Hi.

Hello,
I own the SMOK Infinix for more than 3 months now. I change the cotton myself for the pod and started having issues with the device.

After 2 months it would fire a while after pulling. Fixed by cleaning the inside of the device and removing the paper cover on the sensor. Worked perfectly.

Now, few days ago, I noticed I had to pull harder for the device to activate.

And now, literally an hour ago it would stop pulling. Isolated the airflow for a tighter pull worked for couple of minutes, now it just stopped. After some blows from the charging port it would do the infinite firing bug and that's the only way I can get a hit. Please help.

P.s I did clean the inside of the device again as much as I could. It gets a really good connection, just won't fire.  

I'm not battery expert so I am not sure how everything works, but here are my concerns.

My Smok Thallo can charge at a 1.2A current but it is a USB-C, why include a USB-C if 5V/1.2A can charge as quickly with a Micro USB? I think.

So here is the question, can I charge my Smok Thallo with a 2.1A if I use the wire that came with the kit? It's hard finding a solid power bank with 5V/1A only. I cannot remove the battery, it has a built-in 3000mAH one.

Thanks!  

So i got a smok gpriv deluxe edition about 3 months ago. Its worked perfectly but then i let it sit unused for around 1 month. Now when trying to charge the batteries nothing works. Its not showing any signs of life. Im currently charging one battery in a smok grip but its still on 0 percent after 20 minutes of charging. Is it a battery issue? Or a mod issue  

I've been charging my 18650 batteries on a Nitecore charger but having to unscrew my Smok XPRO m65 is a real pain so thought I may as well make use of the USB port and charge the battery while it's still in the mod.
But I've been hearing a few horror stories of other mods such as the clouper, apparently its not safe to charger using the USB port

I'd really appreciate it if anyone can help inform me if I'd be able to use my phone charging adaptor with my mod.

The input and output specs of my phone charger and mod input are in the attached pics.

Cheers everyone  

I posted this in another user's smok m80 thread. I hope it's ok to post here too. I'm really concerned, and would like to know if this has happened to anyone else. Here is the post unaltered:

I loved the device at first, but now I am scared to use it. I had an Atlantis 2 on it, and at first, it consistently read the ohms as .39. Then it started jumping all over the place from puff to puff. It went anywhere from .39 to 1.2, always different with each puff. At one point, it even changed the watts on its own (it kept dropping them down from around 30 to around 25; it did stop doing this). So I put my kanger Subtank nano on it, at 24 watts. It read anywhere from .55 to 1.5. Then, on the last puff before I shut the device off, it read 2.62 and burned my throat really bad at 24 watts. Since it reads different with each puff, and I don't get the new reading until after I've hit the button, I cannot check what it will be before I've inhaled. I've been vaping for years, and never felt anything like this. My chest hurts, and my throat feels very sore. Contacting the vendor now, but I don't know that I would even want to use one ever again. This was scary for me. The device had the updated chip, and was not even used for more than a half a charge. (The two tanks are fine on my other mods.)

A moment agoEditReport
+ QuoteReplyTop  

So I have a SMOK M80 XPRO PLUS that I got a few days ago. Just wondering is it safe to use a phone charger to plug it into the USB port on the bottom?

My uncle, who I stay with, watched some news article about someone's battery blowing up in their apartment and just wants to make sure I am charging this thing safely. I have been using my phone charger up to this point, with no issues.

Any feedback would be greatly appreciated! Thanks!  

I just got an istick 30w the other day from a local tobacco store. I bought an istick 30w for $45 which isn't too bad, I'm having problems with it not charging to full. I am using a 1a rated charger and it is supposed to charge to full in exactly 2.5 hours with a dead battery. I cannot get it to charge above about 75-80%, no matter what I do. As of now it's been on the charger for 2 hours and 38 minutes and is at about 80%, and is showing no sign of continuing to charge.

When I leave the device on overnight, I will wake up and it will be at around 65%, and it would have just stopped charging. I don't understand.  

I stopped smoking, and started vaping 2 years & 2 months ago

My magical device was an Innokin Endura T18 vape pen, followed by the Innokin t22 kit




I would love to hear what other members used to stop smoking  

Checked out the local vape shops today. Found the rda I been wanting. A Hellvape Rebirth. Single coil adjustable draw. Didn’t have to order it. Now I can stop bugging everyone.
And a Smok Mag P3 followed me home. Plus found a RY4 I can live with. Life is good.  

hey everyone i have a Smoke M50 with a new Arctic tank and it works fine with the .5ohm coil but i can t get it to work with the .2ohm coil and i cant figure out why. my friend has a sigelei 100w + and it works fine on his ugh..... if someone can help that would be awesome