New Spinner 2 Burnt Taste Now

Just two questions.

Ive been using a Vision spinner 2 1100Mah for a long while now with a Kanger Aerotank V2 which has been very good and reliable.
I recently got a Kamry E pipe as a gift. The Kamry takes a 18350 battery.

Problem is there isnt a lot of difference in vaping between the two, this is with the same tank with the same coils on both. Is this normal? If anything the pipe loses vape sooner due to battery drain than the Vision Spinner 2. Is there anything i can do to beef up the E Pipe for a better throat hit and more vapour?

Which brings me to question 2.
Is there a good upgrade to the Kanger Aerotank? I want a new tank anyway to replace the stock Kamry one which is top fed and tastes burnt quickly, and i dont want to keep changing out tanks between the Kamry and the Spinner hence i need a good, ego threaded tank for the mech pipe. (Kamry k1000 is 510 threaded but i have a 510 to ego adaptor too)
Thanks in advance  

Hello vapers! first! I'm a noob at this stuff because I just buy my tank and use it with the coils it comes with and second, my english isnt that good but I can understand it perfectly fine.

Anyway, Ive been searching everywhere but I couldnt find a solid answer to my question.
Im using an Aerotank Giant right now with a 1.8 ohm coil, if I put a 1.2 ohm I would have to use less voltage because I get a burnt taste and the coil burns pretty quick, Im about to order a Sub ohm tank soon and I'll use the stock coils, the one im getting is the Kangertech SubOhm tank.
Why do subohm coils use more voltage when normal coils use less?

I mean, Ive seen people do things like 0.2 ohm coil @ 100W + If I did anything over 3.5V on my 1.2 ohm coil itd burn instantly... SubOhm takes more voltage the lower you go and normal dual coils take less voltage the lower you go!

1.9 Ohm Dual coil = 3.7-3.8V for me
0.5 ohm OOC subtank sub ohm coil = 12-30W?!

Thanks in advance for taking the time to reply to this post and your patience!

Cheers!

Edit: by the way, Im planning to use my subtank with a 50/50 PG/VG 16mg nicotine, Is that ok?  

Uhh...so idk what it is,tasting burnt no matter what ,new coils ...two different rba pieces for subtank mini...guys at local vape shop didn't taste it but I notice a flavor of burnt n not juice...tht was hours ago,just tried again few mins ago and not burnt,but why would it be like tht? If a bit more cotton would it b better? But then I get juice...less cotton I get odd taste...I can't win lol idea on y it's like tht? Rba's r both fine.  

I'm currently using a Vision Spinner battery with a few ProTank mini 3's (Which look quite nice together infact - so long as the battery matches the tank). I'm wondering what I should upgrade too.. I'm not really looking to get into mechanical modding yet as I'm not made of money. I'm more or less looking for a better battery with a better lifespan, I'm having loads of problems with my vision spinner and I'm looking for something that could replace that.. Anyone have any good suggestions? Thanks!

Edit; I found this: Aspire Premium Starter Kit [VE754-B1] - £49.95 : Vape Escape and was wondering what your guys opinions are on it  

I'm having trouble with my Jem Pen E cig - hopefully someone can help me.

I take the coil out clean the tank and battery area, put it back in with liquid + prime the coil. for about 5 minutes it tastes fine and is vaping as normal. then a really horrible burnt taste comes in which is unbearable to smoke and making my throat hurt.

I take the coil out and clean again, put more liquid. the same thing happens! it tastes absolutely fine again and then gets burnt.
any idea why this is happening ? the device gets quite hot too...
i don't think the coil is the issue because why does it taste fine for a few mins?
I've ordered new coils so going to try that but worried its the device. i've only had it for 2 weeks and changed the coil about 5 days ago.  

I've got one that has me puzzled. I went through two fills of my Aerotank V2 with Cosmic Fog's Milk and Honey when it started to taste burnt. I figured no big deal, let me change the coil and clean the tank and all will be well. Well, new coil and cleaned tank and about 4 drags in it tastes burnt again. Thinking maybe I have a bum coil I try another one. Same deal.
I'm at a loss. It's the same bottle of liquid, same tank (cleaned each time), same battery (iStick 50w), same wattage (8.9), same resistance (1.2 ohm). Anyone have any clue what's could be causing this? It's getting expensive in coils and liquid!

Thanks  

Im new to external battery mods but have been vaping for 3 years and I know how to prime a coil with e-juice. I go the extra mile after I prime the coil and let it sit for a minute. Then I fill up the tank put it back together and do not touch it for at least an hour or two just to make sure. I just got my now verified as legit sigelei sobra with the moonshot 120 both of the coils from that taste like those knock off BS eBay fake coils. I started off at a very low wattage and I don't know what's wrong both coils are disgusting. It's not exactly a burnt taste or a dry taste it's like a sour off taste and I can't use them. It also makes me feel like I have something in the back of my throat. What in the heck is going on? Do these coils take awhile to become usable? They're the coils that came with the mod and I verified the mod so I assume the coils are also okay. I even went so far as to try the second coil on a different mod but with the same tank just in case the mod was frying things the very first hit. Can anyone give me an idea of what's going on so I know what I need to do and also if anyone could tell me whether or not the Cascade baby coils will fit in the moonshot 120  

hello vaparoos,

I have a friend with a spinner 2 and she wants to know the best tank with the biggest airflow she can put on it. she would like to produce more vaper since she has been hogging my mvp 3.0 and my subtank. she doesn't want to invest in a mvp or anything bigger but she does want more vapor ...

what do you fellows suggest, in my opinion and correct me if i'm wrong any tank can fit over a spinner even tho its not a 510 connection. will this work?

thanks
angele  

Hi,

I am currently using two different Vision Spinners (900mah and 1600mah). Both are variable voltage. I have paired the spinners with the Kanger2 Mini protank.

I vape at about 4.3v. I use 1.8ohm or 2.2ohm coils. I have been happy with the result so far.

I am not interested in a big old MOD or anything. I like the pen-like style.

I bought an Aerotank Mini that turned out to be a clone and it didn't work. Maybe it came with a bad clone coil? I don't know.

Any suggestions on updating the mini protank 2 and the Spinner? There are just way too many products and I have no clue where to start. The short life of the Kanger colils has been pretty annoying. I read they have better coils now for the Protank 3.

Anyway, thanks for any input on this!  

So I purchased the eGo One after hearing amazing reviews of the device. I use an Aspire Atlantis on an MVP 3 but needed something more portable for work/going out. I was more than impressed with the eGo One using the .5 ohm coil, and equally so with the 1 ohm coil. The battery life is great, the flavour is perfect and the vapor production is unexpected. However, within 2 hours of using the .5ohm coil, the vapor began to taste burnt, more than on any other wick I have burnt. So until I could get hold of another I used the 1 ohm coil. 24 hours that one lasted. Joyetech said they would send me replacements free of charge, but while waiting for this I went to my local shop and bought another .5 coil. 1 HOUR LATER, it's frazzled. Wether I'm just being unlucky or the device is faulty I don't know, but I am incredibly disappointed. It's not through a lack of priming or using the wrong liquid, I'm an experienced vaper and had fully primed the wicks for 20minutes minimum and was using a 50/50 juice. This device had great potential, but it will be going in the bin for now (except the battery, which even does a great job on my Atlantis)