I have hellvape me RTA and I had some flooding problems and I checked the top fill seal I love the topfill and check it with my mouth and I see that it's not sealing perfectly.... The rubber seal seems to not make perfect contact and I wonder could this cause flooding problems when I leave my vape without using it??? It draw air into the juice chamber??? Also someone here on a thread mention he had 2 hellvapes and when he swap the topfill parts with each other his vape don't leak....should we have perfect seal at the top fill mechanism???
I am having problems with my Hellvape MTL, it is not delivering a good flavor and has juice leaking through the airflow, I am currently using the 1.2 ohm coil that comes with the atomizer, I use juices nicsalt 35mg. I use the 3 holes and airflow in the 4 to 12-14w.
Okay so I bought a pack of 5 coils from FastTech as I needed some coils, they arrived today and well.. they don't really look too good. there like barely any wick on them! and the rubber seal thing on it is tiny.. all I need to do is just look at it and know it's going to just leak and gurgle and ew.
Here's a pic;
Should I put a bigger rubber seal on it? There's barely any silica wick on these things I'm quite disappointed really.. Don't know what I expected ordering from fasttech but not that!
Any ideas on what I should do with these? :/
I'm getting leakage from the squonk bottle on my Asmodus Luna. The leak isn't from the bottle itself, but from around the cap and the sealing points. The cap is delrin, and I want to seal it all off at the sealing points, cap to the bottle, around the outside where the feed tube comes out of the top of the cap. I fill thru the 510 so won't be taking it apart once installed again. I'm thinking of aquarium sealer or this: Clear Silicone, Waterproof Sealant, Aquarium Sealant from Loctite Adhesives
Do you think it will hold up to getting nic on it?
The coolfire z50 kit is the vape device that helped me quit smoking and start vaping one year and one month ago...it was a good choice cause I had no problems on my first vaping steps making the transition pleasant...
The z80 kit seems an impoved version in every way from the great z50 kit in my opinion...
Removable battery is always good to have....bigger size make it better to hold in the hand...very lightweight but also feels sturdy....great machining always from innokin and buttery smooth threads on the battery cap...
I still don't know if the Fourier vape tech with the new board can improve the coil life or the refresh makes any difference but I always like to see innovation and the mod performs very good that's for sur....the z coils already for me are great coils and very long lasting anyways ..
I also saw the 0.8ohm coil has bigger juice holes now!!!! I don't know since when this happend cause i have a stock of older coils and I also rebuild them...
I always thought the juice holes were kinda small for the 0.8ohm coil and sometimes on colder temps it couldn't keep up to wick 70vg juices in my opinion if u chain vape
I am very happy innokin doesn't settle and still making improvements and fine-tune their coils even tho they are so successful...
The zenith 2 is an improved zlide tank in my opinion maybe they chose to name it zenith caus the old zenith is a legend hahahaha
In fact is so similar u can swap the bottom airflows from the zenith 2 to the zlide if u wanted
its same dimensions as the zlide if u don't count the curves on the airflow ring and topcap,those curves btw make it look soooooo good
....it has wider chimney inner diameter that helps for direct lung vaping and it's not much bigger to affect the mouth to lung flavour in my opinion.....
it also comes with larger juice capacity cause the twist topfill mechanism that borrowed from the zenith takes less space and makes the tank be able to hold more juice than the zlide on same dimentions oh yeahhh....
the new airflow system is perfect....with small holes to be able to fine tune mouth to lung from tight to airy and a big slot to wide open and vape direct lung...
In my opinion is not just restricted cause it can be almost as airy as for example the hellvape destiny rta that is single coil direct lung rta.... The zenity 2 can supply the 0.3ohm z coil with all the air it needs and Vapes great...something that the zlide couldn't keep up...
My English not good but hope u guys understand....
I have question...I am gonna talk about rtas....soooo we got the air flow part of the tank when is the coil and that we suck air through it...and there is the juice part where holds the juice....and thing that seal the 2 spaces is the cotton....the juice reaches to the coil throught this capillary action I guess...I was thinking tho while we suck don't we create also vacuum and draw more juice if the airflow can't keep up with our draw?? And if that's correct then...this space that holds the juice should be sealed good so that it can't draw air lets say for example from the top fill cap and then push more juice into the coil cause it will have the atmospheric pressure?? Or maybe it's the opposite and the vacuum we create while we puff should get lose over time while we don't vape??? I am trying to get more understanding about how stuff works hope makes sense and someone can correct my mistakes and make things clear for me
Some of you may be familiar with the problems I've encountered the past couple of months trying to find a vaping unit that works well for me. I think my problems are solved. I've been using a Joyetech Egrip for two days and I'm thrilled and delighted. No tanks to fool with, it's built in. It gives a wonderful smooth hit. It's 20 watts and you can actually vape at full 20 without worrying if your coil is going to fry. You have to use the replacement coils, 1.5, designed by Joyetech, can't use generics. It holds almost 4 ml of juice so you can fill er up and you're good for the day. I could go on and on, but suffice to say this little unit is AWESOME. If you're into simplicity, not into building your own and fooling with a lot of different tanks etc then you should check it out.
Its $69.99 everywhere except I found one place selling it for $49.99, Vape NW. I just ordered a second color. They also sent me a 17 ml bottle of juice (I asked if they could send me a "sample" of one of the juices they carry.)
Hi,
I just bought a litre of 100mg/ml unflavoured PG E juice.
I calculated that if it doesn't go off it should last me 10 years. It came in a sealed plastic bottle.
I bought a dark amber glass bottle (which I have sterilized) to put it in but I was wondering if it would be better to leave it in the original sealed plastic bottle rather than breaking the seal to put it in the glass bottle? I took the lid off and it has a proper seal over the rim of the bottle like a Gatorade.
Also the glass bottle I bought came with a plastic lid but I doubt it will be 100% airtight.
Thanks for your advice, any other tips would be much appreciated.
Hey there guys, new here.
I have a Vappresso Revenger Mini kit and I have upgraded my tank from NRG SE Mini tank to a "Geekvape Z Sub Ohm tank(Much Larger Tank)". Because I wanted to taste more flavor and still blow lots of clouds in the air with my vaping device being fairly cheap.
I put a New Geekvape Z series coil 0.4ohm 50-60W because I burnt my original 0.2 Ohm coil , I wont talk about my previous coil. I'm getting 2 problems here.
1. I'm using 60W, normal setting and every time I vape or inhale I get a taste of E-Liquid in my mouth. However its blowing perfect clouds and still getting an amazing taste but its just that the liquid drops in my mouth. I just want to spit it out every time. How do I fix that problem?
2. The other thing is if I use Higher Wattage and High settings the liquid pours out of the air flow and starts leaking and backspits in my mouth.
(Before I vaped with new coil)I put the new coil in, I soaked it for 10-15mins, while I fill half tank of E-liquid which is 0.8Ng/0.2PG. Then I inhaled 3-4x with no button pressed. Then I vaped to test, still leaking. I set the vape to 70W and high setting then blow downwards into the device 5-6x. All I was trying to do is desaturate it. My results got better didnt notice much of a leak but I still get a little bit of liquid in my mouth. If you can help me out here, I would much appreciate it.
Thank you and kind regards
Tuatara Vaper
Sooo last weeks I was able to wick my atty in a way that for me it's perfect...no dry hits no leaks or flooding or anything and I enjoy Soo much...
After vaping some strawberry cookies and chocolate....(very dark juice coil abuser) it was rewicking time...
Put fresh cotton and start vaping and dammm bad taste....dry hit
Tried make it work...nothing...
Ok let's rewick...again same dry hit
Not anything crazy but just that light dry hit bad taste....
After rewicking 3times and using almost no cotton hahaha I was like ...... Cant dry hit now
TURNS OUT IS WAS A JUICE I BOUGHT ALREADY MADE...WAS CUSTARD CARAMEL AND SOME CEREAL STUFF TOGETHER OR SOMETHING
THIS THING TASTES LIKE DRY HITS!!!
WHAAAAAAAAAAAAAA not exactly same taste but was very similar EWWWWWWW
I AM SUCH A NOOOOOOOOOB
anyways that's all....I make my own juice just forget my bottle and I was at work so I bought a juice from a store nearby
I know a lot of people, particularly those using higher PG mixes, tend to use open airflows. However, coming only recently to vaping from long years of smoking I still pefer my draw to be a little tight. I very often find myself using the lowest possible airflow. I usually vape a 60/40 or 50/50 PG/VG ,mix. Now my question is - am I maltreating my coils, am I flooding them and shortening their life? I ask because I went through two coils in as many weeks on my Kanger Geni. They may have been born under a bad star and if that is the case I will take it. But if I am doing something wrong I would also like to know and be advised about it. Thanks.