What's With Newer Flavors And Sub-ohm?

Im pretty much freaking out right now, I have been vaping the same juice for 7 years and I just received the 3 bottles that I ordered and I went through 8 coils thinking I had bad coils, well it wasn't the coils I went and smelled my juice and it smelled like a burnt coil with a mix of burnt plastic. I called and they said they didn't change manufactures so I'm assuming something went wrong in the lab. Anyhow I have 1 good bottle left and that's only 30ml, I vape USA #1 from Ecig pros and hopefully they fix it otherwise I'm going to have to wait until they get there next batch which will be a while, because they just got this batch. So I need to find a new juice to vape for now, I prefer max Vg and tobacco flavors but not with the Carmel or dark colors. I love a little nutty flavor, so please can you give me some names juice and where to get it. Also I don't do the salt nic. Thanks so much  

Well, over the time all changes, even the beloved habits and hobbies, so is vaping, I do remember when I did started, a bit confused, a bit scared and with some doubts, then enjoyed a lot RDA’s, rolls, making coils and all those new things that changed out the habit… for example to switch the cigarettes pack and light on your pocket for a vape mod and maybe a juice bottle too,

so at the beginning I did used some sub-ohm tanks, then moved to RBA’s…. oh boy, the RDA’s, the coiling art and wicking, what a times on some stores, talking, vaping having great times!
Then, the need of more liquid, the hassle of dripping and there were no squonks available… so, decided to try RTA’s, oh what a wonderful land, tank capacity and dripper alike sensation, draw, flavor and vapor production..

Then… maybe a bit late, started using more mtl rta and pods, the vaping sensation changed a lot, I was maybe using 120ml per week on RTA’s and seldom a RDA, the liquid consumption reduced that much that I maybe use 10ml per day, 25max on a hard stressful day, the salt nic consumption raised when started using salts on TC mode with a RTA mtl and single battery mod,


How have your vaping habits and hobby changed, has It been affected by new devices and new trends?



Regards,  

Hello knowledgeable guys and gals of ECF!!!

I like to switch flavors a lot, perhaps a little to often. I have read here that flavors can linger within the wicking material for quite some time. So long in fact that my habit of switching flavors doesn't provide enough time to work the old flavor out entirely. I have a bunch of extra coils for my nautilus mini and my Subtank mini. For accurate flavor I will switch out a coil for a flavor change. So I essentially have a coil for each flavor.

So here is my question!

How can I properly care for, or store these coils when they are not in use? Right now I have them sitting in a little dish of water so the juice doesn't dry up and gunk them up. Will this method harm them? Can I leave them in the water for a day or so, perhaps a few days even?

Thanks for taking the time to read this! I hope I'm not damaging my coils!  

Well, I just found 3 liters of 100 mg Throat-Hit Nic from Vapers Tek purchased in 2016. Of course they are still in their original plastic bottles. Uuuuug! The bottles are a not a hard plastic but instead pliable and appear to block light as they are a very dark brown color and on the bottom is stamped PETE 1.
What do you folks think? Keep em or chuck em?
It is a lot of NIC, at least for me... hate to check em, but if you think it's the way to go then so be it.

Thanks  

I've had the same exact set up for about a year and a half now. Itaste VTR + Aerotank with 1.5 ohm coils, and i vape at 9.0 watts. I tend to only vape one specific brand/flavor, I'm one of those weird people that just like one thing and stick with it. Up until July last year, i used a local vape shop's liquid. I liked it and it was fantastic. I'm a little fuzzy on their ratio, but I believe it was 70/30 pg/vg. Their liquid would never pool under the coil and my coils would last for over 5 weeks at a time. Then i moved. The cost of their liquid plus shipping was just too high, i was already paying 22 bucks for a 30 ml plus shipping on top of it was just killing my wallet. I found a couple other sources of liquid, one on the net being Apollo ecigs, and the other being local B&M selling VGOD liquid. Both of those i believe are 70/30 vg/pg.

Now since the switch to either of those 2 liquids, my coils are only lasting 5 days tops, and at nearly 2 dollars a pop, its killing my wallet even more than with the liquid i was having shipped here from that local store in FL. What is going on? Is that ratio of VG/PG killing my coils? Its not so much that the coils are burning out, but i just keep having to take a harder and harder draw as the days go on. When its a fresh coil, i get tons of flavor and good vapor, but towards day 4-5, flavor minimizes and vapor decreases. I've soaked them in distilled water and let them dry out, but even that the flavor/vapor tends to peter out after a day or so.

Thoughts?  

Hey, everyone. My gear: MVP, EVOD batteries, Mini PT3, Nautilus (new BVCs) tanks.

I want to be able to vape the dark, creamy, butterscotch, custard, and tobacco flavors that I love so much, but recently my two vape setups just taste terrible no matter what I do. I've grown sick of the sugary, fruity flavors that only seem to work in my setup and so I type this with a lip full of Copenhagen and heart full of regret (I was tobacco free for almost a month). So, what setup can you recommend so that I can get back to vaping those thick, dark juices? I will try RDAs if it is the only reliable way.

Thanks.  

Hi, despite all the info on the internet these days, I ve been unable to find an answer to what is the life use of a wire on a rta coil (not the cotton or liquids) before it gets exhausted and become a bad element to health, maybe to the point of releasing metal particles that could go into the lungs... I know this is highly relative and depends on what kind of wire, liquids and vaping frecuency, but if I give you a straight case, maybe I ll make a good relation between other materials and their durability. It happened that during 2020, with the pandemic on full first impact, importations were very slow and in some cases, closed for long periods of time, I was trying to get some imported wires but I didn't have enough luck to find those I needed, just very thin wire for mtl equipment, which I didn't have. All was sold out from vaping websites... I ve managed to get a Zeus X rta and with it, the included premade coils (I think these are Nichrome)... Thing is, I used the same (and only) metal coil for almost 6 months, obviously replacing the cotton when needed (I had all the other materials, bags of cotton Bacon, tools, fresh liquids, etc), the liquid I ve been using is Don Juan sweet tobbaco and reserve, from King Crest. In those six moths I didn't vape all days or weeks, since finding or importing liquids were also a problem, so confinement and the lack of products, push me to smoke again, sadly, but I didn't give up and I start to build again the coil meanwhile the purchases arrive from other countries. The metal coil doesn't seems to be exhaust in plain view, it gets datk or black, as normally should be after several days of use and when tasting a bit burnt, but once I clean up with a brush, water and some short dry burning when building again, it gets back its grey metal color, not the same shine as a new one, but close. My vaping frequency was sometimes in chain, due to anxiety, but not all day or days and I was careful to rebuilt often. Mods are one Aegis X and one Smok P3, wattage I use is between 40 and 60 because even if the coils can be auto detected and suggestion is 75w, this is always overrated and burning taste triggers in 3 days. Only thing I did notice was sort of a metal taste for a period of time, that after went away and never got back. If someone wants to drop an answer, be welcome please, thank you all...  

I have a bunch of eliquids that have gone much too thick and dark. The only thing I can think of is to maybe buy some pure PG to thin them out.

I estimate maybe I should get 2 120ml bottles of PG. Does anyone sell small amounts of PG like that?

The question might be moot at any minute, but it would be stupid of me to waste all the open eliquid bottles I have at a time like this.

Is there anything else I can do that might help? I keep wasting coils prematurely when I try vaping any of these.

My eliquids are stored in a bag in the bottom of the "smoking cart" so they aren't really in the sun very much. TIA

Sent from my Nokia 6.1 using Tapatalk  

Does anyone ever get a cold sensation when they inhale normal air?  

First off, I would like to say that I’m very new to vaping. I started off with a JUUL, then a Smok Novo 2, and eventually got sick of buying pods.

Now I have a Hellvape MD, and an Ares 2 - the first provides better flavor, but it’s still not comparable to what I was getting in my pod systems. I just recently purchased a BP Mods Pioneer, and I’m hoping that gives me better results. I’m using an Aegis Mini for a mod.

I’m trying to figure out what I’m doing wrong, because it’s really frustrating to spend all this money for worse flavor, when I was hoping it would let me save money.

I have about 40 bottles of salt nic flavors that are 50 or 35 mg, and a couple 3mg freebase I bought (120ml for $7 seemed like a steal). I would really like to get away from the salt nic, but I seem to get even worse flavor from the 3mg.

I’m using 2.5ID 28ga SS316L round wire from Master Wire Supply (I have a spool) with Puffs Organic Cotton. My coils are usually .7ohms, but I’ve tried up to 1ohm. I’ve also tried 1 ohm Vandy Vape Superfine MTL fused claptons, and experienced similar results.

I’m using the MD with the most restrictive airflow settings (3 small hole airflow disk), low (2-3) adjustable AFC setting. I have my coil as low as possible to the airflow, and I have thinned / fluffed my wicks.

I haven’t tried adjusting the airflow below the coil on the Ares 2, because the video instructions say wide open airflow below the coil is the best for flavor (I have found the opposite to be true for the MD).

Can someone provide me more insight?

Will 2mm ID coils with the same amount of wraps taste better than 2.5? Do coil ohms do anything for flavor, or does it only change how fast it heats up? Will I lose flavor if my coils hang outside the diameter of the airflow disk?
Is there a certain type of coil that would give me better flavor than regular round wire?

I use TC at 420F 20 watts


Any kind of feedback is appreciated and if I left anything out or you have questions about my set up that could help me out please ask! I’m at a loss on what to do, and it seems like no amount of research is helping