
If vape shop workers had any shame, they would quit, and if the owners had any shame, they would shut down their shops. They are all complicit in this and so are most of you.
Thanks to all the amazing help on THIS THREAD, I've got a plan for getting a new mod.
Now, I want a new tank or two to try out. I currently use Vaporesso GT2 Coils (0.2 ohm) and vape at 60-70 W. I'm a DTL vaper (I just learned this terminology, so forgive me if I've not doing it right).
The only I think know for sure that I want is the ability to adjust the air flow as needed.
What's best? Or if you vape like I do, what's your favorite tank?