Rtda Vs Subtank

my wallet is hurting with all the juice im running through...

Not to mention all the wasted juice whenever I screw up an rdta..  

So I decided to get another clearomizer and the Donner by Amigo Itsuwa is what I got to replace my Aspire Atlantis.....
So here are my thoughts on it and it's just My Opinion:

Holds 4mls of juice - holds more juice so I'm not refilling my tank 2-3 times a day
.50hm Coil head is cotton & Kanthal wire & a wire mesh around the opening for better wicking ( You can use Atlantis coil in this thing and it's better in this tank then it is in the Atlantis) It comes with 2.
There's no notches or trying to center the coil head. It sits in the Clearo and just sucks juice lol
Great Flavor sub-ohm - The flavor you get from this is amazing, I was a little taken back bc I chose a sour raspberry and it really was more sour tasting then in any of the other tanks I had the same juice in
I personally like the drip tip but it's not for everybody
Adjustable air flow control is a wide slot - It's a slide around, but the draw from almost closed to full open is nice any way you wanna vape.
Vape production is great I use 10/90vg - 20/80vg


There are some things I don't like about this tank...
Priming the coil is a process - on a fresh coil the directions state to drop a few drops onto the coil, then once tank is filled let sit for 1-2 minutes prior to use. On your second fill of the clearo you have to let the coil sit for 2 minutes b4 use....I kinda wanna fill and vape, not fill and wait
Holding 4mls of juice is great, but if you can't vape 1ml of juice at the bottom of your tank it sucks. You can't vape the last ml of juice because the coil head sits to high so it can't wick the remaining juice.
I did find that when I put the Atlantis coil head in that the wicking was alot better then the coils that it came with, now this could be bc I am using a high vg juice.

So let's talk price....I bought this at a B&M so I paid A LOT more then what I've found online.
My price was $45.00
I have found these online for as little as $23.00
and for this price I would probably buy it again, not for $45.00
Iv'e been vaping on this for about a week now, I've gone through 2 coil heads in 4 days & now put the Atlantis coil head in it and am having better luck with it.
So there's my thoughts on my new clearomizer.  

Hi friends. It's been awhile since I posted a thread and thought this might be a fun topic. I will go first. There are a couple things I really look foward to regarding my vaping. The first thing is when I get a new RBA. I can't wait to get in and build that new tank. I track the package and it's like Christmas when it arrives. The second thing is if I order a new juice! I usually make my own juice but I will also buy a couple each month. Oh I can't wait to break into that new bottle of juice!! Those are a few of my favorite things. How about you??  

I have my istick 50...have been using the subtank mini with rba n coils close to bout 1 ohm,good enuf,but get several burnt tasting hits,so local vape guy hooked me up with an dripper ..coil is .3 (need a wider bore tip now tho)nd I don't know what is wrong here but I'm using a 12mg juice nd not rly getting any vapor nd am coughing.I'm still getting the peach flavor he primed the cotton with n not my sugar cookies ..I'm not sure yet the 12 is too strong nd I don't want tht to happen cuz as of now all I have is 12s with 6more I've ordered on the way.Definitely not getting burnt taste but idk.do I need a higher wattage mod? I don't care for clouds but I'm getting real small ones right now which just doesn't seem right. .3ohm 50w(being the max) 12 mrgoodvape moon sugar juice...feeling lost here...not at the shop now nd he's very informative but I feel like I'm missing something,he built the coils n set the drip up for me nd it's all fine,idk maybe for a drip I need over 50w n less than 12mg....I have a 6mg of the same juice just in case as well tho too so...absolutely new to dripping but not sure if it's my device needing to b higher capable or what...which is why I put this in general vaping n not rebuildable anything forum cuz I'm generally looking for ideas on juice mg the bore of my tip,power of device,so it's multiple things on my mind...ideas plz  

So I recently gifted a friend of mine who is still getting his feet wet in the vaping world a Kangertech Aerotank Mega, and for some reason, he thinks you can fill it from the top, which I told him you definitely can not. I'll post the exact conversation here.

Him: you can do that with the Aerotank Mega too
Me: You can? I don't know about that.
Him: yeah but you have to be careful how full you fill it, of course.
Me: No. It's a bottom fill. The only way you could fill it from the top is if you only do it like halfway, due to the chimney being the way it is.
Him: then the mouthpiece part shouldn't be able to come apart from the tank, but it does, it's not even glued together.
Me: Yeah. That's called a drip tip. They're interchangeable. Your T3D is like that, too.
Him:
yeah, but with the T3D it's a seperate part that comes off, and doesn't leave the top of the tank exposed.
on the aerotank mega it's all one piece. either way, you can still only fill it so full from the top or bottom because of the center hole. it still holds a good amount though.

So, yeah. I'm pretty sure the only way you could possibly fill it from the top is if you took the top half of the chimney off and filled it that way, since the chimney is kind of in two pieces, but then you could only fill it to the spot where the chimney splits. Anyone who can definitively settle this for me?  

I've searched the forums and really couldn't find anything spot on with the problem I'm having, but if there is something I missed please forgive me. Anyways Ive been vaping for about 2 months now. I've had no problems with coughing and not being able to Vape up to now. I was using an Aspire Nautilis mini, and I decided to get a Kangertech sub tank mini. This is where the problems have begun. I'm coughing like crazy with this thing. I've done mouth to lung hits, let the it sit in my mouth before inhaling and still cough like crazy and it's only with this subtank I'm now using. I was using the 0.5 ohm coil that was on the unit. I switched to the 1.5 to see if that helped and it didn't. I've adjusted air flow, played with wattages and voltages and really no help. Is there a reason this is happening? What would be the cause of me having a coughing fit only when using this subtank? By the way I'm using a 50/59 mix of e juice.  

I always get juice from juice Mafia, my local brand..... well this time I got 100% vg no nic juice in Arctic Ice because I got my girl a new tank to use as an e-hooka. The strange thing is the juice is crystallizing both in the bottle and in the tank. It also is getting really cloudy, but if I leave it say in the sun warmed window of my car the crystals seem to melt back into juice. Anyone know what's going on with this??  

This is bad, and what's worse is I know it's bad but I can't seem to stop. I keep buying mods and tanks and juice and accessories. I've been vaping for almost a year now and for the most part I was happy with my setup (once i got past the cheap ego battery setup I had). I was rockin an MVP 2.0 and a nautilus tank. Loved every second of it. But recently the MVP threads got messed up so no tank would connect to it. So I decided to upgrade my setup and get a Sigelei 150w. Now THIS thing is amazing.

You would think since I was happy with my setup that would be enough. NOPE! I ordered an RDA (Mad Hatter) to go with the sigelei because the nautilus just wasn't fully utilizing the mod. I ordered wire, wick, ohm meter, the whole kit and kaboodle. But I also ordered an MVP 3.0 Pro for the times the sigelei batteries were dead or I just needed a smaller device. Got the MVP in today and it's amazing. I definitely love Innokin products.

That's it though, right? NOPE! I haven't even recieved my RDA yet and I was browsing the interwebs looking at forums and reviews and came across the Kanger Subtank Mini. Looks awesome. So I ordered it. But not by itself, oh no no no, I saw a kit with a Kanger Subox Mini and Subtank Mini starter kit. So I ordered it. Oh god will the impulse buying ever stop!?

Let's not get into my juice collection. I have more bottles than I know what to do with. Originally it was a handful of bottles that could sit on my desk, now I've had to rearrange my dresser so the multitude of bottles can sit up there. I have so many flavors that I love that I keep switching them around and it's driving me crazy. And everytime I see one of you post about your new favorite all day vape flavor I look into it, think it sounds amazing, and end up buying more.

Aww screw it, I love vaping. I'm sure i'll buy something else real soon. Speaking of which...I could use a new drip tip to go with my new tanks. Gotta go.

(thanks for reading my rant)  

Looking for a new non sub ohm tank. I have a few sub ohm tanks and just can't get into it. It's just not for me. I enjoy a flavorful, cooler mouth hit rather than huge low flavor lung hits. I am currently vaping my old nautilus mini and still like it but I am starting to get some chest pains. It may be my juice or just me but something about the coil fill material just makes me uneasy. I'd like to get a tank that performs like the natilus mini but has a better more pure coil fill material. Any suggestions or am I looking for a unicorn?  

If so, please see a doctor!

Sorry. No, what I mean is, every single drip tip I use - and I have quite a few now, from Smok, Kanger, Atlantis - ends up looking like this after a day or so of vaping:





Apologies for the poor reproduction, I don't have a proper camera handy, only my mobile phone whose "macro mode" leaves a little to be desired.

Hopefully you can vaguely see what I mean: regardless of the kind of juice I use - again quite a variety of manufacturers, and a range of ratios from 50:50 up to 80 PG / 20 VG - leaves a crusty residue around the edges of my drip tip.

I find that after 24 hours of vaping on a single tip, it's pretty noticeable, and a bit nasty. I prefer vaping custards and other dessert flavours, but do have a number of fruity juices and they do the same thing. Though I've never watched closely to see if one kind of juice leaves more residue than others, or at a faster rate.

Of course I clean them regularly and it's no big deal really. I'm just wondering if this happens to everyone, or do I have some weird and incorrect method of vaping? Loose Lip Syndrome?