I know the topic of how to get VG film off glass surfaces has been well explored in past threads. But I just "discovered " by rinsing my reading glasses off in plain tap water and a good wipe dry with a paper towel that water will clean it. I'm gonna do that to my car if I ever get out of the house long enough to do something useful. I've tried various glass cleaners and they never seem to get it all. But water did on my glasses so...just a thought..
Vaping rocks.... But cleaning this stuff off my car windows is worse than smoking ever was. I've read threads about people having it on their TVs and glasses. I have yet to experience that. Does anyone have it gather on their walls? What is it? Can't be water because it evaporates off. I'm curious to know what this residue is....
I can't make myself drink water and coconut water taste like dirt to me. What else is good to keep you hydrated?
So I've been vaping 4.5 years now. Really still a low watt tootle puffer. I probably vape 6ml or so a day now and that has been as high as maybe 10 ml a day. For about my first 3 years I vaped 50/50, for the past 1.5 years mostly 70/30. Not one cig and yes, all bad physical signs from ciggies have appeared gone for ages now. All my juice has come from very well known suppliers.
I could/should? have taken a couple pics but I think I can describe the situation adequately.
I drive a 5 door Ponitac Vibe. I got it in Jan before I started vaping in April of 2015. So yes, I did smoke in this car for about 2.5 months. Still, I've Vaped in it Daily for at least 20 min a day for 4.5 years now.
Yes, I AM probably a pig but I still haven't felt the need to clean the inside of my car windows until recently. On the drivers inside window I've noticed a clear, flaky film on my window, bad enough that it's started to actually flake off. Interesting. One important note, I had the full inside tinted the month I bought the car so the windows were essentially sterile when I started vaping inside the car.
I critiqued things carefully. The film was by far the worst on my window. Next came the window Behind me. Next came the front passenger window with the cleanest being the passengers rear window. This makes perfect sense as the car HVAC is 100% aimed at me. There Really Is Nothing Else the flaky film can be but vape residue. Arguably very similar to what has actually been going into my lungs. Again, medically, I have no known respitory issues.
My tint peeps said clean with just warm water with a few drops of Dawn dish detergent. You'll recall that Dawn is what they use to get crude oil off of birds caught in oil spills, how be it much stronger amounts of Dawn than I'm using. So I got some micro fiber and *important* water As Hot As I Could Stand, Easily 130-140F and a dribble of Dawn in about a 1/2 gal container. This again was the reco from the tint folks to not damage the tint when cleaning it.
Now comes the scary part.
VERY Hot Water, light Dawn and Heavy elbow grease with the micro fiber were Barely Able to remove the vape residue. These were WAY WORSE conditions than I EVER want inside my lungs (to clean). Honestly, it took Three Heavy go arounds to get probably 95% of the residue off. Even Worse was honestly, I don't think the Very Hot water and Dawn were effective At All against the film. (??!!) Most of the film came off from elbow grease After the window was dry from any cleaning juice. Pg and Vg are Supposed to be water soluble and Water Soluble IS what you want near your lungs. My personal experience here Does Not bear out the Totally Water Soluble point, at least not to me anyway.
This is pretty damn scary if you ask me. I enjoy vaping but this will have me switching to 3mg juice Soon in preparation for quitting. As I said, I've already been decreasing my vape amounts before this.
I am not a Dr or a Chemist but I am fairly certain of this.
What I was almost not able to remove from glass was definitely vape residue.
It is logical to assume the same deposits that were on that glass are inside my lungs. BOTH have been exposed to vaping the same amount of time.
Honestly, to me, thus means a Much Higher Chance of some serious respitory issues from long term vaping.
Bruce in Ocala, Fl
My stats:
I vape .5 ohm, with dual coils
I vape 6 mg nic
I vape around 25-30w
I've been home sick so I've been vaping a lot more than usual. Even when I'm at work, I drink a lot of water. I am just constantly thirsty.
I also take medications for bipolar disorder and mood stabilizers. I don't think these have anything to do with it.
Either way I am going through water and pissing like crazy. And not just water, milk, pop too.
Help?
Hi,
Just wondering how to get a good clean of dirt and juice residue buildup on airflow base part for tanks and rda's. I find this part to be the hardest to clean. Not sure if you can run it under water or just try and get into the itty bitty cracks and crannies with a paper towel like I currently do. The tanks I use are mainly Nautlus Minis and Subtanks. The RDA's are freakshow, derringer, tobh, magma, etc. HOW do you get a good clean on the AIRFLOW CONTORL BASE/VALVE?
Hi! so i broke my tank glass and i need to replace it asap,the thing is the exact same glass for this tank is hard to find, is there any other compatible glasses for this tank?
I know the general recommendation is to use Everclear or vodka. I haven't had a drink of alcohol in 22 years, but I see no good reason to keep a bottle of potable liquor around for cleaning my gear if there is reasonable alternative. I just bought a bottle of 70% Isoppropyl alcohol for this purpose from the drugstore. It should be a better solvent than vodka at 140 proof, and it evaporates cleaner than ethyl alcohol. A water rinse should remove any unevaporated alcohol, not that there is much chance of harm from inhaling a miniscule amount of isopropyl. I currently dunk my minipro heads in near boiling water, then rinse in running hot water, which works reasonably well on the exposed wick but probably doesn't do jack for the portion inside the coil.
I’ve had a couple njoy batteries that I’ve replaced when the times come. I just got a brand new one yesterday and it fell in water. I’ve put it in rice and it hits okay but once I hit it the light stays on afterwards for a long time. And the light is faint and flashing when it’s on the charger. Is there anything I can do to fix it?
I found that drinking Brisk ice tea helps with flavor fatigue and it just taste so good! its my go to vape drink!!! (water just swishes the flavor around in my mouth and does not help) no worries though I still drink plenty of water. So what are some of your guy's n' gal's favorite thing to drink while vaping? I want to see what else people do
Just watched a news video... "Vape pen charger explosion"
Vape pen charger explosion causes thousands of dollars worth of damage to California woman's home
The lady was charging a vape pen and the charger "explodes" causing a nearby paint can to shoot up into the ceiling. The fire dept guy says "those lithium ion batteries..." and so on. Now wait just a minute! Technically, it wasn't a "vape charger" and they showed the vape pen looked fine. Pens don't come with a charger, just a USB cord, so it was just a universal USB charger (like for phones, ect) and the pen battery didn't explode. Also, why did she have a paint can sitting next to it? Did she leave the vape pen on (might not matter)? Was the USB cord damaged (short)? Pens use a LiPo battery not Lithium Ion. I know I'm nitpicking, but all people will really "hear" is vape pen explodes... nobody really thinks things out. Could this have happened anyway while charging a phone or something else? Right after watching this, I see an article in the local paper telling people to stop vaping immediately because of the recent events (and they don't mention ANYTHING about the real cause!) Final thought: there was also a water bottle next to where the charger was... maybe she spilled water on the charger? I'm like Peter Falk in the old TV show Columbo... "but what got me thinking was..." Maybe I overthink things, but at least I do think (and ask questions)