Compatible Coils With The Tfv-16 Lite?

Hi guys,

Is it really normal for an atomizer to get hot especially when using dual coils?
I just created a dual coil a couple of minutes ago using 24 gauge kanthal wire, 10 wraps each on a 2.4mm precision screw driver. My meter shows that the resistance is at 0.4 ohms, being curious and all since this is the first time that I made a dual coil, i decided to test it out.
Got some good flavor and vapor, though the vapor is warmer than I would want it to be ( I prefer cold vapor)

After taking a couple of 5 secs drag, I notice that my atomizer became hot, not warm, but hot. Is this something that I should be concerned about? I am doing something wrong or have I done something wrong when creating my coils?
Please help.

Here are some pictures of my device and atomizer. ( Philbox wood mod running on 2 pcs of AWT 18650 2600mah battery, my atty is Haze by vapehead origins)


 

To all the mouth to lung (Tootle Puffers) here ... There was a time when the famous "Kayfun Lite-Plus V2" was the gold standard when it came to single coil / higher ohm / low amp Tootle Puffing.

Now that this atomizer (to include all the Chinese clones of it) are so very hard to come by (to include spare parts), has anyone here replaced there old Kayfun Lites with the new "Kayfun Lite 2019" atomizer ?

I just ordered a couple of Chinese clones of the Kayfun Lite 2019 so I can make the big changeover.

Good bye to the sweet Kayfun Lite-Plus V2
Almost 6 years vaping on this
Rest in Peace ....

 

I have a full sized Nautilus, and a mini, but I don't use them because of the concern surrounding the material in the coils. I understand that at some point, Aspire is going to be putting out all-cotton versions of the BVCs. But until that happens, I'm staying away.

I happened upon the Smok Acro 5.0 on Madvapes website, and it said its coils are compatible with the Nautilus. But I can't find any information about them. Does anyone know if the Acro coils are BVC? And what materials are used?

Acro 5.0 Replacement Atomizer Coils  

Hi all,

Thought I would share with you guys, didn't place my order yet, trying to figure out how to spend my money in the angelcigs anniversary sales page Angelcigs Clearance, prices r just ridiculous, a few things i have my eyes on :

Pollux Style Rebuildable Dripping Atomizer Black 1:1
Omerta Style Rebuildable Dripping Atomizer 1:1
Venturi Kayfun Styled RDA Rebuildable Atomizer 1:1
Shield Style Rebuildable Dripping Atomizer 3 Rings
Doge V2 Styled RDA Rebuildable Dripping Atomizer
Orchid V3.5 Styled Rebuildable Tank Atomizer 1:1
AQUA V2 Style Rebuildable Atomizer RTA+RDA 1:1

Happy shopping guys  

I was talking in another thread, and the question came up that may be a good topic... for the experienced vapers, if you had to recommend one vaping setup... both atomizer and battery.... what would you recommend to someone who had.. say.. a pack and a half per day habit? I am curious as to what you would recommend to get someone to stop smoking, and it be an "end-game" product.....one they wouldn't need upgrading later. Both atomizer and device.

And yes, I know some people may turn it into a hobby like me and want to buy a variety, but I am strictly speaking for the stopping smoking part.

I'll go first...

I'd recommend an Istick 30 with a subtank mini. I think that atomizer and battery combo offers a convenient size, good juice capacity, reliable, a wide variety of vaping options, and just a good "grab and go" setup.  

Hello vapers! first! I'm a noob at this stuff because I just buy my tank and use it with the coils it comes with and second, my english isnt that good but I can understand it perfectly fine.

Anyway, Ive been searching everywhere but I couldnt find a solid answer to my question.
Im using an Aerotank Giant right now with a 1.8 ohm coil, if I put a 1.2 ohm I would have to use less voltage because I get a burnt taste and the coil burns pretty quick, Im about to order a Sub ohm tank soon and I'll use the stock coils, the one im getting is the Kangertech SubOhm tank.
Why do subohm coils use more voltage when normal coils use less?

I mean, Ive seen people do things like 0.2 ohm coil @ 100W + If I did anything over 3.5V on my 1.2 ohm coil itd burn instantly... SubOhm takes more voltage the lower you go and normal dual coils take less voltage the lower you go!

1.9 Ohm Dual coil = 3.7-3.8V for me
0.5 ohm OOC subtank sub ohm coil = 12-30W?!

Thanks in advance for taking the time to reply to this post and your patience!

Cheers!

Edit: by the way, Im planning to use my subtank with a 50/50 PG/VG 16mg nicotine, Is that ok?  

Anyone got a good solution for atomizer seats to store them on. Im gonna take a look at my local home depot see if i can come up with something.

This what they look like if you were to get from vape store.(yes there cheap but so am i )
Atomizer Seats - 101 Vape

Im open to your ideas i really dont care what it looks like long as it stands an atomizer up. I got mine proped up against stuff so anything better than that system of storage.  

Hello i need help. I have my vape in the backpack and this happend.  

I don't know if anyone has issues with their protank 2 but I hear a lot more negative than positive on them. I was messing with one of those bootleg ones and I couldn't figure out why it kept on leaking. Now just yesterday a friend gave me his protank 2 and Im guessing it was because he was tired of it leaking. When I first took it apart I took all the pieces off and connected them all again one by one making sure it was air tight as I added each piece. Everything was air tight until I got to the coil. I was taking a drag off it and it immediately started leaking and I was like why the heck does it do that? I noticed that it was leaking from between the coil and atomizer where the two little airholes are. What I did to fix this was take an old coil and gently pull off the little silicone ring (above where it says the ohms and below the wick) then I dropped it into where the coil meets the atomizer. After I just screwed in my coil and it works perfectly. No leaking whats so ever! Very good cloud production so far I recommend trying this if you have one. Sorry if someone already wrote this but I did a lot of looking around and never found an answer. Also didnt know where to post this so I apologize if this is the wrong section.  

Hello,
So I recently bought an "Aspire NX30 kit" and I set everything up, I poured menthol E-liquid into the atomizer, and for some reason it doesn't taste the best. I can feel the menthol taste but I feel some burning taste too. The product and also the atomizer is brand new. Some of my friends said that the atomizer is trash, but I can't believe that a brand new atomizer is completely unusable.

Does anyone having/had this problem? What should I really do?

Thanks a lot
Have a good day.