Atomizer Storage

So, I recently discovered that I had more RDAs than I knew what to do with. Faced with this realization, I decided a case was in order. This is what I settled on. Anyone else with this issue have any other solutions?


https://www.amazon.com/gp/aw/d/B085NMSWB5?psc=1&ref=ppx_pop_mob_b_asin_image  


Similar Content



Battery Storage/transport

Looking for any good suggestions on battery storage and transport. I've searched around on here and don't seem to see a whole lot of discussions on the topic. Some that I've seen include medicine bottles (free if you have 'em) and the Krazy Glue storage tube

I loved this thought and found it for $1.50 on Amazon (as an add-on) but looking for other ideas. Thanks!

 

Atomizer Seat

Anyone got a good solution for atomizer seats to store them on. Im gonna take a look at my local home depot see if i can come up with something.

This what they look like if you were to get from vape store.(yes there cheap but so am i )
Atomizer Seats - 101 Vape

Im open to your ideas i really dont care what it looks like long as it stands an atomizer up. I got mine proped up against stuff so anything better than that system of storage.  

Decent Multimeters Under $100?

I've recently started using 18650 batteries a lot along with a dedicated charger. I own a few rebuildable atomizers and a high wattage device. I also have a mechanical 18650 on the way. I want to look into getting a multimeter for purposes of checking battery voltage and checking atomizer resistance via 510 pin.

I've read a lot about the Fluke multimeters and they seem really great for the price, but the price is still up there. I wanted to know if anyone had any suggestions on a inexpensive but decent digital multimeter.

I've been looking at this list of multimeters:
https://toolsreviewer.com/top-10-best-multimeters/

I like the this one so far:
http://www.amazon.com/gp/product/B0...N=B000EX0AE4&linkCode=as2&tag=toolsreviews-20

Anyone have recommendations?
Thanks  

Underrated Rdas

This isn't a review or bashing of other RDAs.

I want to hear from other people what RDAs they are using that they feel are very underrated than the more popular ones out there.

I'll start off by saying that I think the Lycan RDA by Cigreen is WAY underrated. By far the best RDA i own with countless options for airflow and drip tips.

What RDAs are you guys/gals using that you feel need some love!?  

Angelcigs Sales

Hi all,

Thought I would share with you guys, didn't place my order yet, trying to figure out how to spend my money in the angelcigs anniversary sales page Angelcigs Clearance, prices r just ridiculous, a few things i have my eyes on :

Pollux Style Rebuildable Dripping Atomizer Black 1:1
Omerta Style Rebuildable Dripping Atomizer 1:1
Venturi Kayfun Styled RDA Rebuildable Atomizer 1:1
Shield Style Rebuildable Dripping Atomizer 3 Rings
Doge V2 Styled RDA Rebuildable Dripping Atomizer
Orchid V3.5 Styled Rebuildable Tank Atomizer 1:1
AQUA V2 Style Rebuildable Atomizer RTA+RDA 1:1

Happy shopping guys  

What The Hell Is It With Vapordna's Project Subohm Rdas?

I have bought four RDAs from VaporDNA, all Project Subohm. First was the CLT V3 Infinite.

It read at a 0.09ohms on my reader unbuilt. So I emailed them, and they sent a replacement. In the mean time, I managed to fix the first one. The second one also read at a 0.09ohms on my reader, but I managed to fix that one, too. (BTW, by "fixed", I mean "got to read at a 1 on my ohm reader unbuilt). Bolstered by my experience being easily able to fix the CLT, I ordered a Swirlfish. Same issue, but this time, I couldn't fix it.

Got a replacement, same issue, only, again, couldn't fix it.

Figured "third times the charm", though, and got a Mutation V3. It read at a 1 on my ohm reader. Made me so frickin' happy, I got a third Swirlfish... which failed again and I couldn't fix it.

However, the new Mutation V4 came out, and since the V3 came perfect I went ahead and bought it...

Well, it's reading at a 0.08ohms unbuilt, and I can't fix it. I don't even want to email them for a replacement, because I'm fully expecting it to be the same, and I'm really sick of this same thing over and over again. VaporDNA's customer service is wonderful and the response time is almost lightning fast, but a) this is product after product, b) you can't tell me they aren't getting sick of hearing from me, and c) if I'm the only one they keep hearing about this from, there's no way it isn't starting to look suspicious.

But there is simply no way I'm the only one experiencing this. It's not my ohm reader, which has fresh batteries and reads all un-shorted, built RDAs accurately. And yet I still got a Smok Omnitester which is on its way, just in case.

So what in the hell is going on, here? I may get a regular, non-Project Subohm Mutation V4 from somewhere else and just get my money back on this one or something, but I'm really at the end of my patience with this. It's ridiculous.

If you get Project Subohm RDAs, please check them on your ohm readers. Somebody... please somebody... say I'm not alone in experiencing this.

Please.  

Atomizer Problem - Aspire Nx30

Hello,
So I recently bought an "Aspire NX30 kit" and I set everything up, I poured menthol E-liquid into the atomizer, and for some reason it doesn't taste the best. I can feel the menthol taste but I feel some burning taste too. The product and also the atomizer is brand new. Some of my friends said that the atomizer is trash, but I can't believe that a brand new atomizer is completely unusable.

Does anyone having/had this problem? What should I really do?

Thanks a lot
Have a good day.  

Gfv Coil Building Tool Kit 8 Pieces Universal Household

GFV Coil Building Tool Kit 8 Pieces Universal Household..

Sorry for the bold, cut and past... I just wanted to throw this out there for anybody looking for a reasonable priced tool kit. I got this from amazon for $32 and it has everything you need except an ohm reader. I purchased the two from amazon with the mini tab v2 and the case and tools were a POS. I used the alien coils and cotton included and was astonished with the flavor. Good buy  

Anyone Order From Fast Tech Recently?? See Here...

Never had these issues before & this is VERY STRANGE trying to place an Order with Fast Tech:

1) was about to Check Out with a Vapresso Zero Pod & some extra replacements.

2) decided to add some nicQuid to Shopping Cart & the entire order could NOT be shipped to d'USA.

3) deleted the nicQuid, tried to Check Out, & you could pay ONLY via Crypto, or a "Gift Card".

4) tried to fund a Gift Card but the increments JUMP from $25 to $50 so it goes way over my total price.

Are eCig websites in China also facing restrictions?

NEW Pod - Halo Zero

ADMIN - i see there is another similar thread - feel free to delete this one if necessary. THX  

A Shout Out To My Local B&m

A few weeks ago I purchased two UD Goliaths the same time the Lemo 2 was on pre-order. Well, it had been really bugging my that I just did not go ahead a buy one when I had the chance. I debated on selling the Goliath on eBay, but then I thought to ask this B&M up the street if they would want to trade with me. I had talked to the owner a few days before and he told me that he had really wanted to get some for his case, so I knew that the odds were in my favor. Anyway, I was just up there as asked him if he would be interested. Guess what? I have the Lemo 2 It was really cool of him to do that considering he is in the business to make money, not trade RTA's This vapes for you Jay!!