My Expensive Search Is Over!!!

So i have one question,i have seen there are interchangeable metal frames for Aegis mini will there be a interchangeable metal frames for Aegis boost ? Does anybody have info on that?  

I have been using an evod for two years now. Yeah, I know, minor leagues, but it gets the job done just fine for me.

For the first 18 months I was constantly buying new coils. I work from home so I can basically vape all I want and I vape A LOT. I use Swagger as my ADV and it will destroy a coil in just a couple days. It was becoming difficult to even find coils to buy and it was getting expensive, so I did some research on rebuilding my own coils. At first I tried to build them with silica wick, but I could never get them to work right. Using 1mm silica wick wrapping around a stick pin the wraps would always be too big and there was lots of leak/gurgling. So I went the cotton route and would wrap around a 1/32 drill bit and then slide the cotton through the coil. Works great, perfect ohms, great flavor. I've been doing this for the past six months. In the first 18 months of vaping I never got sick once. Since I've been using the cotton wicks I've been SEVERELY sick twice (probably a respiratory infection but never went to the Doc), and now I feel like I'm getting sick AGAIN.

I've noticed that I can see little flecks of what looks like cotton building up on the mouthpiece, and I'm assuming, going into my lungs. I think this is what is making me sick--the buildup over time. Anyone else had issues with this? I think I may have reached the end of my rope with vaping and now maybe I'll do what my original intention was (quitting altogether after vaping for a short period of time).

Anyone have any tips on rebuilding coils with silica? I've watched a million Youtube videos and replicate the process perfectly, but the wraps end up being twice the size they should be and I've been unable to slide silica wicks into the coil like I do with cotton because even at 1mm it's too big to fit through the hole. Thanks for any help.  

I ordered a geekvape Aegis Boost Pod-Mod I read on a site that it is a salt nic device and ordered a kit that had 2 juices that came with it. The juices that came with had the option of 30mg and 50mg. I also ordered a few more juices and replacement coils. Iwith the higher mgs because I smoke and when I don't smoke I have a chew in. After doing some research i seen you can't use that high of mgs in a sub ohm device. The coils it came with are .4 and .6. Did I waste my money or can I use 50mg vape juice with the geekvape aegis boost  

Hey everyone! I took a substantial trip down cigarette lane and I want to find my way back home. I’ve not been keeping up to date with the new tech out there but I’m really wanting to get back off cigarettes. I’m going to be lurking around to try to relearn everything so I can get an up to date picture on which mod I should be getting. My biggest concern is falling off the wagon again, and having the same problems as before which made me leave. Mainly leaky tanks and bad atomizers. I’m hoping the quality control has gotten significantly better.

Anyway, I’m super excited to be back with you guys! Say hi if you see me around!  

Okay, so my partner and I have used the same Aspire Triton2 tanks for about 5 years now. They were never leak proof, but lately this problem has been getting worse and I am trying to see if the market has something better to offer. Other than the leaking problems, the Triton2 has been great. Here are some desired features that I hope to find in selecting a new rig: holds at least 3ml, long lasting coils that are affordable (around $3 ea), replaceable O rings would be nice, manufacturer that is not a fly-by-night, and hopefully leak-proof. Also I should note that I currently use 0.3ohm coils @ 38w and really have no need for very high wattage vapes.
If anyone knows of some tanks that fit the description above, I would be grateful for any suggestions on what to shop for.
Thank you and have a great Thanksgiving weekend!
~Starfield~  

So I have been vaping since 2010, and still use my original REO's with a RBA. Back in the day, I would gift a new vaper with an ego to get them started because it was cheap, simple, and had just enough battery life to not have to recharge constantly. Also, it was easy to switch out attys and try different flavors without worrying about leaky tanks.

I met a young man who smokes 2 packs a day menthol, and is really open to switching. I have a pretty good supply of various flavors of 24mg 80pg/20vg liquid. What can I get him that will make it easy for him to start now (and isn't beyond my ability to help)?  

So, like everyone else, I have my preferred juice (extremely complex DIY with all NET flavors) and my preferred all day driver (Subtank Nano and an Ego One 1100 mah battery). It's performed GREAT. I use prebuilt OCC coils and I rebuild those coils, too. Most of the time, they work just like they do with any other rig... they hiss (like all atomizers) and pop and crackle... part of the nature of sub ohm vaping (I use the 0.5 ohm heads, btw).

Once in a while, the stars align and the vaping gods smile down, and NO popping. I have to actually fire the device for a while to make sure it works. The telltale hiss is there, just no popping. It's happened with prebuilt coils and coils that I've rebuilt. Not sure what the deal is, but the vape is SOOOOO much better.... flavor seems improved too, but it might be mental.

Whatever the case, thank you, vaping gods, stars, fates, or whatever. That occasional perfect coil is nice.  

Hey there guys, new here.

I have a Vappresso Revenger Mini kit and I have upgraded my tank from NRG SE Mini tank to a "Geekvape Z Sub Ohm tank(Much Larger Tank)". Because I wanted to taste more flavor and still blow lots of clouds in the air with my vaping device being fairly cheap.
I put a New Geekvape Z series coil 0.4ohm 50-60W because I burnt my original 0.2 Ohm coil , I wont talk about my previous coil. I'm getting 2 problems here.

1. I'm using 60W, normal setting and every time I vape or inhale I get a taste of E-Liquid in my mouth. However its blowing perfect clouds and still getting an amazing taste but its just that the liquid drops in my mouth. I just want to spit it out every time. How do I fix that problem?

2. The other thing is if I use Higher Wattage and High settings the liquid pours out of the air flow and starts leaking and backspits in my mouth.

(Before I vaped with new coil)I put the new coil in, I soaked it for 10-15mins, while I fill half tank of E-liquid which is 0.8Ng/0.2PG. Then I inhaled 3-4x with no button pressed. Then I vaped to test, still leaking. I set the vape to 70W and high setting then blow downwards into the device 5-6x. All I was trying to do is desaturate it. My results got better didnt notice much of a leak but I still get a little bit of liquid in my mouth. If you can help me out here, I would much appreciate it.

Thank you and kind regards

Tuatara Vaper  

Recently I am thinking and about to make a decision among these pod box:
SMOK RPM40
Voopoo Vinci R and Vinci X
GeekVape Aegis boost
OneVape mace55

Seems that everything is ok with all of them.

The thing is, shoud I buy these for MTL or DTL? Anyone have the same confusion?
Let's talk about this, I think if one likes MTL in daily life, he/she will probably not to switch to DTL, right?  

Hello all,
I’m sure this has been discussed before as this is not a new tank, but after doing a search I didn’t find an answer. I also didn’t find much help on YouTube. I just pulled out my 2k18 doggystyle (I think that’s the correct version, it is a top fill) and built and wicked it. It has been so long since I bought this and read up on it, I don’t remember any of the tips and tricks.
As soon as I adjusted the airflow, ejuice started leaking in large amounts out of the holes. Luckily I was able to salvage most of the juice as it was premium juice I just bought from a store (not diy). What did I do wrong? Is it a wicking issue or is something else wrong? Any suggestions are greatly appreciated! Sorry if this has been covered before, but didn’t know where else to ask and I want to get this tank to work.