Voopoo Caliber

I'm a little late to the drop-in PNP coil game, I just got Wotofo's SMRT PNP rebuildable coil system and I LOVE IT. I've always been an oldschool rebuildable, low ohm, high watts, big hot vapor fan, and extremely skeptical of the replaceable pods because, let's be honest 5 years ago they didn't hold a candle to a plain'ol RDA that you have to spend 15 minutes building and getting just right.

Well the PNP coils have me kicking myself for not trying them sooner as they produce 95% the same amount of vapor of a *perfect* RDA build, but with 10x better warmth and flavor.

So I'm wondering why the heck other companies besides wotofo aren't upping the anty and making better PNP coils like Wotofo (the Voopoo ones are great, but Wotofo really outshines them with their rebuildable mesh-style pods). I would easily pay $20 for an Ohm Science pre-made Alien Clapton pnp pod or something a little more intense. Since you can put these PNP'S on an 80+ watt mod, there's a world of possibility for plug-n-play cloud chasing if you want, and I think there's some financial incentive for that.

Does anybody know where you can maybe buy some blank wholesale pnp shells because I might try and make my own if no one else does!  

Hello!

I've started to vape more than a year ago with eGo AIO e-cigarete and now the battery has almost dead. What I mean with "dead" is that it is dead while at 50% charged and I feel like it will die in a couple of days or weeks. So now I'm looking for a new vape.

I searched on the internet what would be a good vape mod and found Eleaf. It seems a lot of people enjoy and are satisfied with this brand. I also looked into SMOK mods but looking at internet reviews, they say that it is not the best mod for long use.

So in my case, I've found to choose between...

1) Eleaf Istick Pico S 100W
2) Eleaf iStick Pico 75W

I also listed these since the shop I'm going to buy include these but not sure if these mods will be any good to be in the long run.

3) SMOK SPECIES 230W & TFV8 Baby V2 Starter Kit.
4) Smok R-Kiss 200W
5) Smok X-PRIV 225W
6) VooPoo Drag 2 177W
7) VooPoo Drag Mini 117W

The question is... from what of the all listed mods should I buy? Would be good if anyone shared their own experience with these listed products.

I don't need to puff big clouds and stuff. 30-50 W is good enough for me.  

I've been using only twin-18650 mods for some time, and before the shipping ban came into effect, I bought a backup of my most-used mod (a Geekvape Aegis X), but since the 100W single 21700 / 18650 Voopoo Drag X Plus was only $35, I also picked up one of them as another backup.

I vape exclusively on RDA's, typically with a 3mm dual coil twisted build with 24 or 26 gauge Kanthal or nichrome-80. 5 or 6 wraps with 24 gauge, 6-8 wraps with 26 gauge. I typically vape these between 90 and 110 watts.

I did not expect to get a 'true' 90-100 watts out of the Drag X, so I set a target of around 60 watts. I mounted a 3mm dual coil twisted 28 gauge build with 6 wraps, which on my Aegis X vapes great at 60 watts, and very good at 50 watts. It measures at 0.45 ohms.

But on the Drag at 60 watts, it only vapes at what feels like 30 watts on my Aegis. Setting it higher makes no difference either, it seems to 'top out' at ~30 watts regardless of the setting. 60 watts @ 0.45 ohms is only around 11 amps, so I doubt I'm hitting an amperage limit.

I am using 18650 batteries (VTC5A), and it is about time to replace them, as I am only getting around 70% the battery life as I did when new. I will be picking up some 21700 batteries at the same time, which hopefully help with things on the Voopoo.

Does anybody have any good experiences with ~60 watt builds on a Drag X Plus?  

I recently got a VOOPOO mini. Came with a small low wattage coil installed already. Used that one and got great flavor. Just went thru 2 N1 coils. Terrible burn and horrible flavor. I let both coils prime for over 15 minutes and set at low wattage to begin with. I am very unhappy with these coils so far.  

VOopoo is really pushing that ad for Drag S and Drag X. They look sweet. Has anyone purchased one? How do you feel about the pod setup?  

At Element Vape, there are about 10 kinds of coils listed that fit the Voopoo drag x. I'm not sure which one to get but I like mouth to lung vaping so if someone could assist me, I'd appreciate it.

Also, if I am using the device for mouth to lung vaping, am I supposed to keep the air hole open, closed or halfway? Thank you in advance.  

After Many months of searching, I have settled on my main out and about Mod as an MVP 30W and a Kanger Sub Tank Mini. I still love my e-pipes & drippers at home, but it is really nice just to grab the MVP and go, no extra batteries, parts, juice bottles, etc.

I have been carrying my old MVP2 & a Nautilus as a backup, but the vape and flavor is very different then my main, it really doesn't work as a backup.

After doing a ton of research I have decided that I will be going with the Subtank nano, but I am at a loss for what mod to get.

My only must have is that it needs to output at least 20 watts and stay around $70 or under. I want something smaller then the MVP 30W which is the reason I have not just picked up on of those.

I would like on board charging but it is not a must have.

I am open to either a box or tub style.

i have looked at the iStick 30, but I am not sure the lip on it will look good with the nano.

Okay EFC, let me know your thoughts!  

Okay so not sure if this is the right section or not but its the only relevant place I could find. .

My first build was okay coils turned out fine but the wicking and position of the coils where terrible. So I decided to have another go.

Opinions appreciated.

Using smok xpro m80
Plume veil v1.5 clone
26gauge kanthal
Wrapped around a 2mil precision screwdriver.
8 or 9 wraps can't remember.
And reading at .46 ohms

P.s don't know why the coils look like there glowing purple but I promise their not haha.
 

Hello everyone,

I'm vaping with a Vaporesso Swag and have tested the GT2, GT4, Mesh and Ccell coils so far. I'm vaping 50/50 VG/PG liquid with 3ml/mg nicotine. I always use the coils at the lowest recommended wattage, airflow fully open and my puffs are usually 2 seconds long at max.
Now my problem, I'm going through coils faster than others change their underwear. I'm on my third coil now for 10ml (!) of liquid.
I prime my coils and I let them sit in the tank for at least 30 minutes before I use them. I get muted flavor after maybe 5ml of liquid and it tastes burnt after 10ml of liquid. I've also tried different liquid brands and at least 20 different flavors.
So what am I doing wrong? I'm about to quit vaping because of the immense cost of coils I go through. I just can't figure out what I'm doing wrong.  

I've been out of the small scene for awhile, relying solely on dripping or my latest journey...searching for the ultimate sub ohm tank.

Anyway, my wife has been dipping her toes back in the vaping waters, and I have a Tatroe Tank set up for her on a iStick 20W. The problem she's having is leakage from the coil. We've already got a number of Kanger Protank 3's in the collection...but they are prone to leaking.

What is out there now, tank wise, that offers 1.8 ohm or so range that is pyrex and doesn't leak? Pyrex or SS is a must, as she like high cinnamon juices such as High Caliber's Flame Thrower. She also vapes as if she's smoking...mouth to lung hits. She likes the tight draw that mimics a cigarette, and would rather have the smaller diameter drip tips like those on eGo and Evod style tanks