Leaking Tanks

I don't know if anyone has issues with their protank 2 but I hear a lot more negative than positive on them. I was messing with one of those bootleg ones and I couldn't figure out why it kept on leaking. Now just yesterday a friend gave me his protank 2 and Im guessing it was because he was tired of it leaking. When I first took it apart I took all the pieces off and connected them all again one by one making sure it was air tight as I added each piece. Everything was air tight until I got to the coil. I was taking a drag off it and it immediately started leaking and I was like why the heck does it do that? I noticed that it was leaking from between the coil and atomizer where the two little airholes are. What I did to fix this was take an old coil and gently pull off the little silicone ring (above where it says the ohms and below the wick) then I dropped it into where the coil meets the atomizer. After I just screwed in my coil and it works perfectly. No leaking whats so ever! Very good cloud production so far I recommend trying this if you have one. Sorry if someone already wrote this but I did a lot of looking around and never found an answer. Also didnt know where to post this so I apologize if this is the wrong section.  

Hello everybody,
I have a question about Sub Ohm Tank. Does every sub ohm tank has the leaking problem? I tried some sub ohm tanks. It has leaking problem more or less.I ask some people, they told me that such big tank has the leaking problem, and we can't avoid it. Is that true?  

Hello all,
I’m sure this has been discussed before as this is not a new tank, but after doing a search I didn’t find an answer. I also didn’t find much help on YouTube. I just pulled out my 2k18 doggystyle (I think that’s the correct version, it is a top fill) and built and wicked it. It has been so long since I bought this and read up on it, I don’t remember any of the tips and tricks.
As soon as I adjusted the airflow, ejuice started leaking in large amounts out of the holes. Luckily I was able to salvage most of the juice as it was premium juice I just bought from a store (not diy). What did I do wrong? Is it a wicking issue or is something else wrong? Any suggestions are greatly appreciated! Sorry if this has been covered before, but didn’t know where else to ask and I want to get this tank to work.  

Hi all,
I have used this pipe for a long time: 5pc 1.8ml Vision V.Tox BBC Bottom Coil Changeable Tank Cartomizer
it is leaking from time to time and taste burned after about a week use.

I use this juice: 30ml Dekang E-Liquid E-Juice VG Based with 21 flavor, DeKang eLiquids
DK-4.
Can anybody recommend a new ecig for me that is not leaking, not too expensive, and just work well? I did not follow the ecig evolution this last years


If anybody have any opinions about that ejuice i use please share. (Quality?/bad for health?)



Thanks  

I have a problem with the aspire atlantis leaking and its going in the drip tip and i see some of it coming out the air flow holes ived taken apart everything and cleaned and dried it for 2 days and it happened again. I made sure the coil was securely twisted on the bottom piece. Anyone know how to fix this?  

I haven't been having much luck with the two egrips I ordered. The first had broken plastic on the inside (little bits of plastic were caught in the threads, and had probably fallen into the tank). Number one is on its way back to the vendor.

On number 2, the atomizer base won't sit flush with the bottom of the device, and I think it's causing all the gurgling and leaking (e juice was also leaking out of the bottom of the device). I tried taking off the atomizer head and reseating it, and that didn't work. I'm hoping a new base might fix this problem. Any ideas?

Both devices are brand new. When I ordered the first one, I wasn't aware that it was available in a wood finish, so I ordered the second one.  

My friends been vaping for a couple months now and when she started she got a buck naked skinny. recently the tank that came with it started leaking, I'm pretty sure the tank that comes with it is a disposable correct? What would be a good starter kit for her?  

Istick 50w n subtank mini...tank is leaking a little I think I primed it too much,cotton didn't look wet so I put more in...hmm,but I am happy! Unicorn puke juice 12mg is great!  

Okay, so my partner and I have used the same Aspire Triton2 tanks for about 5 years now. They were never leak proof, but lately this problem has been getting worse and I am trying to see if the market has something better to offer. Other than the leaking problems, the Triton2 has been great. Here are some desired features that I hope to find in selecting a new rig: holds at least 3ml, long lasting coils that are affordable (around $3 ea), replaceable O rings would be nice, manufacturer that is not a fly-by-night, and hopefully leak-proof. Also I should note that I currently use 0.3ohm coils @ 38w and really have no need for very high wattage vapes.
If anyone knows of some tanks that fit the description above, I would be grateful for any suggestions on what to shop for.
Thank you and have a great Thanksgiving weekend!
~Starfield~  

Hey there guys, new here.

I have a Vappresso Revenger Mini kit and I have upgraded my tank from NRG SE Mini tank to a "Geekvape Z Sub Ohm tank(Much Larger Tank)". Because I wanted to taste more flavor and still blow lots of clouds in the air with my vaping device being fairly cheap.
I put a New Geekvape Z series coil 0.4ohm 50-60W because I burnt my original 0.2 Ohm coil , I wont talk about my previous coil. I'm getting 2 problems here.

1. I'm using 60W, normal setting and every time I vape or inhale I get a taste of E-Liquid in my mouth. However its blowing perfect clouds and still getting an amazing taste but its just that the liquid drops in my mouth. I just want to spit it out every time. How do I fix that problem?

2. The other thing is if I use Higher Wattage and High settings the liquid pours out of the air flow and starts leaking and backspits in my mouth.

(Before I vaped with new coil)I put the new coil in, I soaked it for 10-15mins, while I fill half tank of E-liquid which is 0.8Ng/0.2PG. Then I inhaled 3-4x with no button pressed. Then I vaped to test, still leaking. I set the vape to 70W and high setting then blow downwards into the device 5-6x. All I was trying to do is desaturate it. My results got better didnt notice much of a leak but I still get a little bit of liquid in my mouth. If you can help me out here, I would much appreciate it.

Thank you and kind regards

Tuatara Vaper