Vision Spinner 3 Problem

Just two questions.

Ive been using a Vision spinner 2 1100Mah for a long while now with a Kanger Aerotank V2 which has been very good and reliable.
I recently got a Kamry E pipe as a gift. The Kamry takes a 18350 battery.

Problem is there isnt a lot of difference in vaping between the two, this is with the same tank with the same coils on both. Is this normal? If anything the pipe loses vape sooner due to battery drain than the Vision Spinner 2. Is there anything i can do to beef up the E Pipe for a better throat hit and more vapour?

Which brings me to question 2.
Is there a good upgrade to the Kanger Aerotank? I want a new tank anyway to replace the stock Kamry one which is top fed and tastes burnt quickly, and i dont want to keep changing out tanks between the Kamry and the Spinner hence i need a good, ego threaded tank for the mech pipe. (Kamry k1000 is 510 threaded but i have a 510 to ego adaptor too)
Thanks in advance  

So hi guys I been vaping since April loven it so I'm looking get something different i got the ego c twist with aspire bdc clearomizer. What should I get next I was looking to get the vision spinner 2 and istick eleaf 30w or should i just get the istick eleaf 30w or 50w. I wanted to get the vision spinner 2 from fasttech with couple of other things but I'm going to get both.  

I'm currently using a Vision Spinner battery with a few ProTank mini 3's (Which look quite nice together infact - so long as the battery matches the tank). I'm wondering what I should upgrade too.. I'm not really looking to get into mechanical modding yet as I'm not made of money. I'm more or less looking for a better battery with a better lifespan, I'm having loads of problems with my vision spinner and I'm looking for something that could replace that.. Anyone have any good suggestions? Thanks!

Edit; I found this: Aspire Premium Starter Kit [VE754-B1] - £49.95 : Vape Escape and was wondering what your guys opinions are on it  

Okay guys, first of all, sorry if this is in the wrong section, was unsure where to post this warning.. I just want to show you guys my experience with eGo chargers.. I'm unsure of where I got this one, I think it came with my Vision Spinner battery, I'm pretty sure the supplier just bundled it with a crappy cheapy one.. Here's what happened to mine:
Imgur

I noticed after a weird flashing occurred on the LED, the battery LED was constantly flashing, I noticed that the plastic had caved in and I thought I had stepped on it or something, but nope! The whole thing was melting and it smelt absolutely horrible, I opened it up and I noticed that one of the capacitors on the PCB had burnt out.. Be careful with chargers and NEVER leave batteries charging unattended, this could've caused a serious problem if it had caught fire.. Please be safe everyone!  

November 20th, 2013, I walked into a vape shop and left with a Vision Spinner 1300, a Protank 2 and a bottle of 24mg juice, and haven't touched a cigarette since! Seven years today!  

I have an orbit cannon vape pen. I believe it's 510 style.

I bought it 5 months ago. I just got around to using it. You press the button 5 times, and it turns on, press it 5 more times and it shuts off. The light also indicates the battery voltage. It turns white when fully charged, and then blue, and then red when it's almost dead. There is also a light on the charger that is red while it's charging and then it's supposed to turn green when it's done charging.

Well, the e cig battery light stays white for a short while, and then turns blue. It used to stay white longer. It's like after a short bit of usage, it goes blue. The red light on the charger also never turns green no matter how long it stays plugged in.

The e cig stayed in the box, and the battery was depleted. I picked it up a few days ago and put it on the charger to start using it and noticed this.

Does it sound like the battery is messed up? Last night I charged it 3 hours and the red light on the charger never turned green so I unplugged it. The light on the battery was white. Today I went to use it, and the light was blue - I never used it and the e cig itself was turned off.  

with no interest in sub ohming or rebuilding at this minute what is the best standard tank to use for liquids?

I currently use a nautilus and a vision spinner 2 and have done a for a while now. The problem I have to be honest is better liquids like flavours by Joe burn the nautilus coils out within a couple of hours and fusion vapours (my personal favourite) last only days which I know isn't normal.

so to someone with a limited knowledge of vaping and looking for very easy set ups rather than technical building, what are the best tank and battery to use for a swap out coil and generally not a high power Vape ( I tend to 3.8 it)  

Hi,

I am currently using two different Vision Spinners (900mah and 1600mah). Both are variable voltage. I have paired the spinners with the Kanger2 Mini protank.

I vape at about 4.3v. I use 1.8ohm or 2.2ohm coils. I have been happy with the result so far.

I am not interested in a big old MOD or anything. I like the pen-like style.

I bought an Aerotank Mini that turned out to be a clone and it didn't work. Maybe it came with a bad clone coil? I don't know.

Any suggestions on updating the mini protank 2 and the Spinner? There are just way too many products and I have no clue where to start. The short life of the Kanger colils has been pretty annoying. I read they have better coils now for the Protank 3.

Anyway, thanks for any input on this!  

Hello,
So I recently bought an "Aspire NX30 kit" and I set everything up, I poured menthol E-liquid into the atomizer, and for some reason it doesn't taste the best. I can feel the menthol taste but I feel some burning taste too. The product and also the atomizer is brand new. Some of my friends said that the atomizer is trash, but I can't believe that a brand new atomizer is completely unusable.

Does anyone having/had this problem? What should I really do?

Thanks a lot
Have a good day.  

I hope my naivete amuses you. Lol.


I recently graduated from a 600-ish mAH ego battery to a variable voltage pink Vision spinner ego thats somewhere in the neighborhood of 1100 mAH. I am finding out that I prefer a "sweet spot" of around 4.5 v, but that it varies depending on the eliquid's nicotine content, flavor, vg/pg ratio, & even brand. I found out that certain fruity flavors can melt a plastic clearomizer. I had the Kanger T2 2.2ml plastic clearomizer and a 6mg nic 80vg/20pg cherry ejuice from Mt Baker Vapor. The cherry juice melted TWO T2 clearomizers. The drip tip melted right off the top washer/band of the clearomizer, and I'd gotten a mouthful of juice. Gross. Quickly rinsed my mouth out. Now I'm using the Kanger glass pyrex 2.4ml? Protank, and it's a better vaping experience. Heavier than the T2s tho.

I've also discovered that I REALLY like the 80vg/20pg ratio better (even though, honestly, the cherry tastes like Robutussin). The texture is noticeably thicker. It hits my throat well, but I like the moderate lung hit it gives me. I am also liking the bigger clouds that more vg and a higher voltage give me.

The downside of the ego manual batteries, for me, is that it doesn't give me enough of a hit before the led indicator light flashes several times in quick succession and it quits until I release the driptip from my mouth and exhale.

I'm glad I found my husband's spare ego usb charger (he's deployed), because I'm going through 2 of the smaller ego batteries AND draining the Vision vv.

Just for the record, I quit smoking. I'm down from the 36mg nic. ejuice to the 111-12mg, & now I'm trying 6.

One thing more I learned: change out a wick more often than once yearly.

Have a good ya'll.

--mamma from Tacoma